Shopping Cart

Your cart is empty.

Your cart is empty.

BOW Products 36” XT XTENDER Fence - T-Track Table Saw Fence System with Multiple T-Slots for Woodworking Accessories - Fits Portable Table Saws, Cabinet Saws, and Band Saws - XT536 (Fence Only)

4.3 (8) Write Review
Free shipping on orders over $29.99

$139.99

$ 54 .99 $54.99

In Stock
  • Most Versatile Add-On Fence: XT XTENDER 36” Fence stands 5” tall, includes three T-slots along the top for feed control accessories, milled clamp attach slots for multi-position set up, special slot to add BOW Feed Supports accessory, and a slot for attaching to Delta UniFence and Harvey fences. Robust Aluminum extrusion with anodized finish and 3 sizes for all your needs. Use with XT Feed Supports to extend smaller tabletops and improve stability, cut quality, feed control and safety.
  • Extend Fence and Table Surface: XT XTENDER Fence works in tandem with optional XT Feed Support Accessory. Bow Feed Supports attach to the Fence and function as a shelf extending the table surface for infeed and/or outfeed. Transform the smaller tabletops by extending feed support and control over a wider area. The 36” XTENDER Fence is perfect for extending small Portable jobsite saws, benchtop saws or bandsaws. Improves safety as wood is easier to control and kept square to the blade.
  • Fast Set Up: XTENDER Fence attaches and detaches from your existing fence in seconds with T-Track Clamps (Required; Sold Separately. Part # XT2). Bow XT T-Track clamps are designed to fit most portable saws, bench top saws, bandsaw, and full cabinet saw fences. Fast Set up ensures convenience to use XTENDER when you need it. Includes special Slot for Delta UniFence and Harvey Fences for quick attach as well. (See kits below)
  • Multi-Position Fence Placement: Milled Clamp Slots are located on the back of the XTENDER Fence and offer multiple positioning options in relation to your Saws fence. Ideal when using a fence longer than your table surface and paired with Bow Feed Support accessory (Part# XT1). Position XT XTENDER Fence forward for greater infeed control; position back for outfeed control; or center placement for infeed and outfeed control. Slots accept Bow XT T-Track Clamps.
  • Add Bow Safety Accessories: Take full advantage of the Bow XTENDER Fence System. Three T-Slots on the face, Top and Back of the fence enable adding woodworking accessories like Bow FencePRO Featherboards, stops, etc. T-slots run the length of the fence and accept 5/16” or 1/4" T-bolts. Check out the kit options and make your saw safer with better control, better cuts and added stability when cutting longer boards. View our available bundles below.


Product Description

bow products larger branded banner premium a+ content

The Add-On Fence Platform That Adds Feed Support, Precision, and Safety

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Delivering Improved Control and Safety

The 36" XT XTENDER Fence

Never before has an add on fence platform added so much value to so many cutting machines. The XT XTENDER Fence, when combined with the Feed Supports, extends the surface of your portable saw, table saw or band saw, allowing for safer and more precise cuts. Once again, BOW Products' innovation adds unprecedented value to professionals, hobbyists, and woodworkers.

BOW Products XT536 XTENDER Fence for table saws

The Benefits of the XT XTENDER Fence System

By combining the XT1 Feed Supports and the XT2 Clamps with the XTENDER Fence, you can maximize the performance and safety of your portable saw or band saw. Click below to learn more about added feathers of each part.

1
2
3
4
5
6
36" XTENDER Fence

View the XTENDER Bundles

Feed Supports

T-Track Clamps

FencePRO FP4

Featherboard FP5

FeatherPRO FP1

GuidePRO GP5

MINI PushPRO PP2

Feed Supports

T-Track Clamps

FencePRO FP4

Featherboard FP5

FeatherPRO FP1

GuidePRO GP5

MINI PushPRO PP2

Feed Supports

T-Track Clamps

FencePRO FP4

Featherboard FP5

FeatherPRO FP1

GuidePRO GP5

MINI PushPRO PP2

Feed Supports

T-Track Clamps

FencePRO FP4

Featherboard FP5

FeatherPRO FP1

GuidePRO GP5

MINI PushPRO PP2


Joan F Gonzalez Gracia
Reviewed in Mexico on July 9, 2024
Robusto y preciso. Se siente y ve de muy buena calidad. Sirve muy bien. Su empaque es de un cartón muy grueso y duro por lo que es difícil que venga golpeado o doblado.
P Symons
Reviewed in Canada on July 30, 2024
I use this on my bandsaw and table saw. The extra length compared to the default fences is very useful. Especially with the other BOW accessories such as the featherboards
Rebecca Fugate
Reviewed in the United States on July 12, 2024
This fence is a huge upgrade for my dewalt job site table saw.Is it cheap, no. Neither are the other Bow products. BUT... the quality of this fence is obvious as soon ad you open the box. The box is a tight fit, with thick walls to help ensure your fence is still straight when it arrives. The fence is made of quality materials and has a great weight to it. It attaches to the fence on your saw with ease.The fence with the platforms attached will be a great addition to any saw. However, with a jobsite saw it almost doubles the length of wood you can cut on your saw without worring about the board becoming as unstable.Saw stop may have the market on keeping you from cutting yourself. But the Bow extender fence with its assorted accessories has the market on keeping kickback from happening during your cuts! And in my opinion the foam tipped push stick and feather boards will go a long long way to keeping you from cutting yourself also.If you are looking to help make your cuts even more accurate this fence is perfect!If your looking to increase safety in your wood working, Bow products are worth EVERY penny!!!For you kids, a penny is a coin worth 1 cent.
Joshua Sifuentes
Reviewed in the United States on June 6, 2024
This is a very well made fence, it’s a great addition to my job site saw BUT be warned of two things before buying it.When held up against a machinist square, it is absolutely not flat, it is within what I would call a moderate tolerance, as it is possible to get the bottommost 3 inches to line up square, and if you have a construction saw that is probably about the max you’ll ever need.Also, the t track slot is too small to fit a standard T bolt. They have bolt sets to attach third party software, but considering I was making use of the Jessem flex stock guides before this, and that utilizes a 1/4 bolt instead of a 5/16 bolt, I had to have the back half of those specific bolts machined off in order to fit the slot.I understand wanting to keep your market share in an area where plagiarism is rampant, but having to take such measures seems extreme for such an otherwise good product.
Mark L Otterby
Reviewed in the United States on December 5, 2024
To start with, this is the first time I've ever been impressed with the packaging of a product received on-line. The cardboard protecting the fence is seriously strong. The package was heavy. Upon opening the package, I found a substantial and high quality extruded alluminum fence extension that exceeded my epectations eventhough this product package is expensive.I have a Dewalt 745 portable table saw that I have mounted on a homebuilt stand. My work area is limited so I purchased the 36 inch version. I build wood structures made mostly using 2x materials and some need ripping up to six feet. This product and accesories offered make this a much better and safer process.The fence accesories need to be purchased eventhough it makes this purchase even more expensive. The feed support is a great addition and the feather boards are very helpfull.
lawnmower man
Reviewed in the United States on December 12, 2024
I use this on my Skil job site saw to add accuracy on rip cuts and does it ever deliver! With the Bow hold downs and other Bow accessories, it makes my small saw cut like a pro cabinet saw. Highly recommend this for anyone looking to upgrade a small table saw. The package I bought cost about the same as my saw itself, but the extra performance, accuracy and, most importantly, safety these accessories provide are well worth the investment! It’s also super easy to install and remove when I just don’t need the extra kit.
Alexander Yavorskiy
Reviewed in the United States on November 3, 2024
It has never been more convenient and safe to use my compact DeWalt table saw. You have to go all in and buy all the associated accessories though. The fence is heavy, high quality and easy to setup. The only mildly annoying part is that it takes special TSlot screws so not that easy to invent your own attachments. Not sure I need too though…:-)
Mike B.
Reviewed in the United States on April 28, 2024
I have an old Ridgid TS3650 table saw. I really like it and the fence is good, but it's also very short. I already had a Bow FeatherPRO featherboard and I love it. The design is ingenious and the thing works so well. I had picked up a pair of the FencePRO featherboards but they didn't work with my fence as it's way too short. So when I saw the XTENDER online, I wanted to get one to my current fence longer, more solid, and allow me to safely and effectively attached the FencePRO featherboards. I ordered the 36" extender and when it arrived, I was pleasantly surprised how heavy it is. This is not a lightweight flimsy aluminum extender. This thing is very solid. (It also came well packaged so it was protected during shipping, and it arrived in great shape.) I was easy enough to hook up to my current fence. I'm sure the Bow fence clamps work well, but I just used a pair of Rockler universal fence clamps that I already had and they work just fine. (These aren't designed for the XTENDER so your results may vary.) After getting the XTENDER set up and adjusted, I added my FencePRO featherboards and they fit amazingly well. I am so happy with this setup now. I can quickly adjust everything based on what I need to cut. Today I resawed some 40" pine 1"x2" boards for a project. Without this setup, I don't think I would have done it as it would have been difficult and risky. With the XTENDER fence and Bow featherboards, it went perfectly. I was able to get the wood through and I didn't have to worry that it was going to fly up or shoot back at me. I can't say enough about how good these products are. I consider all of them money well spent. I highly recommend the XTENDER fence and I would gladly purchase it again.