Your cart is empty.
Your cart is empty.The USB PDA/ Serial Adapter (UC232A) provides you with an external serial (DB- 9 male) Plug-n-Play connection for use with computers, notebooks, and hand held computing devices that support USB. The PDA/USB Serial Adapter has a standard type A USB plug. This USB PDA/Serial Adapter provides PDAs, digital cameras, modems, and ISDN terminal adapters with high quality serial connections at a data transfer rate of over 230Kbps. This makes the USB interface transparent to serial peripherals, allowing them to easily interface with USB computers. This eliminates the setup hassle found with traditional serial port connections. This device also supports energy saving suspend and resume operations. Package Content: 1 x UC 232A USB to serial adapter cable, 1 x Software CD, 1 x Warranty Card
Kunde
Reviewed in Germany on August 15, 2023
Da neue PCs keine RS232 Schnittstelle mehr haben, aber ich dringend noch so einen Anschluss benötigte, habe ich dieses Adapter bestellt. Wird von Win 11 sofort erkannt und funktioniert einwandfrei
Poppa Brock
Reviewed in the United States on December 23, 2023
This worked great, just like a true serial port. Quite satisfied
Afrinadian
Reviewed in Canada on January 24, 2023
Through this at a computer (Install Windows drivers of course) and it just works! Tested on Linux & Windows 7, Windows 10 & Windows 11
Justin Kuo
Reviewed in the United States on February 16, 2022
I use the Aten USB to serial adapters for everything from TImeMachines, to wind gauges, scoreboards and more. I purchased the three of the adapters from Amazon in September 2021 and they worked perfectly with my Windows 10 laptops. I purchased another 3 of the same items from Amazon in December and found they were incompatible with the same Windows 10 laptops. I checked the ATEN site and found "You might be using an old UC232A "chipset" version that is not compatible with Windows 8 and later OS." I was sold three older adapters.To check you have the current adapter, look for the serial number on the adapter. From Aten: "If the 3rd digit is less or equal to "9" (note letter such as A,B,C, etc... use new chipset), your unit has the older chip version. We recommend replacing your UC232A."The adapters I received had a number "6" as the third digit in the serial numbers. That meant my adapters were using the older, incompatible chipset.Another clue I received the older model adapter was the box included an installation CD. The new adapters do not include a CD.Hope this helps.
Alexandre
Reviewed in France on November 4, 2022
fonctionne très bien avec w11
Balaji
Reviewed in India on May 28, 2020
Good quality
maki3
Reviewed in Japan on December 17, 2017
仕事で使用のため購入しましたが、問題なく使用できています、もう少し長ければと思います。
Josh Lehan
Reviewed in the United States on May 13, 2015
Works great on Linux, "out of the box". It contains a Prolific PL2303 chip, just like almost all the others. Worked the first time. It's a standard RS-232 serial port, and works at 115200 baud (the maximum standard speed). I did not test any faster speeds.Haven't tested it on Windows or Mac.One caveat is that it requires the correct serial cable: either a "straight through" serial cable, or a "null modem" serial cable, depending on your device. These two wiring standards are incompatible, and it can't switch automatically, so it's up to you, to supply the correct cable! Buy one of each if you are unsure.The adapter is 9-pin male, so your serial cable must be 9-pin female (on at least one of its ends) otherwise you won't be able to plug it in. There's a helpful LED on the adapter that lights up when it's transmitting or receiving data.ATEN is better known as "Iogear" in the USA. Most of Iogear's products are simply relabeled ATEN products. Buy whatever's cheapest at the moment, either ATEN or Iogear, they are the same!Avoid buying a no-name serial converter, though, because there's counterfeit Prolific PL2303 chips out there that are unreliable or just don't work. Even though a USB serial converter is a generic product, stick to a name brand, like ATEN or Iogear, to avoid this.
Chris R.
Reviewed in the United States on November 14, 2014
I have an older serial Ross-Tech VAG-Com cable. With this adapter, I am able to plug my cable into my laptop or tablet and scan my car's OBD2 port. Works every time without any issues. This is the only thing I've used it for, but this alone makes it worth the cost to me.
W Widmer
Reviewed in the United States on January 3, 2014
Genuine ATEN item received in original packaging.This USB to serial adapter is listed to work with NexRemote. Snap to install under WinXP & works like a charm with Celestron NexRemote to control NexStar 8SE scope (Bought 2 / both fine). Included CD has drivers for Win XP, Vista, 7 & 8 as well as Mac, Intel Mac, & Linux. Items received have newer serial # & manual states will work with Win7 & 8, though not tested with either.Item shipped quickly & was well packaged. Although Tekonic is newly launched, since they are a fulfilled by Amazon seller I had little concern.
Jonathan Williams
Reviewed in the United States on April 22, 2014
I have used other brands in the past with install issues or glitches with normal operations, but this adapter worked perfectly no glitches in install or performance.FYI (some of the install folders and files on the install disc are not named exactly as they appear in the manual, but if you know your operating system you should have no problems)
C. Peterson
Reviewed in the United States on January 4, 2013
This is the 4th of the ATEN adapters that I have bought. The others are all still in service and working well. As I have new needs develop for this type of adapter I keep going back to the ATEN product. I have three different laptops that I control my telescope with plus I use one to attach to my weather station, all use the ATEN adapter and I'm very satisfied. I have no hesitation in recommending them to others. Great product.
DB Cooper
Reviewed in the United States on November 14, 2011
the product arrived fast in good condition. The software disc with the drivers could be laid out a bit better, but some common sense and you can find the correct driver you need. Installation was quick. I had to reassign the COM port the adapter was setup on, but after that this adapter worked perfectly.I am very please with this purchase.
Recommended Products
$32.99
$ 16 .99 $16.99