Your cart is empty.
Your cart is empty.The BedRug XLT Mat is designed specifically for trucks that have an existing spray-in liner or no bed liner. The all-new design has an integrated tailgate gap guard hinge that connects the bed piece to the tailgate piece. The polypropylene top layer construction offers a flat work surface, that is slip and skid resistant. The ¾” padded layer provides dent and impact resistance while offering a cushion for your knees while crawling around in your truck bed. The XLT Mat install in minutes using hook and loop fasteners to install without the need to prep, sand or drill holes into your truck bed.
Jeffrey Bushey
Reviewed in the United States on December 7, 2024
Fit Great and easy to install.
ggreen
Reviewed in the United States on December 28, 2024
Can't imagine my truck bed without a cover and the bedrug! Transforms the hard, metal floor into a soft, plush area like a car trunk.
Shannon Hackett
Reviewed in the United States on November 12, 2024
This is exactly what we wanted, and it's a perfect fit. Great value for the money.
Olivier Boudreau
Reviewed in Canada on February 19, 2023
Very strong and durable. Got it for my 3 dogs comfort in the back of my truck. Excellent quality. Installed in 5 minutes by myself
Greg
Reviewed in the United States on August 22, 2022
Very easy to install. Hard part was getting my truck bed clean. You do need to lay it out for a day. It comes rolled up. It’s been in my truck now for about 3 weeks. Couldn’t be happier with it. Got 3 loads of dirt in it last week. When I was done, I vacuumed it then rinsed it. Supper easy, and it’s as good as new. Highly recommend this product.
John B.
Reviewed in the United States on February 17, 2021
The carpet looks great in the bed and gives enough pad to be comfortable working in the bed as well as dampening any impact to items you might be carrying. The Rhino liner I had is tough on your knees. This makes it much nicer. Sturdy carpet and easy to install. I did add a little extra velcro tape a some areas around the cover as well as the tailgate. May not be necessary but I thought it would hold better. Overall a great product and good price
WinterIsCold
Reviewed in the United States on December 10, 2021
Short summary:*Good solid protection, may require trimming based on setup.Full review:I just finished installing this today in my 2021 f150 XLT which has the official Ford drop-in plastic liner installed but nothing protecting the tailgate because it has the tailgate step option. For anyone with the plastic liner, please read this.Let's start with the good:-Protects truck and tailgate, especially if you got the tailgate step option which in the 2021 model means work surface and lots of unprotected painted area around it that will get dented and scratched without something like this.-Provides a substantially more comfortable area to kneel on or stand on vs the plastic liner.-Much easier to slide things in and out since the gap between the tailgate and the bed is now covered and before would be a "snag" point for most items with the gap.Let's talk about the not-so-good:-Expensive. This is cheap industrial foam with carpet on the top. It should not be anywhere near this price.-Required me to do a good amount of trimming (3-4 inches) on all 4 corners of the bed carpet. It looks like it is designed for the previous 2015-2020 beds and they did not realize the 2021 beds are slightly different but the same length. No trimming needed length wise, just width wise.-The sticky tape for the velcro was fine for the tailgate adhesion, but would not stick to the bedliner. I did clean it properly and use alcohol, it was warm enough, and there has never been any kind of coating or wax or products applied to this bedliner that would hurt adhesion. The plastic drop-in liner from ford has raised ridges that are too thin (compared to the width of the tape), so only a small amount of the velcro tape can even grab on to it. I will likely have to get replacement tape at half the width of what they sent to fix this.
Customer
Reviewed in the United States on August 23, 2020
Perfect and super easy to install. Suggest laying out in sun to soften material so it’s easier to work with. Super easy install. You won’t be sorry! Very soft, fills ridges and makes crawling around in the bed very comfortable. Fibers like a rough carpet so it’s durable
BFZHAO
Reviewed in Canada on February 9, 2020
It's a little smaller than the bed but it doesn't matter.I installed it when it was -10 degree. It is the Vecro only. If it didn't work because of the low temperature, go buy more Vecro in the summer and re-install it.
Whispers
Reviewed in Canada on November 16, 2020
installs in minutes
Nobody
Reviewed in Canada on June 19, 2019
Great fit, does the job.Only complaint was I ordered in November and it came with a warning to install only above 20C. Had to call in a favour to get access to a warm garage.
Obie1Kanobe
Reviewed in the United States on March 11, 2019
The product is good and contrary to the 1 star reviews, it is carpet-like. The surface is softer than most indoor/outdoor carpets and has a lot more "give" to it--so it's easy on the knees.However, the installation instructions and videos are terrible! The written ones don't have any tips on positioning the carpet. The video on the product's page on the Bedrug website is for a different product. I watched several YouTube videos and they had conflicting instructions and didn't address the key issues.1. Make sure the XLT Mat is pushed completely to the bulkhead (that's obvious)• Make sure the mat touches the backside of the wheel wells. (The cut isn't very accurate so it may only touch for an inch or two.)• The above are important to prevent excess material in the tailgate hinge when closing.2. Before permanently fastening, place a heavy object on the Mat and pull the mat tight over the tailgate - Make sure the mat evenly reaches the line between the paint and the plastic cap. (A tiny bit past is OK if it fits everywhere else. The mat doesn't cover the plastic cap--per one video that has you put adhesion enhancer on the plastic. - The Mat should be fairly taut across the tailgate hinge area. - Make sure the Mat is EXACTLY centered between the left and right cutouts for the tailgate latches! (If not, the material will get caught in the latch and prevent the tailgate from closing. This will also damage the bed rug in that area.) I thought it was due to bunching of material in the hinge.Remove the velcro in the bed as described in the instructions.When you're ready to velcro the tailgate, it takes two people; one on each side.3. Test fit again following the steps in #2 above.4. Peel the tape off the velcro next to the hinge.Press down while making sure the mat is tight across the hinge and centered between the latch cutouts5. Peel the tape off the last row of velcro while making sure the mat is tight across the hinge and centered between the latch cutouts.6. Slowly and gently close the tailgate, stopping if you encounter any resistance.If you do, let the velcro cure to the paint as long as possible, then gently unhook the velcro and reposition.
Jammer
Reviewed in Canada on December 12, 2018
Nice fit and colour. Easy to install, looks great. mines under a tonneau, so I’m not sure if I’d just have it out exposed to the elements, but apparently it can be done. I’m not using my truck for hauling anymore, so it’s nice to have a clean smooth surface for the daily things. Very easy to install yourself.
Recommended Products
