Your cart is empty.
Your cart is empty.For use with most popular 5 gal. containers with plastic pull out (Rieke) spout. Optional bung for use with 5 Gal. drums with 2" male opening. Also includes 3/4" pump length extender. Also includes 3/4" pump length extender. Complete with 4' vinyl hose with steel discharge spout. Works with engine oil, gear oil, kerosene, diesel, light fuel, oil based paint thinners like turpentine and other petroleum based media. Not recommended for use with water-based and other non-corrosive media.
jathan lee
Reviewed in the United States on August 31, 2024
This pail pump was exactly what I was needing to complete the task at work. Made filling gear boxes and seal pots very easy. Better than using a funnel and trying to not spill. Great pump for the price
Andrew Fellenz
Reviewed in the United States on October 28, 2024
I’ve bought about a half dozen of these pumps and am pleased with how well they work
Tom
Reviewed in Canada on August 9, 2023
This product is sturdy and has a metal pump body that positively delivers. The reike adapter works well. I recommend test fitting the adapter before snapping it onto the pump body to be sure it fits your container. The nozzle holder does not drain back into the pump body so you will need to wrap a shop rag under the pump head to catch any drips.
Randall Thomas
Reviewed in the United States on July 14, 2023
A good pump for working with thin fluids like gasoline. It's able to establish a prime while being vertical and pumps well.
Tell It Like It Is
Reviewed in the United States on March 13, 2018
I use this to transfer hydraulic fluid from the 5 gallon containers it comes in to the machines that need it. Since the hydraulic fluid we use costs about $11 per gallon, we don't really like spilling or wasting any. We use 2 different kinds of hydraulic fluid, one the conventional type and the other the type that uses common transmission and hydraulic fluid (JD).These pumps thread into the threaded hole built into the lid of the 5 gallon bucket. No leaks. Pump is very efficient. Pumps almost 1.5 gallons per minute. This is the best way we have found for hydraulic fluid transfer.
Mark H
Reviewed in the United States on January 5, 2018
Although it did not function exactly how I had thought it would, it turns out to be wonderful! I had thought it was for 5 gallon gas / diesel fuel cans, and it is actually for what I would call a 5 gallon pail. When I received it, none of the adaptors would work (obviously), but I did however have an center open cap I had purchased for something else. I tried it over the cap and it worked like a charm. Of course the metal spout at the end is for insertion into a differential, or valve cover and the like, but a little tugging (well actually a lot) and I was able to straighten it out enough to get it into the fuel spout on the tractor. I keep 3 5 gallon plastic cans on hand for the tractor, and swap this to whichever one I am using at the time. Place it on the hood of the tractor, pull up 4-5 times, and let it run. Watch the gauge and when it shows "full" push the plunger back down. That easy ! My original intention was to not have to hold the can while fueling, and of course to misjudge the amount and "wear" the overflow. This has worked tremendously well for what I needed it to do. Only criticism would be for Advance tool to offer the cap to convert it for a fuel can. Going to go on a limb and see how well it will handle gasoline on another purchase so more to follow I guess.
athscherer
Reviewed in the United States on April 19, 2017
Just the kind of pump I was looking for!PROS: Lift handle to pump, and it pumps AW32 light hydraulic oil (what I'm using the pump for) with VERY little effort. When filling containers with this pump, it is easy to control how much fluid is dispensed by limiting the upward stroke. Pushing the handle down to its normal position dispenses no fluid. The conical shaped bung adapter threads onto the lift up spout of the hydraulic oil pails that I use. This is great because it minimizes spillage. The pail pumps I have used in the past have a lid that fits over the pail with the original sealed pail lid removed, and any sloshing of the oil in the pail splashes over the rim and makes quite a mess. It was always a problem especially when the pail is full. With the original sealed pail lid still attached, this problem is eliminated. Although the spout connector is not a perfect fit, it threads on well enough to keep fluid from spilling out during sloshing.CONS: 1. Suction tube is not adjustable for different height pails. Usually the suction tube is telescoping so it can be extended before inserting into the pail and it adjusts automatically when inserted and threaded onto the spout. the suction tube is just a little too long for one type of oil pail that I use, and since the spout threads are not a perfect match, it barely secures to the spout. The spout is flexible however, so the pump winds up tilted to accommodate the suction tube length. 2. The metal spout holder on the top has a hole in the bottom that allows residual fluid in the tube to flow onto the top of the pail lid. I would think that this should feed back into the pail. I do understand that this could allow contamination into the pail, but the only time the spout is not inserted to prevent contamination is when dispensing the fluid, so I think that this would be a great design improvement and it is pretty poorly thought out as it is.Despite the two minor design flaws, overall this is a great product at a very reasonable price.
Bob. Gould
Reviewed in the United States on June 26, 2014
It had very minimal instructions (the second port to which the hose in the picture is connected is not identified or discussed at all). The one I got pumped backwards! Instead of the oil coming out of the discharge spout it came out of the unidentified second port (and also leaked out of a small pinhole somewhere under the pump head). If all you want to do it pump in a circle as shown in the picture and have fluid leak out of the pump head onto the pail into which it is connected, I suppose it would work, but that is not the intent, is it? The first pull on the plunger with the hose going from the discharge spout into the other container caused oil to squirt out of the unidentified port all over me. IT NEVER PUMPED OUT OF THE DISCHARGE PORT AT ALL!
Big Jim Swade
Reviewed in the United States on August 2, 2012
I purchased this pump for a 5 gallon pail of Red Line gear oil and I discovered that it is a little too tall for the plastic pail that my Red Line oil came in. It hits the bottom of pail before you can thread the top mount onto the spout on the pail. It comes with an adapter for taller 5 gallon pails, but it needs to be a little shorter for some 5 gallon plastic pails. I was able to use it by installing it an angle in the pail, but it really needs to be shorter. The pumping part works great and I was able to change my gear oil, but it just isn't quite correct fitting to the pail.
Recommended Products
$14.91
$ 7 .99 $7.99