Your cart is empty.
Your cart is empty.
If you need the perfect cold air intake addition to improve your engine’s torque and efficiency, MOOSUN Air Intake Kit is a perfect addition. The presence of the right cold air intake can make the difference between the performances of your truck. This is why we recommend this as it comes with amazing features to make your automobile engine’s operation effective
With this cold air intake, users will enjoy an improved fuel economy which translates to a 64% increased flow. This improves the engine torque and horsepower giving you a nice boost as well. It is easy to install and gives a perfect fit for your engine after installation.
With a moderate weight of 6.7 pounds, it is the ideal fit for 2003-2007 Ford 6.0L Powerstroke, OHV V8 POWERSTROKE DIESEL TURBO, and others. With our cold air intake, you can achieve a better and efficient flow compared to the factory fitted one. Traditional airflow assembly is small, restricted and limits your vehicle’s performance, but a cold air intake will help improve your vehicle’s performance.
Fitment:
Fit for 2003-2007 Ford 6.0L Powerstroke
Fit for 2003-2007 FORD F-250 SUPER DUTY 6.0L 363ci OHV V8 DIESEL TURBO, VIN "P"
Fit for 2003-2007 FORD F-350 SUPER DUTY 6.0L 363ci OHV V8 DIESEL TURBO, VIN "P"
Fit for 2003-2005 FORD EXCURSION 6.0L 363ci OHV V8 DIESEL TURBO, VIN "P"
Does not Require Removal of Turbo, Intake Manifold or Up Pipe
Completely Replaces, No other Parts Required
Package Includes:
4" mandrel bent Tube
NPT fitting for attaching boost gauge
Flared 4 inch clamp end and clamped filter end
Conical filter with hose clamp
Access port and cover plate with screws and o-rings
4" silicone coupler with hose clamps
Silicone hose
Installation bracket
Anthony castruita
Reviewed in the United States on January 8, 2025
This intake works great. But it does not come with instructions. And the hardware that came with it was way too short to get the nut on the bolt. So I just bought a bolt, lock washer and clinch nut from Napa. That’s the only reason for 3 stars and not 5.
Chris
Reviewed in the United States on September 2, 2024
The sensor wasn't clocked right the tube had the wrong bend also make sure you check the welds I mean what the ......
Dylan
Reviewed in the United States on September 18, 2024
This is no $400 S&B cold air intake but this is a affective and affordable product yes you have to do some trimming and it’s a little difficult to put the boot fully around the turbo but all in all it does what it needs to this was about a 20 minute install highly recommend if you are on a budget build
Will Guinter
Reviewed in the United States on March 23, 2024
Have a 6.0 2004 excursion. Very easy install. Got great with no issues.
Francis rd
Reviewed in Canada on August 31, 2023
Mal conçu sa à-côtés partout pi le tuyau du pcv fait pas pantoute on peut pas mettre moint 10 étoile c plate en criss
Richard Wilde
Reviewed in Canada on June 6, 2023
Actual product is junk. Would not bother, thought I could use the aluminum tube at the least, would take a lot of work to clean the crap welds up on the inside. (there is a lot of material left over from the tig welding, prolly do not want goin through your turbo). Just saying. I ordered proper couplers, hose, and clamps from HPS to supplement the garbage that, as I expected for the price, would be included. Suit yourself. My honest opinion.
Cody castricone
Reviewed in the United States on October 7, 2023
Super straight forward process to install, never had to cut or shave anything, truck is much happier and can breathe like it should, coating is fragile so can scratch easily, but come on people, its a $90 intake with filter, theres not much more to expect than whats pictured, works great, buy it if your on a budget like me!
Josh
Reviewed in the United States on June 28, 2022
It's an OK cold air intake.Good: very easy to install. All the pieces fit my truck fine(maf, coupler,etc). It's heavy and thick. Bracket was equally thick and solid. Comes with everything you need to install.BAD: The filter didn't fit the unit. The unit opening was just under 4" the filter opening was 3 1/4". If I hadn't put everything together before I would've been in the middle of my install and SOL. Lucky my truck was getting fixed and I brought my CAI to the shop and he gave me a k&n filter that fit. Extremely upset about that as I have to get buy a new one for proper air flow. The hose that comes with it you will have to cut about 2" off(not a big deal..as that is pretty common on all of these), then it fits fine. No directions but if you go on YouTube you can see how to install(very easy.. basic tools and simple skills will suffice).All in all it's about what I expected, nothing fancy but usable. I'll be upgrading soon, just using this because it's better than the oem. If you buy this don't expect super gains out of it but DO expect for there to be some minor issues with varying pieces. I went with 4stars cause it does look good, it functions as it should and the price is reasonable(even though i have to spend an extra $50 to get a proper filter... would be nice if yall sent the correct one since i did pay for it) , but I probably should've went 3 stars.
Cody M Yontz
Reviewed in the United States on February 12, 2021
Its not very well built. Nothing likes up, rubs the charge pipe as well as the degas bottle. Not expanded on the ends to hold the boots.Was still full of shavings when i got it. The crank case tube is isn’t aimed at the valve cover.The map sensor mount isnt cented up to the hole in the pipe, had to smooth it out, and debur every cut made in the pipe.2/3 hose clamps fell apart while tightening it.Would not recommend.
Customer
Reviewed in the United States on August 30, 2020
Fit perfect in my truck
Recommended Products
$427.75
$ 99 .00 $99.00