Your cart is empty.
Your cart is empty.
Product Features:
Blackened oxide finish to resist corrosion
Bearing assisted force nut for ease and longevity of tool
Tool allows the bush to be fitted quickly and easily without causing damage while axle still on vehicle
For use on Audi A3; VW Golf IV; Bora 1.4/1.6/1.8/2.0 and 1.9D(2001~2003)
Recommended Instructions of use:
Step 1: Securely support the vehicle with jack stands or frame lift, then remove the rear wheels per factory manual
Step 2: Remove both front mounting bolts from the rear axle mounting bracket
Step 3: Pull the front end of the trailing arm down the mounting bracket and wedge into position, using a solid object between the arm end and the underside of the vehicle.
Step 4: Mark the exact position in the arm of the rubber mounting
Step 5: Remove the old mounting bush from the trailing arm
Step 6: Lubricate the screw threads of the tool
Step 7: Align the Y mark on the new bush with the mark on the axle trailing arm
Step 8: Assemble the bush suspension tool and insert the new bonded mounting into position, adapter is lipped and designed to sit flush against the trailing arm
Step 9: With a 24mm socket on ratchet slowly turn the thrust bearing to pull the new mounting into the rear axl
Step 10. Re-assemble and Repeat steps 3-9 for the other side
shane
Reviewed in Canada on February 17, 2025
Works great for changing mk4 Jetta rear beam bushings
Ben
Reviewed in the United States on August 18, 2024
Works OK but the bolt slowed some stress after using. I going to get some grade 8 bolts.
Jesu
Reviewed in Mexico on May 27, 2024
Excelente para bujes del jjetta
Es la pieza que necesitaba
Reviewed in Mexico on March 3, 2024
Me ahorro mucho tiempo y trabajo
Cliente de
Reviewed in Mexico on July 31, 2023
Funciona bien. Solo que si fuera el tornillo de mejor calidad . Duraría más tiempo. Posiblemente el tornillo se tenga que cambiar cada determinado tiempo
Nick Wortmann
Reviewed in the United States on April 13, 2022
This worked to install the bushings woth ease, especially after freezing them for awhile. However, this tool will not remove the bushings without an additional spacer/cup. The tool worked well for installing but the threaded rod ended up shearing its threads off. I have contacted the company with no response. Seems a bit sketchy
Customer
Reviewed in Canada on November 6, 2021
I used it for removing / installing axle bushings.it's not bad.
M G
Reviewed in the United States on April 5, 2020
I’m a technician in a shop got this in hopes of doing a job over the weekend. Poorly made failed after partial install of second bushing bent threaded rod and deformed it would not purchase again need to warranty or send my money back
Renee
Reviewed in the United States on August 20, 2019
Works great
Andy S.
Reviewed in the United States on May 15, 2018
This is exactly what you need to install new rear axle bushings for mk4(1999.5-2005) VW's. It's useless for removing old bushings, but it's not that difficult to do. I was able to wrench in a new set of bushings on my 2000 VW Golf faster than any homemade rig I've used in the past.
Little yummy
Reviewed in the United States on May 13, 2018
Perfect pricing and tool worked as it should.
Bryant Belliard
Reviewed in the United States on January 6, 2017
good tool work perfect.
Customer
Reviewed in the United States on April 19, 2017
Very smooth tool. Workes perfectly for my 01' Golf TDI. Go slow and make sure the bushings are going in straight as they're all composite bodied and will crack if forced in crooked. This works for OEM style rubber bushings.
Recommended Products
$149.00
$ 67 .99 $67.99
$119.99
$ 49 .99 $49.99