Your cart is empty.
Your cart is empty.Signature rings are the most significant technological advancement in scope mounting history. Signature rings are for the shooter who demands the best performance from his equipment and is a practical thinker. The benefits of this revolutionary design are many consistent accuracy, tremendous gripping power, scratch-free and stress-free mounting and scope value preservation. By putting a synthetic pivoting insert within a steel outer ring, your scope-to-ring surface area contact becomes virtually 100%. Burris rings and bases have long been favorites of custom gunmakers because of their strength, beauty, and fit. It's easy to recognize Burris' leadership role in scope mounting systems when you consider the myriad of innovative designs and manufacturing processes that result in rock-solid performance. Each ring is made from a solid piece of steel with the top and bottom half perfectly mated. Zee rings with no moving parts are the best fitting and most positive gripping Weaver-style
Brandy
Reviewed in the United States on January 20, 2024
I really like the plastic inserts. These are the second set I have purchased. Not sure why I don't have more of them. I believebthey are a little low for what they say. I ended up having to get high but that will vary per mount. I wish actual ring height measurements on the rings was easer to find.
bernard daudin
Reviewed in France on June 25, 2020
sur la photo il y a 2 trous de fixation ;;en réalité il n y en a qu un au déballage
Havana Harry
Reviewed in the United States on June 25, 2017
While these rings are expensive, it is far more expensive to damage your scope and have to toss it or send it in for a major $$$ repair. I used these rings with the .20 corrective inserts to adjust for poorly mounted bases on a Mauser sporter (rear base was higher than the front base). It worked perfectly! The corrective inserts can be rotated to eliminate imperfections in the bases whether horizontally or vertically or to gain additional adjustment when the scope's turrets have reached their internal limit. After seeing how well these rings work, I would not use any other rings when mounting an expensive scope. The plastic inserts allow you to firmly mount the scope without over torquing the screws even on magnum caliber rifles. The inserts completely protect the tube of the scope from damage and I suspect also absorb some vibration from recoil to help protect the internals of the scope even though Burris does not make that claim.
Justin N
Reviewed in the United States on March 26, 2017
These rings are awesome. I bought a Savage 16 XP Trophy Hunter in .308 caliber and Nikon Scope a couple of months ago. The gun shot great, but the scope rings just would not stay tight. I tried Weaver rings, and they would not stay tight either. After research and asking at the gun range, I went with these since they are solid steal, the bases that match are solid steal, and the screws are solid steal. The ring inserts are great and hold the scope tight, and you can make sure the rings are tight without fear of damaging the scope due to the inserts. I loc tighted the screws and bases, and went and shot 100 rounds through the gun today. I put marks on each screw and the scope body and rings to make sure nothing moved at all when I went to the range. Everything went great, and I'm happy I finally have a set of rings that work well and I don't have to worry about. Thanks Burris and thanks Amazon! I'm glad to finally be able to use my gun without wondering if the rings are holding up. A good gun is useless without scope rings that do their job!
rickfan
Reviewed in Canada on January 26, 2016
A1 set of rings, and made of good quality steel
Kevin Witty
Reviewed in Canada on August 3, 2015
Great set of rings
David
Reviewed in the United States on February 27, 2015
I did a lot of research before buying new rings to put on a Browning .30-06 rifle. The old rings did not hold up over years of use, and eventually flexed on every shot. That's unacceptable for a hunting rifle. I read the reviews for the Burris Signature Zee Rings on this website. As others have said, the video on the Burris website explaining how these rings can fix the problems that rifles, scopes, and rings have is excellent. Go to their website and watch it. I ordered the inserts with these rings. I went to the range, set my scope to mechanical zero and followed the directions. I quickly saw the problem that had plagued my shooting. I am not a gunsmith, and these rings allowed me to adjust my scope to perfectly align with my barrel. (I did use levels) It was very easy to switch out the inserts in the rings and rotate them. I believe the inserts in these rings hold the scope much tighter than any other rings I looked at, and protect the scope very well from the recoil of a high-powered rifle. Within a few minutes I had a tight grouping very close to center without even adjusting the windage or elevation on the scope yet. One or two 1/4" MOA clicks over and up, and I had zeroed my rifle. These few adjustments allow me to have the full field of view of the scope instead of making lots of adjustments on windage and elevation. If you need more than just a few "clicks" to zero your rifle, you should definitely consider buying these rings. Because of the design of my BAR and the mounts available for it, I was limited in options. Instead of paying a gunsmith to find a solution, I was able to figure out the problem and fix it myself. The whole process took me less than an hour, and I did not come close to using a whole box of ammo. I did, however, end up shooting many more rounds later on to make sure my long range shots held dead on. Now, I confidently pull the trigger and know I am always taking an ethical shot.
Daniel R. Henninger
Reviewed in the United States on November 3, 2015
WOW! Finally, rings that actually work. Mounted these babies on my Hatsan AT44S-10 in .177. I have a long and short barrel and I switch between the two whenever I get the whim. With these rings going to different barrel lengths isn't a problem. I can pretty much center my scope (6-24x50mm AO) without using the adjustments on my scope. Easily and quickly. I tried another brand of adjustable rings and they went back the next day. I've been shooting for many years. Used countless different scope rings from 20 bucks to almost 200 bucks on my more pricey rifles and scopes. Have had rings laped and have done a few myself, what a pain in the a$$! After fitting my PCP with these I'm thinking of changing out all of my rings. SERIOUSLY! I bought the insert kit just in case but didn't need it. My friends have been using these for years and swear by them. I thought they didn't look any better than others. Boy was I wrong ...The fit is very tight. These suckers are solid beyond belief. I bought the 1" high matte models. I had to remove the fiber optic rear sight but since I've never used the fixed sights it's not that big of a deal. For my 60mm and above objective scopes I'll have to buy a rail riser. They're cheap and easy to find.These rings do require a little more work to fit them properly but the end result is well worth the extra effort.If you're looking at less expensive adjustable rings or any kind of ring for that matter, stop looking and try these. If you don't like them send them back.I'll bet you won't!Small note: IMHO the torx wrench that comes with the rings isn't of the best quality. I recommend getting or using a torx that you know is of good quality. (Torx #15). Since most of us DIY'ers have our own sets of tools this isn't a deal breaker by any means.
Recommended Products
