Your cart is empty.
Your cart is empty.Product Description
10 mm Widen Turbo Rim
10mm wide Turbo Rim provides longer service life and faster, smoother cutting
1.5 mm Thickness
Super thin design can reduce cutting resistance and increase the sharpness of the saw blade. Reduce material loss when cutting stone and cut fast
7/8" Arbor
It can be used with other sizes of cutter shaft reducing washers for use on multiple tools
Wet & Dry Cutting
Dry/Wet Cutting for Concrete, Brick, Block, Stone, Marble, Porcelain, Granite
TUBRO RIM & SUPER THIN
MULTI-APPLICATION
Bert
Reviewed in the United States on February 7, 2025
Did the job well.
Reha
Reviewed in the United States on September 30, 2024
Diamond saw blades designed for faster, smoother cuts, provide smoother surface.suitable for both wet and dry cutting. masonry cutting including concrete, block, brick, paving stone, stone, marble, porcelain.granite and tile.
AllDone
Reviewed in the United States on September 25, 2024
We've been using the first grinding disc daily for the last 8 days since we received it and it's just as good as the first day we started using it. I'm sure this five pack will last us several months. It's a nice, tight fit and you can't beat the price compared to big box stores. The cutting is precise with no evidence of chipping on the tile or concrete that we just finished. I would definitely recommend
L1Pa
Reviewed in the United States on September 19, 2024
These cut bricks and leave a nice flat surface without chipping edges or corners. They fit my grinder and run with no vibrations indicating they're well balanced.
SuperBoppy
Reviewed in the United States on September 16, 2024
I tried using these wheels both dry and wet. When used dry, they generated a lot of heat at the cutline, turning it bright orange with sparks coming off. I tried it on tile, concrete and refractory brick. The dry cut was very slow, and left black marks on the material (see photo).Using the wheel with water, however, was a different story. The wheel cut like butter through the ceramic and concrete. All is takes is a little trickle of water from a hose or squirt bottle. This made a world of difference.I can recommend these wheels if you are cutting with water present, but they are very inefficient when trying to do dry cutting with them.
Nate D.
Reviewed in the United States on September 15, 2024
The diamond saw blades performed well when dry cutting through brick or masonry pavers. With the smaller 4 1/2 inch blades, the cut depth is limited to a little over one inch. This meant that it was necessary to cut both sides of the pavers (which were around 2" thick). The cut surface was smooth enough for fitting pavers together with a small gap, significantly better than I have achieved with a masonry chisel in the past. Dry cutting does produce a lot of dust, so recommend using a shop vacuum and a mask. The thinner blades help by requiring less material to be removed during the cut. The surface paint wears off quickly, but the diamond blades hold up through a lot of cuts.
Steve
Reviewed in the United States on October 4, 2024
Nice disks. Cuts well. Durable and easily useable. Definitely recommend.
Greg & Nicole
Reviewed in the United States on October 15, 2024
These are pretty decent for the pricing. They cut through stone and pavers nicely with the diamond blade, and they fit snuggly onto my angle grinder. The cut quality is nice and smooth. Only downside is the blades seem to dull out before much use. So I guess there is a trade-off for the price. If you're doing a lot of cutting of thicker pieces, it might wear down a lot quicker, so I guess it depends on the project you're working on.
Recommended Products