Your cart is empty.
Your cart is empty.Changeover switch mainly suitable for electrical wiring in the power switch and Squirrel cage type asynchronous motor start-up, reversing, speed switches, also can make the conversion of the control circuit, testing equipment control switch, or change-over switch for electric welding machinery and other equipment.
- Feature plastic external material, 3 positions(ON/OFF/ON), locking action type,
- Suitable for the thickness between 1mm to 5mm of the mounting board.
- Rotary selector design switch, easy to control, square plate and screws for easily mounting.
Specification:
- Product Name: Changeover Switch- Model No.: LW28-32/2 Ui: 660V; Ith: 32A
- Positions: 3 Positions(1-0-2, ON/OFF/ON)
- Terminals Quantity: 8
- Overall Size: 88 x 64 x 66mm /3.46" x 2.52" x 2.60"(L*W*T)
- Total Weight: 245g
- Action Type: Latching
- Package Content: 1 x Changeover Switch, 5 x Screws,1 x Instruction Manual.
Danny Young
Reviewed in the United States on August 1, 2024
Did the job nicely!
aforetaste
Reviewed in the United States on June 6, 2024
Good quality build, installed it in a robot as a power off/battery/charge switch. Would recommend
Chip
Reviewed in the United States on September 19, 2023
I like this switch. I’ll purchase more as I need them. It’s easy to wire and has a strong click when selecting position. A good solid click makes all the difference. It’s easy to find instructions on YouTube if you’re a visual learner.
Ellie & Mason
Reviewed in the United States on December 30, 2022
No markings for 'top'... used an ohm meter to figure it out. Face plate came slightly scratched...
Majid
Reviewed in the United States on July 29, 2021
I used it to switch between two source of power and the design is good but not perfect. I scare that wires comes out of it with little moving. I thighed it as much as I could, but because of the kind of wire holder on switch I am not sure about it.
Alpine Doug
Reviewed in the United States on March 3, 2021
This is a great product and it works well. Other reviewers have commented on the lack of instructions, and they are spot on. There are no instructions that can be understood by humans. But if you look carefully at the pin diagram on the switch, and if you confirm it with a VOM or continuity tester, you'll be good to go.I used this switch to connect an outside generator to the refrigerator inside my house. I needed it to switch from the house circuit to the generator, when I lost electricity. It works perfectly for that purpose, I couldn't be happier. In the photo, you'll see a triple gang blue wall box, a changeover switch, some faceplates and a recessed power inlet. I finished it off with some 1/4" high black adhesive vinyl lettering:Inlet: https://www.amazon.com/gp/product/B002XDQAA6/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1Wall box: https://www.amazon.com/Carlon-B355R-5-72-Inch-2-79-Inch-3-69-Inch/dp/B000BQOXAG/ref=sr_1_7?dchild=1&keywords=3+gang+retrofit+wall+box&qid=1614810752&sr=8-7Lettering: https://www.amazon.com/gp/product/B002XIHXJS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1Now, when I lose power, I simply plug my generator into the power inlet and turn the transfer switch to "GEN".
Aaron
Reviewed in the United States on April 19, 2021
Awesome compared to all of the other ones that I took a look at, the set up is fairly easy it’s very robust. Wiring is very easy if you stop and think about it, wiring instructions are not very good but there is a lot of Internet help. I am running power through a VFD to the switch that I can either use my 3hp / 3 phase South Bend lathe For my Cincinnati 3hp / 3 phase dual post grinder. The switch handles heavy duty wire and is robust when you change from one leg to another leg. I tried two other switches (different brands) before this neither of them worked once again neither of them had instructions. I am a home hobbyist and I run 3 phase machines out of a small garage and this product really helps to keep everything aligned. I installed in a large plastic electrical box that I purchased from Home Depot and used all heavy duty wiring and connectors.
MarkS
Reviewed in the United States on December 8, 2020
I've updated my review below. I put in the replace request and a new switch arrived a couple days later. That was a fast turnaround. I've tested the new switch with the ohm meter and it works as expected.When it arrived, it was in position 0. It will switch to position 2, but not position 1. Also, in position 2, ALL the lines for pos1 & 2 are connected, which is not correct. The attached pic shows the switch in position 2, with an ohm meter across screws 1 & 2, which should be Open according to the grid but are Closed.I'll upgrade this score depending on how easy/difficult it is to return for a replacement.
Recommended Products
