Your cart is empty.
Your cart is empty.Product Description
Central Brass 466 Two Handle Laundry Faucet Commercial Quality Wall Mount Easy Installation
Parts Detail
• Its two lever handles with an easy-turn design makes finding the perfect water temperature simple.
• The tube spout has a generous 6" reach and swivels for the best possible angle to make cleaning up a breeze.
• The faucet features convenient replaceable seats, straddle legs, and quick-pression quarter-turn stems, 1/2" direct sweat inlets, hose thread, and 3-1/2" centers.
Built to Be Tough
The faucet is designed to be exceptionally durable. It's built to withstand accidental bumps and even heavy use in a commercial setting.
Easy Installation
Our comprehensive product installation guides are designed to make installation as quick and as easy as possible. The guide features practical illustrations of all parts involved alongside detailed descriptions of the entire installation process.
MrB
Reviewed in Canada on March 12, 2025
It's much better than the 60 year old unit it replaces
Brett A.
Reviewed in the United States on March 10, 2025
Quality faucet. Easy to install. It was replacing an existing faucet that had a pex connection soldered on. This faucet allowed supply to accept 1/2” male NPT. So I ended up getting 1/2” male NPT to 1/2” pex connections and just pieced it in. Zero leaks and start to finish in under 10 minutes.
Wallville
Reviewed in the United States on February 20, 2025
worked out nicely! new water faucet in the garage, hooked up the dog wash hose, now they get warm showers outside of the house after muddy winter walks. perfect!
John W.
Reviewed in the United States on January 31, 2025
This faucet was essentially a match to the one installed 25 years ago when we purchased our home. Installation was a very simple connection and the unit works perfectly.
Jordan
Reviewed in the United States on September 8, 2024
Was super quick to put together. Removed the old, put this one in, reconnected my (new) lines.Side note, don't waste your money on push fittings. They work amazing until one day they won't. And you'll be super annoyed. Just spend the 40$ on a pex crimp tool and use pex-b fittings and crimp rings (NOT cinch clamps). Life changing.Very good price compared to what I could get at a box store, and better reviews. The brass is SOLID. Very heavy feeling material.
JL
Reviewed in the United States on August 10, 2024
Replaced and old sink faucet that was wore out. This worked like a charm. Easy install
royc
Reviewed in the United States on July 19, 2024
I bought this faucet to replace a 20 year old Central Brass laundry sink faucet that broke. The new faucet was as well constructed as the original one was when new and a perfect fit for my application. The only complaint I have with this faucet is that it still uses old-fashion rubber washers instead of cartridges. I had to replace washers and O-rings on the previous faucet during its lifetime.
LG
Reviewed in Canada on March 23, 2024
Pour cuve de lavage, fonctionne bien.
Alex Cook
Reviewed in Canada on November 17, 2024
I attached this to use with our old concrete laundry sink, easy install, works very well. We soldered right to it and there are no leaks.
audrey
Reviewed in Canada on August 8, 2022
expense but well made and it worked great
Lance
Reviewed in Canada on July 26, 2020
I have very hard water that does a real number on gaskets and seals in my taps and faucets. My old laundry sink faucet would always leak from corrosion on the seat face. Couldn't be fixed so I had to replace. These look really good and are very solid. Hopefully they will last a while.
Indoor Kitty
Reviewed in the United States on June 19, 2016
Our money-pit's basement came with an enormous concrete utility sink that was served by two hose bibs on the ends of some galvanized pipes. We re-plumbed with pex and needed a simple faucet for this sink.For whatever reason the inlets on this faucet are listed as NPSF instead of NPT. I decided to be a rebel and use NPT threaded fittings and teflon tape. Everything is holding just fine so far.I had a pair of threaded 1/2" NPT brass nipples and a pair of 1/2" FPT x 1/2" PTF Sharkbite brand couplers in our box of random plumbing parts. If I were buying new fittings, I would have bought MPT x PTF Sharkbites.Attaching the faucet to the sink was a little more work. The sink is right against the wall and too heavy to move; the set screw for the faucet's mounting bracket is on the back of the fixture. By removing and swapping the handles and cartridges, I was able to reverse the faucet and allow the temperature handles to turn down towards the user to open the valves.GLOSSARY*NPT: National (American) Pipe Thread or National (American) Pipe Tapered, depending on who is doing the talking. Needs teflon tape or pipe dope to seal the connection.*MPT: Male (National) Pipe Thread, an elliptical abbreviation for male members of the NPT family.*FPT: Female (National) Pipe Thread, an elliptical abbreviation for female members of the NPT family.*NPSF:National Pipe Straight, Fuel. Straight threads instead of tapered like NPT fittings. Intended for fuel.*PTF: Push-to-Fit connection. Colloquially called Sharkbites after the brand. As the name suggests, you push to fit them onto the pipe, and installing them requires no other tools but a cutter for the pipe and your hands. If you are transitioning from Pex pipe to another type of pipe, this is the easiest way to do it. Depending on the manufacturer, these can be used for copper and cpvc pipe as well as pex.*Nipple: a fitting with male threads on both ends.*Coupler: a one-piece fitting that is "female" on both ends. A threaded coupling has a threaded female opening.
Mook
Reviewed in the United States on February 5, 2016
I had the cheap LDR valve also on Amazon. I am so happy with this new central valve. I was a buyer for a small motorcycle manufacturer here in Milwaukee and I know quality. Just in weight, this Central beats the LDR by many miles. A three year old could take my old LDR valve and throw a 90 yard Rogers Hail Mary with it. This Central is solid and heavy. It also meters so much better than that old leaky LDR, fom a trickle to full flow this valve performs outstanding. I'm a old geezer and rarely leave reveiws, let alone five star ones. My LDR lasted 5 years but because I attached a hose to it to wash my dog, the faucet actually fell off. I tried getting replacement parts from ACE but they told me try the manufacturer. I did and discovered to get a replacement part from LDR requires a act of congress and we know what that takes! The LDR started dripping after one year but the actual faucet blew off last month, not being capable of handling the hose. This Central is a great valve and if you are not a fan of man-scaping, this is your valve. And the design of the faucet itself is solid and has no problem handling the weight or back pressure of the hose, when attached. I'd say I'd buy it again but I doubt I'll ever have to. Ace has these parts.
Recommended Products