Your cart is empty.
Your cart is empty.Product Description
HARPUOU Motorcycle Headlight Housing with Fork Tube Bracket
Motorcycle headlight housing bucket with a large cutout on the back,wire management couldn't be easier. It allows you to connect anything you need inside the back of the headlight bucket without any extra drilling.
Headlight housing with 51mm to 54mm fork tube holder
Headlight housing comes with fork tube holder clamps, using clamps coming from each side of the bucket, Universal Bucket will fit on any bike with 51mm to 54mm fork tubes.
7in headlight bucket Package:
1 x Motorcycle Headlight Housing Bucket (Headlight Not Included)
1 pair Lamp Shell Fork Clamps Brackets
Wide compatibility
Motorcycle Headlight Housing Widely Applications:
1.LED Headlight Housing fits for most Motorbikes with 7 inch LED headlights
2.This head light housing bucket can upgrade your 5.75 inch headlights model to 7 inch headlight if you purchase 7 in LED headlight
3.other motorbike which fit this head light housing bucket.
Note:
Professionals install is Highly recommended!
Headlight is NOT include, the pictures with headlight are just for reference.
Please make sure this headlight housing fit your model before you purchase.
ronald pascua
Reviewed in the United States on January 1, 2025
I was missing 1 bracket piece therefore I was not able to use this product for what I intended.
Rafael
Reviewed in the United States on September 24, 2024
I hace a honda shadow and it works as expected, easy to install, looks great, fits perfect
Harold Baughman
Reviewed in the United States on June 21, 2024
Good value for money. Fit perfectly.
Josh
Reviewed in Canada on June 2, 2024
The product looked good for the first 3 seconds , until wind literally took the black powder coating off 🤦🏻♂️
Customer
Reviewed in the United States on May 10, 2024
Bucket looks good. Fact that they left the fork clamps out is a major inconvenience.
marc
Reviewed in the United States on December 18, 2024
The finish quality is not great, the instructions are worthless, screws feel really cheap, mounting/fitting isn't good either.The clearances for installing the headlight are entirely too tight, I had to take a grinder to the outside perimeter of my headlight just to get it to fit all the way inside the cover. Which is also a terrible design, the headlight should be mounted to the housing, and not the cover. The little tabs that lock the headlight to the cover dont fit the way they're supposed to. They're notched to go around the alignment tabs on the headlight, except only one will actually line up with the tab on the headlight and then it throws the headlight off center anyway.Need better dimensions listed so we know how wide the mounting brackets are, in order to know if it'll fit mounted to the fork tubes. My tubes are about 1/2" wider than the mounting tabs, so I had to order spacers in order to even mount it. And now, with the spacers, I cant even make use of the little alignment/adjustment screw that goes into the bucket.Getting the rubber to stay in place while trying to get the clamps on took quite a bit of work, I had to essentially install each clamp multiple times because the rubber kept falling as i was trying to get them on. This could be fixed if the rubber came with some sort of adhesive to attach it to the clamps before installing them.Trying to juggle everything while manhandling the clamps to get them bolted to the bracketsand the headlight bucket, while having them postioned correctly, was also a serious pain.The big hole in the back of the bucket could use a rubber grommet, at the very least, to help protect the wiring going through it. It'd be better if it was a grommet that could actually keep water out of the headlight bucket, since it's made to go on something that's open to the elements like a motorcycle is....It does looke kind of cool, but not cool enough to warrant all the hassle of installing it. Honestly... if I hadn't dropped pieces so many times while trying to install it, which left scratches in the finish, I would've returned it. But, since I scratched it I will keep it until it starts collecting water or i find a better option for my custom install.
Derek B.
Reviewed in the United States on January 7, 2024
I've been customizing a 1980 Suzuki gs850L and this bucket fits my led replacement headlamp perfect. All wiring inside the original bucket fit without crowding everything. Solid cast aluninum construction. Hangers are ok but could be better. The only negative i had was the bezel bolt holes were not drilled out. A 3/16 drill bit fixed that. Other than that this bucket is totally worth the price. I added a gold accent stripe to mine.
paul
Reviewed in the United States on July 17, 2023
The overall product is good quality. However, it didn’t come with instructions so kinda just had to figure that out but that wasnt really the issue for me. The issue for me is that it says it’s for a 7in light but definitely didn’t fit a 7in, I ended up having to grind down the inner lip in order for the actual light to fit
Alberto
Reviewed in Mexico on June 14, 2023
Se nota lo bien que está hecho (resalta la buena calidad del producto), se utilizó para una italika TC250 2023 con un faro daymaker de 7 pulgadas.Solo pongo un pero, me hubiera gustado que las abrazaderas tuvieron una medida para 62mm a 64mm, esto por el modelo de la moto (pero creo no existen en general estas medidas, solo he visto un máximo de 59mm)En general lo recomiendo totalmente.
RavynJL
Reviewed in the United States on May 18, 2023
I have tried another set prior to getting this one, which ran a bit small for my forks but it came with a headlight that I purchased - I did make it work but I wanted something that would look a lot more factory. Searched Amazon for a bit and came across this set which came in many different sizes and looked very simple. Fast forward a few month, it was installed and I have put about 1k miles on it so far. It looks great, easy to install, comes with rubber strips of 2 different sizes, there are a lot of them in the box so you could stack them if you had to thus if you are not sure about the size, just go 1 up. Its been holding my 7 inch headlight no problem, very nice powder coat finish on it as well. Do not think I will need one of those again but if I do, Ill be coming back for this one.
Recommended Products
$74.99
$ 32 .99 $32.99