Your cart is empty.
Your cart is empty.BEAMTECH 9005 fog light, only install in fog light position. the function of our bulb is:On off-road roads, fog lights can provide better lighting effects in foggy or rainy days our bulb
MiKE
Reviewed in Canada on April 5, 2023
These work well and are easy to installThe LED lights I received don't seem to seal as tight as the factory lights but work ok, I just check them periodically on my ATV to ensure they are still tightInstalled on a 2022 Cam-Am Outlander XMR 850
GARY
Reviewed in the United States on February 21, 2020
I ordered these lights online and the package quickly arrived as promised and in a safe protective box with a pair of gloves for you to wear so to protect the lights when fitting them.These lights are excellent quality and are extremely bright 100 times brighter than my original lights absolutely outstanding very nice white light and are so easy to fit. They are exactly the same size as the original bulbs so there’s nothing to do just unplug the original lights and fit the new ones which only takes a minute.Driving at night with these new lights is fantastic the night turns into day I can now see so far down the road and feel so safe driving at night especially when driving on a rainy night these lights are beyond belief so fantastic.I highly recommend Beam tech and their products their quality and service is excellent and they are very nice people very helpful every step of the way from online order to delivery truly amazing.Regards,Gary
Raul L.
Reviewed in the United States on December 26, 2020
I purchased these light bulbs for my mom's car which is a 2008 Lexus RX350 to replace the yellowish color the original DRL bulbs emit. According to the seller on Amazon's page the lights are PLUG N PLAY and with the CHIP conversion, so you are suppose to get the lights, remove the old ones, install the new ones, and be done, well, not that easy.Lexus and some other cars ONLY send 6v power to the DRL bulbs, so these LEDs WILL NOT WORK for your DRL (driving lights), but there is a solution to make them work.Now, when you use the DRL bulbs in conjunction with the high beams, then the DRL bulb will get 12v from the computer, so these LEDs will turn on and work, but you don't want high beams ON all the time so you can use the DRL bulbs also, so what's the solution?After many, many hours researching, and weeks installing other products like decoder boxes and 9005 wires with 50w6ohm resistors that did not work, I was about to give up and return the DRL bulbs to the seller, because the bulbs were NOT Plug N Play as specified on the page. Well, I found a website that sells a WORKING DECODER, and let me tell you, it is the ONLY one that worked.If you purchase these light bulbs and they DO NOT work when you are running DRL bulbs only, then you need a decoder from ijdmtoy. The one I needed based on the year/make/model was the R1 decoder. Depending on your vehicle, you might need R2, R3, R4, R7 or R8 decoder, once you access their site, you will find out which one you need under the compatibility button.I have knowledge when it comes to LED lights and voltage, but let me tell you, this one almost make me lose my hair, haha. I don't want other people to go through the same issue like it happened to me, cause it is very time consuming and frustrating, so I decided to write a review to help others. The light bulbs are BRIGHT running as DRL, and when you select high beams, they are extremely bright, so if the road is VERY dark, you'll see it without a problem. Remember, the lights might not be the issue, it could be your car and the voltage the computer sends to run the DRL bulbs.I forgot to mention, I did contact Beamtech numerous times to let them know the issue I was having with the lights not working in DRL mode, and their customer service is SUPERB. They do take their time to reply, and they do so quick, within a day. Because of their great customer service, I have decided to purchase the H11 light bulbs for my mom's car too.Thanks Beamtech
Customer
Reviewed in Canada on November 25, 2020
I like the heat sync on these vs fan but I noticed the adjuster to rotate the led which is also the part that mounts it into the headlamp doesn't fit tight to the bulb so when driving over rough road such as gravel or bumps my light pattern bounces poor design and after I turn the lights on for about a minute they will have a bright flash other than that they seem like good bulbs so far.
IonS
Reviewed in Canada on November 19, 2020
Package arrived quickly and I have easily installed 9005 bulb model on my 2012 Toyota Camry LE . At first installation light was flickering in DRL mode. I contacted Beamtech support by email from amazon and they sent me canbus driver modules. Once installed those adapters light stopped to flicker.FYI after you install canbus drivers and start the car the lights shining at full power. Wait a couple of minutes and they will dimm nicely.Overall great bulbs. Will by another pair for second car.Thank you beamtech!
Robert Zanatta
Reviewed in Canada on November 14, 2020
2016 Honda CR-V. Brightness similar to stock bulbs, just much whiter. Very easy to install, but does not fit tightly which is a little worrisome.
Cameron
Reviewed in Canada on October 6, 2020
I'll probably never have them on because they are so bright that I 'd probably blind someone. Very easy to install on my 93 Honda Accord, easier than the low beams that I installed as I had to move the battery out to install those. Beamtech is in the U.S. and the shipping came before the actual shipping date. Very easy to track the package and they arrived well boxed and no damage. Installation was great. Though after I had one working and I installed the other it didn't work for some reason. I switched the one that worked to the other and it came on fine. So I switched back and then it worked for some reason. Maybe just dust or I hadn't pushed it in all the way, I dunno. I would highly recommend these lights but the price point in Canadian $ was a bit more than the low beams. I'm looking forward to winter driving in the rural areas of where I live as these will give me way better vision and I'll feel much safer when I'm out driving on contry roads. Oh, and the bonus of these was the fact that the "peripheral" vision on the side of the roads is 100% better so I can see the edges of the road. I would HIGHLY recommend Beamtechs if you have concerns about safety for you and your family when driving out into the dark roads like the country. Caution though, you'll really blind someone with these so be aware of oncoming traffic and turn them off when you see a vehicle in the distance coming the other way.
Ted Larsen Jr
Reviewed in the United States on June 21, 2019
Wh when I first turn them on I wasn't sure exactly how bright they were, and as I was driving down a city street I couldn't tell if they were on or not because the light is so natural and clean. it wasn't until I turned onto a very dark road that I noticed exactly how bright they actually were. Stop lights for more than a half-mile away we're bright as if they were right next to me. I had a little bit of an issue with the light not registering in my car and low headlight warning was on. With contacting the company they instantly resolved my issue and offered me decoder boxes for both headlights and the replacement fog lights. This solved my issue and in my opinion their customer service is far above many others. The price of these headlights are way cheaper than they're worth! Do not hesitate with purchasing these lights. they are plug and play with the exact beam pattern of factory lighting. No need to adjust the headlights at all. I am super happy with the quality and feel of them as well.** I reserve the right to update at any time this review if I need to, and I paid full price to purchase this product so there is nothing requiring me to review in anyway this review is purely my own pure opinion on the product I purchased and recieved **PS if you found this review helpful please remember to give it a "thumbs up" so others are able to see just how helpful this review may be if they too rely on the experience of others, thank you! :)
OutlierForLife
Reviewed in the United States on August 17, 2017
Love how bright these, I am using these in my 2011 Nissan Rogue, the 9005's are now installed as my high beams and they make the sylvania xenon bulbs I have in my low beams look yellow in comparison. These are easily 3x brighter that my old bulbs. Just ordered a pair of H11's for my low beams, can't have them mismatching like that, and can't wait for the increased level of brightness.Only issue (and why it's only getting 4 stars instead of 5) is that they do not fit snugly in the headlight assembly, quite loose actually, they would even fall out if nothing is done. The legs that hold the bulbs in place are oriented correctly in terms of placement, but they are not as thick as stock or even other replacement bulbs (probably so the same setup can be used for a few applications). So I had to go purchase a set of O-Rings. For anybody else with the same issue you need a pair #14 (15/16" x 3/4" x 3/32") O-Rings. Get them at any hardware store for 2 bucks / pack. Just slide them over the existing ring so it rests on the base, perfect fit!My low beams / high beams used to switch off when one or the other is on, but now my low beams stay lit when I switch on the brights, not a real issue, especially since I will be upgrading the low beams to match. But that would wear out normal bulbs even faster. These are definitely worth the price!
Recommended Products
