Your cart is empty.
Your cart is empty. The BRIS BSA380 Black inflatable boat are made by 2000 Denier 1.2mm PVC fabric with aluminum floor board and marine plywood transom. It is a much more heavy-duty PVC fabric than 1100 Denier 0.9mm PVC boats. We also have added double layers of fabric at the bottom of the tubes. This allows 2.4mm of lower tube protection from sharp rocks and abrasive sands. This model is designed for daily pleasure or professional use. It is built strong enough to take max 25 hp engines, Special reinforced fabrics and a durable floor will handle you and all of your gear, year after year. Whether you choose to stay on-board or roll off the plliable sides with your dive tanks on, the BSA380 Black is ready for your next outing.
Specifications
overall length: 12.5ft,
Inside length: 8.33ft ,
Overall width: 5.58ft ,
Inside width : 33inch ,
Tuber diameter: 18.1inch ,
Chambes: 3 ,
Max person : 6 adults ,
Max capacity: 1675 lbs,
Max hp: 25hp,
Boat weight: 180 lbs,
Floor Design: Aluminum floor
Package included ： inflatable boat, aluminum floor, 2 of aluminum seats, one set of oars, foot pump, carry bag and repair kit .
victor mitchell
Reviewed in the United States on September 2, 2024
I have zero regrets regarding the purchase of this Bris boat model. This 380 model is heavy duty and handles well with my 25HP outboard. I always keep it inflated on trailer and I’ve done a lot of customized work on it. Great quality and handling in both ocean or lake.
dmx
Reviewed in Canada on July 25, 2024
Had a Zodiac for many years, until it unglued so much as to be a pain. Wanted a good quality inflatable to be used for scuba diving. Shopped a lot. This Bris is so much more than I expected to find. Well made, well designed. It is 12.5 feet and my little 9.9hp Evinrude brings it to plane with no problem with 500 pounds on board. Plenty of D-rings. Great seats. Easy to setup.Good work BrisBoat.
Barry G. Hawk
Reviewed in the United States on March 26, 2024
HD material. Quite heavy but that is needed on the open waters. We will see how long it last. Arrived undamaged with the exception of a few floor panels needing some straightening of the interlocking channels. Seams all nicely welded. Used a shop vac for initial filling. Foot pump works got to top off pressures. Get a good 0-5 psi gauge to check tubes once inflated. Should work great for our camping water adventure needs.
Gordon Swanlund
Reviewed in the United States on March 24, 2024
We ❤️ this dinghy.Our first dinghy was a 12ft Saturn and we thought it was great!When the Saturn ran its course we decided to try Bris.Exceptional quality! We use this dinghy everyday. It stays in the water behind our yacht.We take it out in the gulf of Mexico and feel completely safe. Even with 6 foot swells.When we are ready for another dinghy we will more than likely purchase another Bris.Great job and thank you for the quality.
zhen li
Reviewed in the United States on October 22, 2024
The media could not be loaded.
Customer
Reviewed in the United States on January 1, 2024
I love this boat! This is my first dinghy and I love it! First time installing the floorboards is a little tricky but you will figure out the groove and it gets much easier after the first inflate. I've had 4 adult males in this thing (it will fit, but it will be a little tight) and it did fine, just a little slow.This thing will haul ass with 1-2 people in it- I paired mine with the Hangkai 12hp 2 stroke outboard. Killer combo with this boat, plenty of power to get on plane and it will do 20MPH in calm water, about 16-17MPH on a choppy day. With 4 large adults (one guy was 280lbs) I was getting about 7MPH and couldn't get on plane.Comes with pretty much everything you need, including oars, but I would recommend getting an outboard if you want to travel any sort of distance with it. I haven't popped anything yet and I've had some passengers do some questionable things in this boat- I was quite surprised how durable the materials they make these dinghys out of is.
Troy
Reviewed in Canada on July 14, 2023
Easy to assemble and inflates in no time at all, I put a 25hp motor on mine and it moves very well. Extremely stable on the water, material feels very durable and I haven’t needed to add air since I first inflated it. Foot pump it comes with is all you will need, it works surprisingly well. I’m very happy with this product
Jamieson Clark
Reviewed in Canada on June 21, 2023
Very stable and seaworthy for any price. Makes 35 kph powered by a yamaha 20hp loaded with two people and fishing gear.
Not a paid review
Reviewed in the United States on June 11, 2023
What prompted this review is the drain plug. The cord to the plug is too long. After some time on the water, doing reverse sometimes, the plug came off. The cord is so long that it reaches the propeller. The prop must of cut it off because the plug was gone.My recommendation, when you buy this boat, shorten the string so it doesn't reach your motor.Otherwise, this is a great boat. I added other mods like wheels, rod holders, boat handles and got an electric pump. Everything pumps to 3.5 psi. There's really only enough room for two people comfortably, and more would get crowded.I used marine paint for the registration, but it isn't great and it was a pain to apply. I should of used waterproof white marine tape and just cut out the letters and numbers, which would of been much easier.
AUSSIE 3D WALL
Reviewed in Australia on January 29, 2023
Great quality. Very tough material and heavy duty. the D rings all around are ready helpful.Also, very quick response from the seller and excellent customer service.
Customer
Reviewed in the United States on July 14, 2022
So we set it up in our garage and at first we struggled to get the floor installed. After fighting with it for a bit we decided to just fully inflate it and let it sit for 2 days. That gave the rubber time to stretch and loosen up significantly. After that, installing the floor was a breeze.The boat is nice and roomy and seems like it'll be stable on the water. We're gonna take it out this weekend for a test run.
Bill Hussey
Reviewed in Australia on November 29, 2022
I got this boat and tried to set it up. It has 4 valves only 1 of which was working. I contacted the seller Bris who blamed me for the valves not working! So, now I have a boat that Bris refuse to refund and one I cant sell second hand because the valves don't work! Total waste of money.
Sonnyc
Reviewed in the United States on May 15, 2021
This is a great boat. I had it out for a few times now and it is very stable. I have a Tohatsu 20HP on it and it planes nicely with 3-4 people around 12-15mph. I have it on trailer so can’t really speak about tear down and beach launch but the initial setup wasn’t bad at all. There are youtube videos on how to do it and after a few times, it gets easier.This boat is a bit heavier than others in the same size due to it uses thicker material and has double layer on the bottom.Customer service is also great. Mine was missing the flap inside the one way valve and after sent a message to Bentflyworlds, they sent 3 to me in 2 days.
Recommended Products
$969.00
$ 99 .00 $99.00
$1,099.00
$ 99 .00 $99.00
$989.00
$ 99 .00 $99.00