ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC), Very high Thermal Conductivity, Long Durability, Safe Application

Man, this stuff just keeps on going! I've used it on four different projects now, and I'm still barely halfway through the tub, not a single heat problem. Everything's running cool as a cucumber. Seriously, for the price, you get a ton of this stuff, and it actually works. No more worrying about overheating! Definitely worth grabbing if you're doing any kind of heatsink / CPU work. Oh, and I almost forgot – that little spatula they include? Super handy. It's perfect for scraping off the old thermal paste, and if you're careful, you can even use it to spread the new stuff. Makes the whole process way easier.

The paste was simple to apply to my new CPU and the included spatula made spreading the paste over the entire cover very easy. The tube holds plenty of paste so that I have enough left over for a couple more applications for other systems if needed. Recommend this product as it offers good quality for a fair price.

Absolutely no drama with this thermal paste. I used a small amount for an intel 9900K. I have looked in the bios for temps and its idling at at around 37c. Cheap but effective. Great stuff.

ARCTIC MX-4 Wärmeleitpaste – Top-Performance für CPU & GPU! ⭐⭐⭐⭐⭐Die ARCTIC MX-4 ist eine der besten Wärmeleitpasten, die ich bisher verwendet habe. Sie bietet eine sehr hohe Wärmeleitfähigkeit, was sich direkt in niedrigeren Temperaturen meiner CPU und GPU bemerkbar macht.✅ Einfache Anwendung – Die Paste hat eine perfekte Konsistenz, lässt sich mühelos auftragen und wird mit einem praktischen Spachtel geliefert.✅ Hohe Wärmeleitfähigkeit – Meine Temperaturen sind im Vergleich zur vorherigen Paste deutlich gesunken.✅ Sichere Nutzung – Da sie nicht leitend ist, besteht kein Risiko für Kurzschlüsse oder Schäden an der Hardware.✅ Lange Haltbarkeit – Hält jahrelang ohne auszutrocknen oder die Leistung zu verlieren.Ob für PC, Laptop oder Konsole (PS4, PS5), die MX-4 ist eine zuverlässige Wahl für jeden, der maximale Kühlung und Leistung will. Klare Kaufempfehlung! 🔥💻

The ARCTIC MX-4 thermal paste is a top-tier product for ensuring optimal performance of CPUs and GPUs. The included spatula makes application precise and hassle-free, and the 4g size is perfect for multiple uses. It spreads evenly and provides excellent thermal conductivity, keeping my system cool even under heavy loads. I noticed immediate improvements in temperature stability after applying it to my PC. Its non-conductive nature adds an extra layer of safety during installation. Packaging was great, keeping the product intact, and it arrived on time. Highly recommend this for anyone looking to enhance their system’s cooling efficiency!

I’m like an old dog with her favorite bone, I still believe the MX-4 is the best thermal paste on the market for the price when dealing with older powered cpus/gpus and overheating issues. I have been using MX-4 for about the past 10+ years. Both formula and performance has not changed throughout the years making it a reliable go-to thermal (knock-on-wood) to depend on. The syringe applicator makes it easy to control the amount & spread when using your fingers to cover the chip. If you don’t trust your fingers or don’t want to get them dirty, a small blue spatula (usually wedged into the bottom of the box) is included for your convenience. Should you make a mess and leak a little, there’s no need to stress since it’s metal free or non-conductive, non-capacitive and won’t cause a short circuit. The paste has a medium viscosity that’s not too thick or thin, but more like creamy peanut butter or nutella. It’s easy to apply and you’ll notice an almost immediate improvement in lower load temperatures and performance that will last for at least 7-8 years. You should be able to get 3-4 applications from the syringe. The stuff is also durable and has a long shelf life of best before date of Jan 2032, so it won’t degrade or go bad anytime soon. If you’re like me, you’ll need to buy another tube for the next time only because you lost/misplaced the open one. LOL! Overall, it does what it’s suppose to do and does it reasonably well. It’s cheap, readily available, has a loyal fan base due to its long lasting effectiveness & cooling performance, and price/performance ratio. German engineered. 5 Stars!

عملت سكان والمنتج طلع اصلي و انصح به

It's no Arctix whatever the fancy name brand stuff is, so it might not have the highest heat transfer potential, but i put it on my daily driver (a used lenovo thinkpad t480) that had crusty thermal paste and the fans were always on and putting out heat. It made it run cool again so that the fans only kick up when I'm doing heavy work! I might need to buy a new space heater now, because my laptop is running so cool 😂

Great quality. It's enough for a few CPU's.

Za te pieniądze nie znam lepszej

I am about a week on the other side of a recent system build. Meaning that the new system has been in service for about a week. Why did I label this an under-appreciated item? Because without it the CPU probably wouldn't have lasted a minute. Ok, the truth is that if one is building on a motherboard built this century, then the board itself is probably smart enough to shut things down before the CPU cooks. But if one has built a system in the past year, then one knows just how difficult it is to get the core components at present. So, yeah, cooking the CPU would have a more profound and less recoverable connotation.Enter, thermal paste. More specifically, enter one of the most recent formulations of thermal paste. I chose this one because it has significantly higher thermal transmission gradient than the best formulations available just a few years ago, and came in at half the price of its next competitor (at the time of purchase). In reality, they are all priced about the same, but many come with half the volume of stuff inside the tube. And suppose one makes a mistake the first time had needs a do-over (that didn't happen to me, but I prepared for it none the less). So, at about $9 for 4 ml; if this were gasoline it would cost over $170K to fill a 20 gal tank! The other guys were selling 2 ml for the same price so thankfully my car doesn't run on this stuff.But not using it can spend about $200 to $20,000 (Intel Xeon and AMD Epyc CPU builds can start touching this magnitude of cash) in less than a minute. So far, I have stressed my system during video rendering and compositing on a few occasions - it's ok, that's what it was built to do. The CPU is factory rated at 90 degrees C - that's almost hot enough to boil water, but that is the factory established LIMIT. Using this paste along with a liquid-cooled thermal management scheme, my CPU has never gone above 61C during any operation to date including the most stressful. The thermal paste is the transmitter between the CPU and the heatsink. So no cooling strategy will be any more efficient than the paste will allow.Another reason for purchasing a tube with extra paste; some builds use more than one CPU, and sometimes there's an options to provide additional cooling to the GPU. M.2 memory tends to run pretty warm and use heatsinks as well. The point being, anytime there's a heatsink, using thermal paste at the junction will enhance the heatsink's ability to cool the component - the better the paste, the more efficient the cooling. And cooler components run faster and smoother. Solid State memory slows down significantly at higher temperatures, it's called throttling for anyone looking at their first build. So I probably used less than 1 ml to install the CPU - it's more art than exact science, but having more left over is helpful if one has numerous heatsinks to treat during the build.This paste emerged from the tube in a predictable manner - which is good considering the cost per ounce. It came with a mini-spatula for spreading. It sort of resembles a pizza peel if one were providing their pet hamster with its own pizza oven, but I digress. Spreading the paste prior to installing the CPU cooler was very easy and controllable. I was able to achieve edge to edge over the CPU without any dripping to the motherboard - nice, neat, mess-free application. There's also a rating for noise level....ok....um...this paste is pretty quiet. (Amazon asks reviewers to rate a few areas that are not necessarily presented in the public review space other than as an aggregate score).My CPU was at 24C (room temperature) when I powered up this afternoon. It is now at 37C and hasn't gone above 43C during this session. That was probably during Windows boot up. It runs typically between 34C and 38C during low demand. I have read some reviews in which folks describe their systems as running nominally ay 70C! (Methinks these are gaming rigs under full load). So, I guess based on all of this, this paste is pretty effective. But it can only be as effective as the rest of the cooling system it supports. At least I can confidently say that it is not likely to be a weak link - and it has a rating for efficacy over 8 years! I would purchase it again - but I wouldn't fill the gas tank with it.