Your cart is empty.
Your cart is empty.Ever struggled to find a way to hang a narrow-headstock CBG on the wall? Now there's a safe and effective way!; Crafted from 1/4" Arctic birch plywood, this adjustable wall-hanger kit is designed to offer a comfortable place to hang your cigar box guitar. The dimensions are 3 1/4" wide x 5" tall x 3 1/8" deep. It mounts to the wall with screws through two holes (screws not included). The kit quickly and easily assembles with no tools or glue required (just screws and a screwdriver to mount it to a wall). ; Assembly how-to sheet with photos included to help you get it put together. ; The two support hook sides of this hanger can be cafefully adjusted up and down into cut notches, allowing it to adequately support various 1 1/2" wide headstock configurations - 2 left / 1 Right, 2 Right / 1 Left, 2L / 2R and more. You can also use this with extended headstock instruments, though if the guitar is too heavy it may bend the support hooks outward. This is really intended for lighter (4 pounds or less) cigar box guitars. ; PLEASE NOTE: Assembling this kit and adjusting the hanger hooks requires a gentle touch. Too much torque or force will break the plywood. If it is already mounted to the wall, we recommend removing it from the wall before adjusting the hanger hooks.; This is a laser-cut product. One side of the cut panels will have some darkening/staining left over from the cutting process. These spots should be sanded off if so desired.
Susan
Reviewed in the United States on June 8, 2023
Photo looks better than the actual product, but it does work.
Just Me
Reviewed in the United States on October 16, 2023
Thought it was metal, it’s wood but does the job
jon vick
Reviewed in the United States on December 17, 2020
Great hangers for CBGs, note they are not nor will they work with a guitar, great product love them!
Robert A. Grisak
Reviewed in the United States on June 17, 2019
Great
Dave R
Reviewed in the United States on February 10, 2019
Great for those cigarbox owners not knowing how to store or display their guitars.
Morky
Reviewed in the United States on June 7, 2018
A mixed review on these. First the good: They look good and are pretty easy to mount. They fit most cigar box guitars. The not-so-good: They are cut from fairly thin plywood, and while they look good, I was concerned during assembly that they could crack. Assembly is a bit of a challenge because all the wood pieces fit tight and you have to be careful not to push or bend them too much and scratch or crack the wood. Also, they do not work for all CBGs. If the neck and head are straight, these work. But I have a couple with curved heads and they don't work. The heads are wider than the necks and the tuning pegs are out too wide to fit into the holders.
Recommended Products
$16.99
$ 8 .99 $8.99