Your cart is empty.
Your cart is empty.
BETAFPV 4pcs 1103 11000KV Brushless Motor FPV RC Brushless Motors for 1S 2S Lipo Battery Betafpv 2S Frame Racing Drone Only
Specification:
Item: BETAFPV 1103 11000KV Motor
KV (rpm/V): 11000KV
Shaft diameter:1.5mm
Axis length：6.4mm
Motor mount holes:8.5mm
Size of motors: 13.5mm*13.5mm*16mm
Weight: 3.25g/ 1pc, 13g/ 4pcs
Voltage: 7.4V
Load Current: 1.8-3.8A
Pull: 23-40g
Power: 6.7-28W
Efficient: 3.4-1.4g/W
Recommend Parts:
Battery:www.amazon.com/dp/B07JG3ZFC5
Propeller: www.amazon.com/dp/B07H9B2GJH
Application: Betafpv 2S brushless drone Only (Not for the other 80-110 racing drone)
Note:
Please kindly read the following before built a drone and keep careful when you weld:
This motor is only for Betafpv 2S FPV frame, Not for the other 80-110mm frame.
If working with over-sized propeller or overload voltage input, it may cause the motor overload and out of control.
If the motor aspirate the foreign things (especially metal things as this motor has strong magnetism, it's easy to aspirate the metal things), which may cause the motor stuck and burnt out.
If the motor shell deformation also could cause the motor stuck and burnt out.
If the motor is not compatible with the other parts of the drone, like the ESC, which may cause the motor out of control and burnt out.
Package listing :
4 * BETAFPV 1103 11000KV Brushless Motors
16 * Screw
Clifford S. Cooper
Reviewed in the United States on March 4, 2025
these are 4 bolt motor design but are m1.7 which makes these useless unless you are using betafpv frames. It also took me 2 tries to get these motors as the first one disappeared coming to me and took over 2 weeks to get. Disappointing because every frame out there that needs to use 1103s i know of are m2 motor mount with 4 holes.
Michael Lippert
Reviewed in Germany on January 11, 2025
Hervorragender Ersatz für den Whoop. Sie laufen perfekt und lassen sich ohne Probleme installieren.
Anonyme
Reviewed in France on November 10, 2024
Rien à dire, les 4 moteurs fonctionnent encore très bien, donc c'est parfait pour moi.
Nathan
Reviewed in the United States on July 14, 2023
These motor have yet to let me down. This is my 8th set on 8 different qauds. I have even had them on heavier qauds but will say they are put to work on a heavy qaud. I would recommend these to anyone.
Rob
Reviewed in the United States on June 27, 2023
Very satisfied with purchase. Purchased two sets of these because one of the motors in the first set broke from minimal handling. I may have not paid attention and been too rough, but the ESC wires could be manufactured better. I recommend these to beginner builders for price and performance.
Guglielmo N
Reviewed in Italy on March 12, 2023
Leggeri e potenti, ma non hanno l'aria molto resistente. Montati su un Cetus X 95 mm, il futuro ce lo dirà :-)
Ash
Reviewed in the United States on September 12, 2021
These motors are great motors, I just had a problem due to the connector cables are only an inch long so I had to rethink my build, but I had accommodating frames waiting to be used anyhow so it still worked out well.
Gonzalo
Reviewed in Spain on August 20, 2021
Me encantan estos motores para construir mi dron buena potencia y autonomía.
deesmithy
Reviewed in the United Kingdom on June 25, 2019
These motors are so smooth and a great upgrade for my 75x, used in comjunction with a turtle and i now have a HD whoop!!
Scott J. Morledge-Hampton
Reviewed in the United States on January 25, 2019
I bought 2 packs of these motors for a mini octocopter. Before I even tested the motors, it was clear that something was up with them. they didn't spin like normal motors, and they felt gritty, as if there was some debris between the magnets and the coils. I shook them, and nothing rattled, so I figure it must be poor, uneven coiling of the copper wire. Occasionaly, I could achieve smooth spinning on the affected motors for 2 or 3 spins before the problems would resume, but I was unable to clear any of the obstructions. When I hooked the motors up to power, the 2 motors that were gritty immediately started smoking, so I assumed they were dead. I tried once more, and they sputtered before shutting themselves off. Now every time I attach them to power they do the same thing. The other 6 motors work nominally.
ZPFunk
Reviewed in the United States on January 14, 2019
Yes! These little things are great so far, Im putting them through their paces on my HD whoop build.The original 0802 motors I had been using from another company were getting frighteningly hot because of the extra weight of my build, so I purchased these, and the Beta75x frame and now Im getting 2:30 - 3:00 flight time on my HD Whoop build with my current tune, and no signs of hot motors.I recommend them if youre building a cinewhoop or 2s whoop.
Victor Gabriel
Reviewed in the United States on September 15, 2018
Really love how this motors looks: The magnets are really good and the silicone wire is a nice touch. The connector will made the things easier for those who not like to solder. Till now, my FC has not arrive, so I did test the motors with a 6a ESC and a 2s 300 mah. These motors have a tons of power. I can't wait to test it in the air.As always, happy flying!
Larry Strunk
Reviewed in the United States on October 30, 2018
I did verify all the motors worked when they arrived, just in case.They all worked well and no issues on wires or connectors.It's nice to have spares, in case I break a motor in a crash.
Recommended Products
