Your cart is empty.
Your cart is empty. About CHINS inverter control integrated machine
A new type of multi-function solar energy storage inverter control integrated machine,
integrating solar energy storage & mains charging energy storage, AC sine wave output,
using DSP control, through advanced control algorithms, with high response speed, high
reliability and high industrial standards features.
AC mode
Rated input voltage: 110Vac/120Vac
Input voltage range: (90Vac-140Vac) ±2%
Frequency: 50Hz/ 60Hz (auto-sensing)
Frequency Range: 47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz)
Overload/short circuit protection: Breaker
Efficiency: >95%
Conversion time (bypass and inverter): 10ms (typical)
AC reverse protection: yes
Maximum bypass overload current: 63A
Inverter mode
Output voltage waveform: Pure sine wave
Rated output power (VA): 5000(4100/4300/4500)
Rated output power (W): 5000(4100/4300/4500)
Power factor: 1
Rated output voltage (Vac): 120Vac(100/105/110Vac settable)
Output voltage error: ±5%
Output frequency range (Hz): 50Hz ± 0.3Hz/60Hz ± 0.3Hz
Efficiency: >90%
Overload protection
(102% (110% Load >125% ±10%: report error and turn off the output after 5 seconds;
Peak power: 10000VA
Loaded motor capability: 4HP
Output short circuit protection: Breaker
Bypass breaker specifications: 63A
Rated battery input voltage: 48V (minimum start voltage 44V)
Battery voltage range: 40.0Vdc~60Vdc ± 0.6Vdc (under-voltage alarm/turnoff
voltage/over-voltage alarm/over-voltage restoration…settable LCD screen)
Power saving mode: Load ≤50W
AC charging
Battery type: Lead acid or lithium battery
Maximum charge current: 40A
Charge current error: ± 5Adc
Charge voltage range: 20.0Vdc~33Vdc
Michael
Reviewed in the United States on October 8, 2024
Hooked up AC power -- but no display. No support -- not even any company contact info / email address.Returning it.
Customer
Reviewed in the United States on July 21, 2023
It comes configured for lead acid battery, and the entire unit will remain unpowered if you hook up LiFePO batteries + the AC.. So, wire the AC only at first, then configure the battery settings. Then you can connect the battery.Using this on a boat, Marina lost power in a storm and I didn't even notice. Switches between power sources in milliseconds so there's no flicker or anything.
Recommended Products
