Your cart is empty.
Your cart is empty. Specifications:
Part Number: AR340122(ARA340178) AR340065 & ARA340163
part Name: Servo Saver Hub Set
Material:Aluminum alloy 6061 T6
Compatible with :
FELONY:#ARA7617V2T1/#ARA7617V2T2
INFRACTION:#ARA7615V2T1/#ARA7615V2T2/#ARA109001
FIRETEAM:
KRATION:#ARA106053/#ARA8608V5T1/#ARA8608V5T2/#ARA106040T1/#ARA106040T2/#AR106029/#AR106031/#AR106015/#AR106018
LIMITLESS:#ARA109011
MOJAVE:#ARA7204/#ARA7604V2T1/#ARA7604V2T2/#ARA106058T1/#ARA106058T2
NOTORIOUS:#ARA8611V5T1/#ARA8611V5T2/#ARA106044T1/#ARA106044T2/#AR106034/#AR106036
OUTCAST:#ARA8710/#ARA106060/#ARA106042T1/#ARA106042T2/#AR106032/#AR106033/#AR106021/#AR106027
TALION:#ARA8707/#ARA106048/#AR106030/#AR106014
TYPHON:#ARA8306/#ARA8606V5/#ARA106046/#AR106028/#AR106013
Package List:
1* RC Car Servo Saver Hub Set
Jason Graves
Reviewed in the United States on February 18, 2025
For anyone who purchases one and the threads are loose I used a piece of cardboard and used pliers to compress the nut while off the tube. Now it is tight to turn by hand and locks down when you tighten the small retention screw. Also be very careful not to overtighten the tension screw it wont take much torque.
Customer
Reviewed in the United States on August 26, 2024
Stock arrma 6s servo save is too loose and gives no steering at speeds. This adds like twice the steering with stock servo
Bob
Reviewed in the United States on June 9, 2024
My Kraton 6s steering was soft. Full turn on the transmitter little turn of the tires. After replacing everything responds as it should. Went in nicely, worked with stock components. Works well. The color matches well. Good deal.
Matthew M.
Reviewed in the United States on October 3, 2024
While this the will allow you to set the pressure of the servo saver you won't be able to lock it in as the ring when fully tightened does not apply to the shaft and will still spin freely.
STEVE Land
Reviewed in the United Kingdom on October 10, 2024
Works a dream easy n to fit , a tip, be carefull not to overload your servo , as this can do that , I tested mine before use to confirm max current draw
TJ
Reviewed in the United States on August 13, 2023
Great improvement to the steering on my Kraton6S BLX😁
Tech Junkie
Reviewed in the United States on October 30, 2023
When I put the clamping nut on it screwed in fine but no matter how tight I made it there was no effect at all. Finally, I tightened it too much and stripped out the threads. The entire time I was tightening the clamping screw the adjustment ring remained very loose and thus unusable since I don't want to have to fix it again when it falls off. It's really loose, I doubt Locktite would hold it. There weren't many threads for the screw and they were not strong enough to provide any clamping at all. Maybe I got a dud.
George loncion
Reviewed in the United States on October 29, 2023
Prefect for the kratonv5
Seth
Reviewed in the United States on January 15, 2023
This is just what I needed for my Kraton 1/8 EXB. Before adding this, no matter what servo I put in there the bone stock non-adjustable servo saver did not allow for precise steering. Installation was tricky, but not terrible. One thing to note is this part does not come with the brass bushing for the top. You have to take it off of the stock pieces. Do not make the same mistake I did and put it all together only to realize it was missing.
Recommended Products
