Your cart is empty.
Your cart is empty. with time-division duplexing(TDD) method of WLAN and using rapid micro detection technology to provide high linearity amplification. The signal booster can work with most WLAN/WiFi devices, BT, ZigBee and increase the signal strength, therefore a larger WLAN coverage and more stable transmission rate.
Specifications:
Frequency : 2.4-2.5GHz
Operating voltage: 6-16V
Receiving gain: 10dB±1
Transmission gain: 13dB±1
Input trigger power: 3dBm(min), 20dBm(max)
Max output power(P1dB): 36dBm(4W)
EVM: 3％@28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
DC supply t: 435mA @ Pout 28dBm 9V
Noise figure: ＜2.5dB
TX/RX switch time delay: ＜1us
LED indicator: Transmitter: green, receiver: red
Operating ambient temperature: -40℃~70℃
Operating humility: Up to 95％ rel. humidity
Item size: 8.2 * 5 * 2.1cm / 3.22 * 1.96 * 0.82in (L * W * H)
Item weight: 181g / 6.39oz
Package size: 21 * 12.5 * 5cm / 8.26 * 4.92 * 1.96in (L * W * H)
Package weight: 381g / 13.43oz
Applications:
Wireless LAN 802.11b/g/n access point clients.
Based on the 2.4GHz WLAN wireless base stations.
Based on the 2.4GHz WLAN wireless bridges.
Indoor distribution systems (multi-play) in the combiner.
Based on ZigBee, BT protocol wireless devices.
Installation Instructions:
Step1: Disconnect the power supply to AP/Router.
Step2: Detach the antenna from your certified wireless AP/Router.
Step3: Connect RG316 cable (included) to the booster and AP/Router.
Step4: Connect the antenna to the other end of the booster.
Step5: Connect the power supply to the booster first and subsequently the AP/Router.
Package List:
1 * 4W signal booster
1 * Power adapter
1 * 20cm RG316 cable
1 * 5dBi antenna
1 * User manual (English)
Mike
Reviewed in the United States on December 28, 2024
I used this to boost the signal of a wireless surveillance camera. It made a huge difference in the signal and now the camera works great.
Zac
Reviewed in the United States on November 26, 2024
This isn't legal at all. You can transmit 1/4w, not 4W, lol. Might be a typo.
Michael J. Pressley
Reviewed in the United States on November 11, 2024
Like my title says, this device did not do a thing. I hooked it up to the wifi modem in an LED sign at church in an effort to improve connectivity to the sign. The sign is changed through an app that connects via wifi and with just an antenna hooked up you have to stand right beside it with the panel open to connect. I hooked the device up paying attention to the polarity, all of the connectors are RP-SMA. Saw zero improvements in connectivity.
Jordan Greytak
Reviewed in the United States on November 11, 2024
Added this for a zaxom unit for audio and time code on films and commercials. Tested with the unit in my basement. Before the booster could barely get out of the house, after got 4 houses down the road.
Recommended Products
