Your cart is empty.
Your cart is empty.AUTOSAVER88 Headlight Assembly Compatible with 97-03 Ford F-150/97-02 Ford Expedition Pickup Headlamp Replacement Chrome Housing Clear Lens
Cullen
Reviewed in the United States on March 10, 2025
They look great! Fit perfect. Easy to swap out.
Patrick
Reviewed in the United States on March 10, 2025
These lights have been installed for approximately 4 months. Didn't get much rain while driving until recently. Now the driver side has accumulated water and a lot of moisture. So far, the passenger side has been okay. Of course, now it is past Amazons 30 day return policy, and I sent an email to their customer service warranty and did not hear anything back from them. Do not waste your money on this product, you will have to buy a new one from someone else and reinstall it.
John Rushing
Reviewed in the United States on February 25, 2025
This is the second pair of these I have bought, for different trucks. I've noticed some said they fit to tight and we're hard to install. This is what you want, a loose fitting light housing would vibrate and make oncoming traffic think you have flashers on lol. They line up perfect but you have to take your time and make sure you have the pins lined up before pushing them in. Do not force them until you know they are lined up or you risk damaging the housing, same is true for OEM headlights. Just remember you're buying a set of after market headlights that cost more than $200 less than a set of factory OEM headlights, so don't expect OEM quality. I'm sure these will start to yellow and fade in a few years but for this price I'll just replace them when they do, still a lot cheaper than OEM amd the light is just as bright. I would definitely recommend them. If yiu have never worked on a vehicle or installed headlights look your model up on YouTube and watch a video before starting, it might save you a lot of headaches and lost wrenches when you throw them lol.
SugarShane
Reviewed in Canada on February 23, 2025
I was hoping this product was as good as advertised hoping it would modernize my 2004 F150. But within 2 weeks both headlight casings were all fogged up with water drips inside them both. It was time consuming to install and I don’t want to remove them again but I will and replace with a proper non leaking product.
Daniel S
Reviewed in the United States on September 9, 2024
Led and sequential looked amazing. Unfortunately this was only a 4-Star review is because the headlight housing was poorly sealed on the right headlight and I was forced to return it. I would highly recommend doing your own headlight housing sealing on top of theirs. Besides that the product was outstanding and I would definitely buy again.
Customer
Reviewed in the United States on December 24, 2024
Pictures show unwired wires but it comes fully plug and play, no splicing required. Looks amazing. I had a problem with one of the LED strips not working but simply flipped the input plug that connects to the blinker upside down and plugged it in and it works perfectly. The black looks a lot better in person than it does in the pictures.
Don Michael Corbin
Reviewed in the United States on December 13, 2024
I've had them 3 weeks. So far, so good. They look to be well made and have worked flawlessly. The LED strips are nice and bright. I took the precaution of applying a thin layer of clear silicone around the outside of the housing where the two halves meet to prevent any moisture from getting inside. I would recommend these lights.
Chaise Hennings
Reviewed in Canada on May 15, 2023
I installed them was super stoked to find the passenger leds didn't work at all. Tried them on both sides to trouble shoot (photos included) and the light is just faulty. You'd expect your product to work for the price you are charging. Returning immediately
Lele
Reviewed in Canada on July 17, 2022
Great product.Easy to install . Would recommend to anyone.
Skullywag
Reviewed in the United States on March 28, 2022
The best thing about these headlights is the PRICE. Other than that...these are pretty much inferior in EVERY WAY vs the much more expensive OEM ones.Routed holes for turn signals are too big...you'll need to wrap bulb plug with electrical tape or something to ad girth...and then you'll need some caulk around the plug to get it to seal permanently.The whole back side of the light will need to be sealed. I used a spray can of clear Flex Seal. Spray around all bulb plugs after installing them, and all seams in plastic. It can be done without getting any on the front lens and won't be noticeable from the outside of truck. Failure to do so will allow condensation in the lamp that will take weeks to dry, and you might blow a bulb or two from getting it's socket wet.This is my SECOND set of these cheap replacements. It was with the FIRST set, I learned all the above...and it was a hassle. I intentionally bought them AGAIN as a cheap way to spruce up the looks of my truck before selling, and didn't want to spend $$$ to get it ready. (the first set only lasted 2 years before looking cruddy).If it's all you can afford...go for it. They LOOK great when new. But be prepared to do above work first if you want them to perform decently.If you can afford OEM, or plan on keeping your vehicle for a while... buy OEM instead...you'll have no prep work to get them to seal, and they will last 2x-3x longer before getting hazy. You get what you pay for.
Ryder
Reviewed in Canada on January 18, 2022
Got these headlights last year and they have held up to the -50 Canadian weather. And a un beatable price.
Paul D.
Reviewed in Canada on February 9, 2021
Lights are great. Fit good and are nice and bright.
Joseph Dougherty
Reviewed in the United States on April 7, 2019
Headlamp assemblies can be an expensive replacement. The reasonable price of this pair of replacements gave me concern about quality, but my concerns were unfounded. These are a great replacement, with excellent quality at a reasonable price.I replaced these in combination with new LED bulbs. The first thing I noticed about these was the excellent packing; each assembly was sealed in its own fitted box, with a cellophane protectant on the outer plastic and paper seals covereing the access ports for the bulbs. The removal and installation process was simple; remove three bolts holding the old housings and pop them out. The new assemblies were literally a perfect fit going in after installing the bulbs n the ports. All parts lined up as expected. The trimming of the ports was also very high quality, with no softness or give. The new assemblies popped right into place and lined up with the mounting bolts exactly right.Modern headlights don't often last very long; most car owners experience the yellowing and fogging of modern headlight plastic. Most people will try to restore them with cleaning and restoration kits of varying quality, and some have them "fixed" professionally. The alternative is replacement, which is likely the only option after multiple atempts at restoration.To prevent these from fading and yellowing in this brutal Florida sun, my next step will be to find a quality protectant to keep the plastic looking good.
Recommended Products
