Your cart is empty.
Your cart is empty.Product Description
THE ERROR CODE P0335
Error Code P0335 is described as Crankshaft Position Sensor “A” Circuit Malfunction. This means the vehicle's ECM (Electronic Control Module) has not yet detected the crankshaft position sensor during the first second of the cranking of the engine or senses a problem with the pulses in the output with Sensor “A” Bank 1.
P0335 Symptom
- Check Engine Light
- Vehicle may stall/hesitate
- Hard starting vehicle
- Rough running vehicle
- Engine dies
IS EASY TO INSTALL?
yes, because is very easy and quick to repair. generally, it should be installed in 5-6 minutes.
P0335 Causes
- Damaged crankshaft position sensor
- Defective crankshaft position sensor
- Broken timing belt or chain
- Rough running/misfiring engine
- Failed ECM
The difficulty of Diagnosis and Repair
- Use the live scan tool to check that there is an RPM reading when the engine is running.
- Conduct a visual inspection of the crank sensor and connectors and search for signs of fraying/damage to the wiring.
- If no visible damage is found, you can check the CKP 5 Volt square wave pattern. You will have to reference your vehicle’s repair manual to determine which resistance reading is sufficient. This reading will come from the vehicle’s PCM. If you are not familiar with vehicles, it is best to leave this step to a professional.
- If the reading is within the specifications of the vehicle, no need to replace the crankshaft position sensor. However, if the reading is NOT within the specifications of the vehicles, the crankshaft position sensor should be replaced. Replace any frays/damaged wiring and if the reading is within the specifications now, there may be a short in the wiring.
Bruno
Reviewed in the United States on February 19, 2025
Bueno
Julien Cossette
Reviewed in Canada on September 29, 2024
Doesnt fit 2010 Hyundai Accent
Customer
Reviewed in the United States on August 10, 2024
Excelente
Reda
Reviewed in Canada on June 28, 2024
Très bon rapport qualité prix j'ai changer la pièce dans une hyundai elantra 2012 problème résolu sur place
Naomi
Reviewed in the United States on February 4, 2024
I replaced and immediately my vehicle did not want to stay on. I wld press the gas and my vehicle would turn off. So re ordered from rockauto......hopefully that one works
Ali
Reviewed in the United States on February 2, 2024
For the price it’s great. Just installed it in my 2014 Accent and it fixed my issue.
Traci Lane
Reviewed in the United States on November 29, 2024
Car goes into limp mode at 5k rpm. Changed back to Orem sensor and it fixed the problem.
Rafael López Gutiérrez
Reviewed in Mexico on July 5, 2023
Todo bien hasta el momento, lo instale en un Vento 2017
M K E
Reviewed in Canada on February 3, 2023
Ma voiture
Sammy Carini
Reviewed in the United States on October 17, 2023
My car won't go over 3,000 RPM in any gear now that I replaced it, at first my car wouldn't stay started and the RPM gauge would show zero even when it was started. But now that I replaced it I can't go over 3,000 RPM in any gear can someone please help
Customer
Reviewed in the United States on April 22, 2023
It fit and worked perfect
Steph
Reviewed in the United States on April 2, 2023
I took a gamble and bought this cheeper one online…and lost. Car would start but died once you used the gas peddle. I ended up getting it from AutoZone and it works great like it should. You get what you pay for and sometimes these cheeper ones work and sometimes not.
Eric Gagne
Reviewed in Canada on April 14, 2023
The part is easy to install. Prepare a pair of long nose plyers for the removal of previous unit and a 10mm ratchet.
Recommended Products
$99.99
$ 41 .99 $41.99