Your cart is empty.
Your cart is empty.Product Description
Compatible with Chevy 350 (with Vortec Hurricane Plus)
- OEM Number: 52033
- Intake Material: Aluminum
- Intake Type: Single Plane
- Intake Port Dimensions: 2.06" x 1.18"
- Basic Operating RPM Range: 3000 - 7500+
- Fitment: Diect Replacement
Freak Jeep
Reviewed in the United States on August 1, 2024
Chinese junk! Installed the intake and it immediately leaks water from the water passage through a small pin hole in the casting.
Shawn
Reviewed in the United States on May 19, 2024
Price is phenomenal. Quality is a little hit or miss. Overall by a glance it looks great. However, intake ports where it meets the head are a bit oversized. By me getting bit once before on purchasing an similar knock-off lead me to immediately inspecting fitment. Placed gaskets on the intake as soon as it was delivered and found the water ports has an alignment issue. Not the greatest but not the worst. Not too much of an issue honestly. Back to the intake ports, being that they are a bit oversized, it is minute being that is only on one side of the port on all ports. May cause a little turbulence in the runners but if you are good with your hands, some messaging is required to get optimal performance. I verified that by placing intake on engine and using a borescope. Just my 2 cents for other persons budget building like myself. I would not recommend gasket matching with vortec heads imo (unless you have the experience in porting), more on the lines of using epoxy to fill in the intake manifold ports where it meets the head. Devcon or splash zone are some good inexpensive epoxies. Belzona 1111 would be the best but pricey and worth every penny. Needless to say, you get what you pay for.
Mrs.Usak89
Reviewed in Canada on October 9, 2024
Installed with proper gaskets in proper sequence and crack started opening up. As soon as bolts loosened the crack dissappeared again. Do not recommend. Just spent the $500 on an edelbrock.
Taylor mceuen
Reviewed in the United States on January 11, 2024
I purchased 2 of these and happy with them. Saved some money and have quality product and no name on them.
Dustin Leclerc
Reviewed in Canada on June 24, 2023
Worked great on my motor swap. Truck runs mint
Ed
Reviewed in the United States on June 11, 2023
Nice casting decent part ports are tall enough for the China vortec clone heads
Customer
Reviewed in Canada on December 31, 2023
Won't be testing untill spring. For now it looks BADASS.
John
Reviewed in Canada on October 8, 2023
Though not bolted down it has minor issues. Machined surfaces are smooth nut I did notice a possible issue with the runner to head angle. Also you may need to deepen the notch area at the rear to fit around the oil pressure sensor port.I assembled a carb on top and have only placed it on the engine to keep dirt and dust out. I will update ad I properly assemble engine with pictures.
Customer
Reviewed in the United States on November 23, 2022
You will have to get different size block off bolts and vacum hoses
Recommended Products