Shopping Cart

Your cart is empty.

Your cart is empty.

CHANCS 895 Mini Table Saw for Wood Cutting DC 24V 12000RPM PWM Monitor Dimmer Governor with Switch and Knob Output Voltage DC 9-60V

4.3 (1) Write Review
Free shipping on orders over $29.99

$69.99

$ 29 .99 $29.99

In Stock

About this item

  • *Attention: 1.The set can use adjustable speed power supply, or switching power supply. 2.Always disconnect the power when wiring. 3.When installing, please tighten the saw blade and screws so that the saw blade will not fly out and hurt people when the motor starts.
  • *Application: Hand tools,garden tools, power tools,shredder, sprayer, small cutting machine, small table saw for cutting/polishing.
  • *Specifications of motor: Rated voltage: DC 24V; No-Load Speed: 12000RPM; Torque:≤10Kgf.cm; No-load current: 0.5A; Power：150W; Shaft Diameter: 5mm; Shaft length: 16mm; Length：72mm; Width: 48mm; Mounting hole distance: 29mm(M4 screws)/32mm(M5 screws);
  • *Slider Size： Total length: 159mm(6.26")； Mounting holes for M5 screws； M10 bush is suitable for saw blade with inner diameter 16mm（0.63"）, outer diameter 110mm(4.33"), common with angle grinder. B12 drill chuck clamping range is 1.5-10mm(0.06"-0.39").
  • *Belt Pulley Size: Large pulley: 48 teeth, inner diameter 12 mm(0.47"); Small pulley: 16 teeth, inner diameter 5 mm(0.2"); Timing belt circumference: 240mm(9.45").


Product Description

Attention:

  • The set can use adjustable speed power supply, or switching power supply.
  • Power supply current can not be less than 10A, the recommended use of current greater than 15A power supply.
  • When installing, please tighten the saw blade and screws so that the saw blade will not fly out and hurt people when the motor starts.
5

  • The adjustable voltage range is really smooth, adjustable from 9V to 60V, continuous power 12600W. Suitable for DC motors within 20A
  • The governor can control the rotation speed of the motor from the original 0%-100% infinitely variable, extremely advanced technology, high efficiency, high torque, small heat generation, wide range of applications.
Specification of PWM:

  • Input voltage range: DC 9-60V output voltage；
  • Speed range: 0-100%；
  • Continuous current: within 20A；
  • Continuous power: 12600W；
  • Control frequency: 25KHz clockwise/counterclockwise rotation; support DC brush motors;
  • DC brush size: 92x52x36mm;

895 单轴

Specifications of motor:

  • Voltage: 12V DC
  • Speed: 12000RPM
  • Starting current: 4-5A
  • Power: 100W-200W
  • Motor Body Diameter: 48mm
  • Motor Body Length: 72mm
  • Shaft Length: 16mm
  • Shaft Diameter: 5mm

2

Size of Bracket:

  • Thickness of bracket: 2.8-3mm；
  • Length: 50mm ；
  • Width: 53mm ；
  • Height: 62mm ；
  • Mounting hole diameter: 5.2mm/4.2mm

3

Slider Size：

  • Total length: 159mm(6.26")；
  • Mounting holes for M5 screws；
  • M10 bush is suitable for saw blade with inner diameter 16mm（0.63"）, outer diameter 110mm(4.33"), common with angle grinder.
  • B12 drill chuck clamping range is 1.5-10mm(0.06"-0.39").

3

Belt Pulley Size:

  • Large pulley: 48 teeth, inner diameter 12 mm(0.47");
  • Small pulley: 16 teeth, inner diameter 5 mm(0.2");
  • Timing belt circumference: 240mm(9.45").
3

Package Contain:

  • 1 x PWM Controller
  • 1 x Slider
  • 1 x Motor
  • 1 x Bracket
  • 4 x Wrenches
  • 2 x Wiring Terminals
  • 1x Saw Blade
  • 1 x Timing Belt
  • 1 x Drill Chuck Handle
  • 1 x Belt Pulley

Wiring Method

6

Cliente
Reviewed in Italy on December 21, 2023
Ottimo prodotto funziona molto bene almeno con il taglio del legno