Your cart is empty.
Your cart is empty.Product Description
Compatible RS232 Devices
USB to RS232 adapter works with modems, ISDN Terminal Adapters, digital cameras, label writers, palm PCs, PDAs,cashier register,CNC,PLC controller,tax printer,POS, bar code scanner, label printer, etc.
Compatible Operating System
- Windows 10, Windows 8, Windows 7, Vista, XP, Windows 2000 (Windows 7,8,10 should auto detect and install the drivers).
- Driver free for Windows 7/ 8/ 8.1/ 10 system, when the pc connect the Internet, it should auto detect and install the driver.
- For other systems, you should download the drivers from our cablecreation official site.
- MacOS X 10.6 and above (both computer and device must support macOS).
- Linux kernels 2.4.31 and later.
Plug-n-Play
- Plug & Play after one time driver installation;
- Built-in with FTDI chipset
- Powered by USB port, no external power adapter required.
USB to RS232 DB9 Serial Converter Adapter Cable
Check the Pin-outs
1. Before buying this cable, please check the pinouts in the picture to see if your RS-232 devices' are the same with ours.
2. USB 2.0 to RS-232 - Installed as a standard Windows COM port, Full RS-232 modem control signals, RS-232 data signals; TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND.
3. You can find the corresponding driver on our CableCreation official website and install it on your PC or laptop to enable this adapter.
Xavier
Reviewed in the United States on August 30, 2024
I spent so much trying to find the correct FTDI chip. Some post that it has it while they have the PL23xx chip which is a cheaper less reliable version. I hate that Amazon allows people selling and scamming people but atleast they back you up. This is the correct cable and chip my telescope mount needed. I had to order another one just in case. I rather have the one that works then looking all over again for it. Thank you for being real and selling a good quality cable.
RoyA
Reviewed in the United States on July 16, 2024
This cable work great in windows 10 and 11. Don't have to search for device drivers, as windows support it.The annoying message that this device is not supported after 2012, which I get with cables with other chipset, is gone.
Placeholder
Reviewed in India on December 8, 2024
Excellent product. It's working with Windows 11 pro version and extended USB cable. Very good product.👍👍👍
Harry Zhao
Reviewed in Australia on October 26, 2024
Perfect!
VALOT Sophie
Reviewed in France on February 8, 2020
Absence de port série sur mon ordinateur. Installation automatique au branchement sur l’ord Sous Windows 10. Fonctionnement ok, pour mon vieux logiciel de machine à coudre avec adaptateur pour transfert sur disquettes spécifiquesRavie de cet achat
Customer
Reviewed in the United States on January 2, 2020
Arrived early. Came with CD to install drivers. Worked as it should.
Ivan
Reviewed in the United States on September 30, 2019
This review is for CableCreation USB to RS232 Adapter (FTDI Chipset). I have a Raspberry Pi 3B+ with Raspbian Jessie, and this adapter plugs right in and is configured automatically - no drivers need to be installed. It is assigned the device name "ttyUSB0" if it's the first USB serial adapter, "ttyUSB1" if the second, etc. Using it with the Python "serial" module is a snap. It is a good, inexpensive, no-frills way to add serial ports to your Pi.
Sam A.
Reviewed in the United States on September 18, 2019
I was trying to avoid buying a specialty device cable from the manufacturer. Think %1000+ markup (literally). I initially ordered another USB to RS-232 (prolific chipset) cable but failed to notice that the product drivers specified FDTI. This cable fits the bill and functions at a fraction of the cost. Generally speaking if you are using this cable for a DIY project I would say go ahead and pony up the couple extra dollars for the FDTI cable. It seems to play better with windows 10 (I am unfortunately forced to use) and after doing research into the subject is more compatible in general. I noticed a lot of one star reviews on the other cable stating it was DOA, I tend to believe that people failed to do their research and were unaware of the two common chipset styles that may or may not work in specific cases like mine.In short this is a quality cable and the one I would advise purchasing but do your research and make sure your device drivers are not dependent on a prolific chipset.
Richard Mills
Reviewed in the United Kingdom on March 14, 2019
The software that I am using this with is quite picky, this is the only one it will work with, and it does work very well. Gold plated too, so no chance of a corroded pin or the like.
CESDewar
Reviewed in the United States on November 12, 2019
So... Why? Well I have a brand new Telescope mount from iOptron, but to upgrade the firmware, they need a serial port(!). I HAD an old usb/serial port converter, but no driver for windows. THIS converter installed, picked up driver automatically under a windows 10 (did not even need to fiddle with mini-CD) and it worked flawlessly, my mount updated its firmware uneventfully... Very happy
Joel H.
Reviewed in the United States on October 31, 2019
After reading reviews from other USB to RS232 cables, I decided to go for this one due to it using the FTDI chipset. Setup couldn't have been easier and the cable works like a charm. I'm using it from my amateur radio to my laptop. Would buy again if the need arises.
Mike Reed
Reviewed in the United States on October 1, 2019
Will not work in windows xp even thought it said it would. Driver does not support xp
Steve
Reviewed in the United Kingdom on March 16, 2018
Works perfectly
Recommended Products
$157.08
$ 63 .99 $63.99