Your cart is empty.
Your cart is empty. Package included:
4 × micro 2 Fuse holder with connect terminals
2 × 5A blade fuse
2 × 10A blade fuse
2 × 15A blade fuse
1 × Fuse puller
Size:
Total length: about 17cm/ 6.69in
Cable length: 16cm/ 6.3in
FILIP BRIERS
Reviewed in the Netherlands on February 20, 2025
Zeer goede verkoper,,product zoals beschreven
Customer
Reviewed in the United States on January 20, 2025
Works perfectly!
Lili
Reviewed in the United States on August 20, 2024
This fuse tap kit is a must have for anyone working on automotive electrical projects. The quality of the fuse holders is excellent, providing a secure connection without any hassle. The included wire harnesses are durable and make the installation process straightforward. With the variety of fuses (5A, 10A, 15A) included, I had everything I needed for my setup. The fuse puller is a handy addition that makes swapping out fuses quick and easy. Overall, this kit is well worth the investment for its reliability and convenience.
J. Parrott
Reviewed in the United States on December 10, 2024
These worked great for my Dash Camera install on my 2017 F150. They fit into the fuse slot on my truck with no modification (some fuse taps are bigger than the slot and have to be shaved down). I was very happy to find they fit without any extra effort.The fuse tap can be installed in either direction on my truck. I have attached a diagram of possible fuse tap orientation. The more correct way is to install the tap so both the original fuse and the new fuse get power independently (top fuse tap in the diagram). On my F150, if the pigtail of the fuse tap is pointing toward the engine, that would be the preferred orientation (both new and original fuse get power independently).If you have to install the tap in the other orientation (bottom in the diagram) both the new load and the original load draw power across the original fuse. Most of the time that is not going to be a problem as long as the original fuse does not have a heavy load on it.You can easily test your orientation by installing the tap without the original fuse installed but with the new fuse you are adding installed. If you get power then you are in the preferred orientation. If you only get power when both the original fuse and the new fuse are installed, then you are drawing both the original load and new load through the original fuse.
Grumpa
Reviewed in the United States on November 6, 2024
In the age of blade fuses, not all are the same. The original blade fuses were moderately sized, followed by the mini blade size most have seen over recent years; however, as I discovered in my 2020 Hyundai, the mini blade fuses are still larger, and require the "MICRO" sized fuses and blade fuse tap. These fill the bill perfectly and with the provided insulated connector ends and extra fuses - are worth the price. ** A word of advice- watch a YouTube video on the proper way to install fuses (the original circuit fuse and the added tap fuse), and make sure to know the "powered side" vs the accessory side of the fuse socket, which also dictates which way/direction to insert the tap.
Paul
Reviewed in the United States on November 17, 2024
This kit had everything I needed. My dashcam came with a hard wire kit but it had the wrong size fuse splitter. I ordered this kit to complete the install. The kit came with the correct fuses I needed and the plug was the same as the one on the hardwire kit so I did not have to splice any wires. Complete plug and play. The only issue was the enclosed fuse puller was too wide to remove the fuses from the fuse box.
大好き
Reviewed in Japan on November 17, 2024
バッチリでした。
TOD ESTILL
Reviewed in the United States on October 7, 2024
Fits perfectly in my fuse panel. Micro 2 is smaller than mini micro with 2 blades. Excellent product!
TLN
Reviewed in the United States on January 2, 2024
Works fine. The fuse remover clip is useless.
Luis
Reviewed in Spain on July 23, 2023
Ideal para colocar una dashcam
Michael J.
Reviewed in the United States on June 6, 2023
I purchased this item to install LED lights under the dash of my car. I did not want to use the DC adapter for the power, so I decided to hardwire the lights to my fuse box. Please note to make sure you order the proper kit for your vehicle, as there are different sizes of fuses. The easiest way to get the right set is to simply remove one fuse and compare it to the 4 different fuse sizes. The one that matches (in my case was the micro2) is the set you need to purchase. Very simple to use and it comes with fuses that you would need. This kit essentially allows you to provide power to two devices using the same fuse slot. I connected my lights to only turn on when the key is in ACC mode (not running) and when the vehicle is started. When I turn the car off, the lights turn off as well so it doesn't drain the battery. Kit works perfectly and comes with 4 adapters, so if you need to hardwire something else like a radar detector or dashcam kit, you will have what you need already.
AussiePeterJ
Reviewed in Australia on May 13, 2023
For my application the leg length down to the original fuse is a bit short and so it doesn't seat as well as I wanted but it's a good quality item.
Magnus Wahlberg
Reviewed in Sweden on August 16, 2021
Mitt val när jag installerade Dash-cam med parkeringsläge. Tänk på att vända säkringshållaren rätt för full funktionalitet. (Ström in på vänster stift om kabeln pekar åt höger).
Recommended Products
