Your cart is empty.
Your cart is empty.Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Tony Quance
Reviewed in Canada on September 1, 2024
DO NOT ORDER THIS O RING if you need the throttle body gasket for a BMW 3.0 DISA valve. It is too large, and entirely the wrong shape. If you have an original BMW valve, the reddish sealing ring is glued or melted in place, and not serviced separately by BMW. It will have to be prised out with sharp pointed tools and removed in its entirety. Fortunately, it is serviced by the aftermarket, but only as part of a kit with other parts that might not be needed. Judging by its size, it is more likely a replacement for the BMW pcv valve.
AGB
Reviewed in the United States on February 25, 2024
Good price and quality.
Levy Harris
Reviewed in the United States on October 28, 2024
Fits perfectly especially due to supplier being the oem, easy installation and very fast shipping. Will buy from this seller again.
Prince Dillon
Reviewed in the United States on June 25, 2023
Perfect fit!
Cam Hulsey
Reviewed in the United States on May 26, 2023
fit the throttle body perfectly
Scott
Reviewed in the United States on October 31, 2023
Good quality. Fit my 2000 328ci perfect
J
Reviewed in the United States on October 15, 2023
Vehicle: 2002 BMW X5 3.0i M54B30 AWD A/TIt works perfectly and feels substantial. BMW motors run so hot it is standard practice to replace rubbers under the hood. Quite satisfied with this replacement part.
Alonzo Butts
Reviewed in the United States on June 29, 2022
Didn't fit
gary
Reviewed in Canada on January 10, 2021
Prefect fit
FIDEL CONTRERAS LOPEZ
Reviewed in Mexico on February 29, 2020
igual que original o mejor, quedo perfecto en el cuerpo de aceleración, sin problemas y fácil de instalar.
Jasmin
Reviewed in Canada on August 26, 2019
A bit snug to get in the slot but had now worry about it falling out during install. Looked exactly like factory and car runs great - throttle body to intake so pretty critical to get a good seal.
LR02
Reviewed in Canada on May 29, 2017
The quality of the gasket is good and one that you should consider replacing when you work on you replace your pcv valve.
Roy Kornmeyer
Reviewed in the United States on November 3, 2015
THIS WAS EVIDENTLY A UNIVERSAL KIT MADE TO FIT SEVERAL MODELS AND YEARS. QUALITY WAS ACCEPTABLE. HOSES AND CONNECTORS SEEMED A LITTLE LESS ROBUST AS THE ORIGINALS. PCV/OILSEPARATOR SEEMED EQUAL IN CONSTRUCTION TO ORIGINAL. EVERYTHING FIT ALTHOUGH A COUPLE OF THE HOSES DIDN,T SEEM TO HAVE THE PROPER ANGLE ON THE CONNECTORS, BUT WITH A LITTLE PATIENCE IT ALL WENT TOGETHER AND FUNCTIONS PROPERLY. THE KIT SHOULD HAVE ALSO INCLUDED A COUPLE OF FEET OF 1/4 INCH VACUUM HOSE BUT THAT WAS JUST A QUICK TRIP TO THE PARTS STORE. IT WAS A ABOUT A 4 TO 5 HOUR JOB IF NO BREAKS WERE TAKEN. THE MOST DIFFICULT TASK WAS THE HOSE THAT SNAKED THROUGH THE INTAKE TO THE PVC. TAKE A REAL GOOD LOOK AT THE CONNECTION AND TRY TO FIGURE OUT THE BEST WAY TO DO IT. WORKING IT THROUGH THE INTAKE MANIFOLD AND ATTACHING TO THE PVC BEFORE SCREWING THE PVC DOWN SEEMED TO OFFER A LITTLE MORE WIGGLE ROOM TO GET IT HOOKED UP. NEXT TIME WILL BE EASIER, GOOD LUCK!!!
Recommended Products
