Your cart is empty.
Your cart is empty.Product Description
HC-SR501 PIR Motion Sensor
Human Body Pyroelectricity Infrared PIR Motion Detector Sensor Module
- Operating voltage range: DC 4.5-20V
- Quiescent Current: <50uA
- Trigger: L can not be repeated trigger/H can be repeated trigger (Default repeated trigger)
- It has pin header to select trigger mode
- Delay time: 0.5-200S (adjustable) the range is (0.xx second to tens of second)
- Block time: 2.5S (default)
- Can be made a range (0.xx to tens of seconds)
- Board Dimensions: 32mm*24mm
- Angle Sensor: <100 ° cone angle Lens size
- HC-SR501 Sensor Diameter: 23mm(Default)
Usage
This PIR motion sensor can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices, it is a high tech products.
- Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems.
- Also, it can work with Arduino or Raspberry Pi projects.
- You can use these sensors to connect lamps at home as well.
Package Included:
- 5 X Stemedu HC-SR501 PIR Infrared Motion Sensor
Adjustable Delay Time
- With induction blocking time (default setting: 3-4 seconds): After each induction output (high level to low level), the induction module can set a blocking time immediately, and sense in this time period The device does not receive any induction signal.
- This function can realize the interval work (induction output time and blocking time), and can be applied to interval detection products; at the same time, this function can effectively suppress various interferences generated during load switching.
Features
- 1. Fully automatic induction: When someone enters its sensing range, input high level, and when people leave the sensing range, it will automatically delay and turn off high level. Output low level.
- 2. Photosensitive control (optional): The module has a reserved position, which can be set for photosensitive control, and does not sense during the day or when the light is strong. Photosensitive control is an optional function, and no photoresistor is installed at the factory. If necessary, please purchase the photoresistor separately and install it yourself.
- 3. Two trigger modes: L can not be repeated, H can be repeated. It can be selected by jumper, the default is H.
- A. Non-repeatable trigger mode: After the high level is sensed, the output will automatically change from high to low as soon as the delay time ends.
- B. Repeatable trigger mode: After the induction output is high, during the delay time, if there is a human body moving within its sensing range, its output will remain high until the person leaves. The delay will be high. The level changes to a low level (the sensing module will automatically extend a delay time period after detecting each activity of the human body, and the time of the last activity is the starting point of the delay time).
- 4. Micro power consumption: 65 microamps of quiescent current, especially suitable for electrical products powered by dry batteries.
Instructions for use
- 1. After the induction module is powered on, there is an initialization time of about one minute, during which time the module will output 0-3 times at intervals, and enter the standby state after one minute.
- 2. Try to avoid interference sources such as lights directly on the lens on the surface of the module, so as to avoid introducing interference signals and causing misoperation; try to avoid the use environment The wind will not flow, and the wind will also cause interference to the sensor.
- 3. The sensing module adopts a dual-element probe. The window of the probe is rectangular. The dual elements (A-element and B-element) are located at both ends of the longer direction. When the human body walks from left to right or from right to left, the infrared spectrum reaches the dual element. There is a difference in the time and distance of the sensor. The larger the difference, the more sensitive the sensor. When the human body walks toward the probe from the front or from top to bottom or from bottom to top, the dual element cannot detect the change in the infrared spectrum distance, no difference Therefore, the sensor is not sensitive or does not work; therefore, when installing the sensor, the direction of the dual element of the probe should be as parallel as possible to the direction where the human body moves the most, so as to ensure that the human body is sensed by the dual element of the probe when it passes by. In order to increase the sensing angle range, this module uses a round lens, which also makes the probe sense on all sides, but the left and right sides are still larger than the upper and lower directions, and the sensitivity is stronger. The installation must still follow the above requirements as much as possible.
Alexander
Reviewed in Canada on February 20, 2025
very pleased, arrived on time, everything works
Aleia Matthews
Reviewed in the United States on September 5, 2024
works as intended
Kindleのお客様
Reviewed in Japan on June 11, 2024
類似製品が多く迷ったのですが、価格もお手頃だったので購入しました。商品到着後、早速使ってみましたが問題なく動作しました。商品到着も早く、梱包も１個ずつ個包装されており、信頼できると思います。また利用させて頂きます。
Ariel
Reviewed in the United States on November 16, 2024
Bien
Phlogiston
Reviewed in the United States on January 4, 2024
The media could not be loaded.
Jake
Reviewed in the United States on December 6, 2023
So my fiancé had the idea to have a Shrek themed party and I thought it would be a great idea to have a speaker yelling at people 'WHAT ARE YOU DOING IN MY SWAMP'. So I bought these PIR sensors and hooked them up to my Pi 3 and programmed it to play a sound on detection. These are very sensitive so I recommend hiding them so they can only sense one direction.
Customer
Reviewed in Canada on December 23, 2023
I haven't used them yet sorry
Joseph St Lucas
Reviewed in the United States on April 7, 2022
Hooked up to 5V supply, output toggled from high to low as the description says, tweaked the pots on it to play with it, they work also. Now to figure out what the heck I want to use these with, I bought them for Halloween stuff.
Greg C.
Reviewed in Australia on September 14, 2020
These sensors did exactly what they were supposed to do. they were easy to hook up to an Arduino and use in a sketch.
Customer
Reviewed in the United States on July 28, 2020
As per the HC-SR501 data sheet, stops detecting ("detection range is shorter") as temperature approaches 30 degrees celsius (approximately 90 degrees fahrenheit). These units have the through-holes to add a thermistor to improve high temperature performance, if one has a thermistor to add.The real test is if starts detecting again when the temperature drops. I plan to drop my score one star for each unit that permanently fails on me.Worked just fine the first three days I had it connected. Easy to set up. Pins fit well into female Dupont wires for prototyping.
MG Bear
Reviewed in Canada on April 23, 2020
When I received the product I immediately connected the PIR. The output was 3.5 volts regardless of the input power. I assumed this was a defect in the product. NOT THE CASE. The product works great and the setting are very good. You can set up the output to stay on for 5 sec to 5 minutes. In my case, that is exactly what I needed
Ron B
Reviewed in the United States on September 16, 2019
I used one of these PIRs to activate a DC switching circuit, that I also got on Amazon, in order to control a linear actuator for a Halloween decoration. I used this PIR because it has adjustable timing.
Zach
Reviewed in the United States on November 21, 2019
So here's the thing, they work great; if they work at all. 3/5 of the sensors I received always either failed to detect any movement or constantly registered everything as movement. I decided to give it the benefit of the doubt and try and remove any possible interference and no dice. It wasn't until I tried my 4th sensor that things magically started working, and to be honest, I don't even know if the 5th one works as I'm too afraid to mess up my current setup.
Recommended Products