Your cart is empty.
Your cart is empty.From the manufacturer
Machined to Exact Tolerance
Expertly engineered and machined to the highest standards, the Zee Ring is designed to hold your optic with absolute precision. Crafted to exacting tolerances, it ensures a secure, rock-solid fit that maintains perfect alignment, even under heavy recoil or harsh field conditions. Each ring is meticulously crafted to provide uniform pressure, preventing any movement or slippage, while protecting the scope from damage. The result is flawless, reliable performance, allowing for consistent accuracy shot after shot, making this scope ring an ideal choice for precision shooting applications.
Solid Steel Single Frame
Expertly engineered, the Zee Ring holds your optic with absolute precision. Machined to exacting tolerances, it ensures a rock-solid fit, maintaining perfect alignment even under heavy recoil or harsh conditions. Each ring provides uniform pressure, preventing movement or damage to the scope. The result is reliable, flawless performance and consistent accuracy, making it ideal for precision shooting.
Built for Perfect Fit
The Burris Zee Rings feature top and bottom components that are meticulously matched for strength and fit; This seamless integration enhances the overall stability, minimizing the risk of movement or slippage during use
At Burris, we focus on what matters.
Accuracy, durability, and innovation. Every product relies on nearly 50 years of optical engineering experience to offer a perfect combination of features and performance to ensure a successful hunt or day at the range. Our optics are built to provide a lifetime of reliable performance.
GA_dw
Reviewed in the United States on February 12, 2025
These fit my Burris scope. They are Burris mounts so I will assume they are just fine with only one screw per side on my Burris scope.
Chris
Reviewed in the United States on January 15, 2025
I mounted the scope rings on my rifle scope mount. The rings seem to be good quality . They are made of steel and the mounting screws were all satisfactory. The installation directions do not include a torque setting for the scope ring base screw.
Doughboy
Reviewed in the United States on September 10, 2024
Easy to install. Torque up nice and tight. I wouldn't recommend using the included torx allen wrench, you wont have any way to verify torque. The torx Allen wrench will work fine for removal. Get a wheeler fat wrench and do it right. Quality steel mounts and screws. I like the matte black finish. Easy to slide rings over the rail and know they aren't coming off, unless you unbolt them and slide them off. A small drop of blue loctite on each screw and you should be good for as long as desired. I like the design of the bases flexing against the rail as tightened, instead of a separate removable piece. To me, it's one less part to be dropped during install. I also feel the design helps keep the bases aligned better.
rgb1150ms
Reviewed in the United States on March 16, 2024
Quality is good and well madeA bit bulky on the latch throws but that’s understandableI placed these on a Ruger 10/22 and found too bulky for my taste but kept them for future use
Scott
Reviewed in the United States on November 12, 2024
Works great. they're solid and hold the scope tight.
Art G.
Reviewed in the United States on November 11, 2024
Used these to mount a Vortex 6x18x44 on a Remington 710 with the factory supplied base. Happy to find steel rings that actually fit the Weaver bases snugly. Not overly bulky or heavy. Used the medium height rings and it worked great. Plenty of bolt clearance and 1/8 inch between the objective lens and the barrel. Cleared the caps that came with the scope. Remember, these rings slide on the bases from the end. Don't snap them on from the top. You may get a rude surprise.Crossbolt fit snug in the slot. Just enough play to bump it forward against the front lug before tightening.No lapping on this set. Scope bars were spot-on for alignment.Looked up the torque specs for my 30mm rings on the burris website and applied it with a fat wrench. 20 inch pounds for the ring cap screws and 30 inch pounds for the crossbolt screws. I used a T15 bit in lieu of the supplied wrench. I degreased the screws with gun scrubber along with the female holes before installation. Loctite blue was applied to the crossbolt threads. None on the cap screws. Dry torque was used for the cap rings, wet torque adjustment for the loctited crossbolt screws.Happy to report the rifle was nearly dead on at 25 yards. Made it simple to zero at 100 yards and saved some ammo sighting in. The rings match the matte finish on the rifle very well.Overall, well worth the cost very pleased with these.
Darlene S.
Reviewed in the United States on October 15, 2024
I have purchased Burris products for over twenty plus years. They have never let me down in the field or countless shootings secessions Never scrimp on Quality of Rings or Optics!
Alex
Reviewed in Canada on June 14, 2023
Fits perfectly on my rifle
Luigi Amato
Reviewed in Canada on December 6, 2022
fits ok .
Pascal9790
Reviewed in France on September 24, 2019
ce produit polyvalent peut être aussi monté sur des embases à fetes arrondie. La vis latérale servant de cran bloquant. En acier , donc très rigide.
BRW
Reviewed in Canada on August 20, 2019
I've purchased these rings from other sources in the past. They work, fit and are exactly as described. I recommend these QD rings. I also add that you have to make sure the levers are tight...they can shoot loose.
Glenn
Reviewed in Canada on December 14, 2017
A solid mount.
J.Wick
Reviewed in the United States on April 15, 2015
The rings are really good. Solid construction obviously...they are steel rings.The hardware is where it counts. The screws are great. I tend to torque my screws down a little too tightly....I had a scope come loose on me once so now I over tighten them all. I know I shouldn't but has become a bad habit. I have stripped the heads out of a few other ring sets in the past from doing this. The Burris zee rings were very easy to install and not even the slightest marring in the screw head (#15 torx) from the added torque I put on them. Used some blue thread lock and now am in business. Many rounds later not even close to moving down the scope tube. I will be buying more in the future. This is a great product and looks good doing it. I got the gloss to match a classic Leopold gloss scope on my Henry goldenboy and it looks like it came that way from the factory...just a great set up....could not be happier. I hope this helps someone on the fence about buying this product. For the money they are hard to beat. Hard to beat at higher prices as well...just great quality. If any or all of this review has been helpful to you, then please click the "helpful" tab below. Also please feel free to visit my profile page for more of my reviews. Thanks for reading. Peace.
Recommended Products