Your cart is empty.
Your cart is empty.Product Description
EXCELLENT PERFORMANCE
High RMP, Outstanding Thrust and Turbine-like Sound
Galaxy X6 64mm12-Bladed 4S EDF System with 2840-KV3200 Outrunner Brushless Motor
Galaxy EDF power systems were originally designed by Xfly-model team based on strong theory and repeated practice. From market demand, product design, simulation, product optimization to mass production, the whole process requires professional knowledge of hydrodynamics and structural mechanics for making the EDF units excellent in overall efficiency and sound effect.
Xfly-model team uses advanced molding design, strict tolerance match and mechanical processing with high precision to eliminate vibration source and finish the product assembly. Not much manual modification is required to reach dynamic balance and speedy running.
Xfly-model team ensures product optimization for EDF power system will be continued and we will strive for improvement on both thrust and sound effect with no limits.
STRUCTURE
Laser technology used on the CNC metal spinner surface makes the spiral pattern look real and beautiful. Through advanced processing, EDF and blade surface give you a sense of matt finish.
THRUST
The thrust of inrunne 2840-KV3200 motor with high efficiency, combined with optimized design of EDF and blades, can reach 1250g when being powered by Lipo battery.
DESIGN
Streamlined design combined with CFD simulation analysis can effectively reduce noise and make sound effect more lifelike during high-speed operation.
MATERIAL
Xfly-model EDF uses composite materials with high strength and tenacity. No extra reinforcement needed. No resonance caused easily.
Special design on the radius and curvity for EDF front edge ensures sufficient air intake.
Good coordination of blades and flow deflector allows speedy spiral airflow to discharge smoothly and keep the airflow dynamic energy loss to the minimum.
The combination of high-precision mould manufacturing and advanced injection-molded technique ensures the consistency of fan blades and makes it easier to reach dynamic balance. 0.3mm distance between blades and shell is kept to ensure the excellent performance.
Jozef
Reviewed in the United States on March 21, 2024
This EDF is working as described. Weight of my 3D printed jet was 1200 grams and wing span is 70cm. It was flying without any issues. Make sure to use strong esc and good battery. Mine was 200 gram 30/60c 3800mAh and 80A esc.
Ronna P
Reviewed in the United States on December 6, 2024
Some of these fan units are very expensive and I didn’t wanna throw out a lot of money on one just to fix a foam jet. I subbed this one in and it flew pretty well. Not a tremendous amount of power, but it’s flying. Requires nearly full throttle the whole time. If you’re not looking for stellar performance, and you crash a lot, I’d say this is worth it. I used it with a 4 cell Lipo and a 40 amp speed controller.
james emerson
Reviewed in the United States on January 9, 2024
I didn't expect much for its size but paired with an 80 amp esc and a 4s it has some grunt. Time will tell once the plane I'm building takes its maiden flight but on the test bench in the plane its smooth and moves a ton of air at full throttle even on only 3s.
Nick
Reviewed in the United States on July 19, 2023
I bought this unit to replace a 64 mm FMS unit on my F 16. The stock unit gave the plane a close to 1:1 thrust to weight ratio at around 800 g thrust to give or take 800 g weight. The thrust output of this new unit is a significant increase. It can be felt, pulling harder even in the hand before a throw a lunch, and while the model was not lacking in vertical performance originally it’s vertical performance has increased significantly, I can maintain speed in a vertical climb with half throttle or slightly more and gain speed with a full throttle vertical . Xfly EDF units will be my first choice from now on!
mark
Reviewed in the United States on February 11, 2023
Upgraded in a freewing f22 and went from roughly .8/1 thrust to about 1.5/1. Way louder jet sound. Less motor whine. Wayy more speed.
Customer
Reviewed in the United States on June 27, 2022
This will create an awesome amount of thrust but be quiet enough to sneak behind your friend and chase them around. Used on Neptune flying wing.
Ed C.
Reviewed in the United States on April 26, 2022
These EDF's sound great!! The Xfly 64mm 4s EDF unit is a fine example. They're well made and efficient. They come balanced with a aluminum spinner and are ready to install. I will buy again and recommend.
Frank Messina
Reviewed in the United States on April 19, 2022
Great little EDF. Used in FreeWing MIG-15
Recommended Products