Your cart is empty.
Your cart is empty.Product Description
TWO INSTALLATION OPTIONS AVAILABLE
INSTALLATION OPTION I
Directly clamp the kickstand to your bike frame using the included clamping plate and rubber pads—ensuring no risk of scratches!
INSTALLATION OPTION II
Directly mount the kickstand under the bottom plate on your bike frame (NOTE that a mounting plate on the bike is needed).
COMPATIBILITY
This centre-mount type kickstand fits wheel sizes between 24" and 29".
The height of the kickstand is adjustable by tightening or loosening the bolt in the middle of the kickstand using the included Allen Key.
MADE TO LAST
Made of premium-quality melt-forged aluminium alloy with a non-slip foot design.
Who are we?
BICYCLE EXPERTS
We design and develop lots of premium bicycle parts and accessories.
WIDE SELECTION
With more than 2000 high-quality and great-value products, you will always find what you need.
SOURCING TOP PRODUCTS
All the products we stock are carefully selected from the factories in the cycling industry.
PRODUCT VIDEOS
Our team strives to add videos for all the products to give our customers an intuitive image of the product and know how to use it before purchasing.
B. Iaco
Reviewed in the United States on March 9, 2025
I bought this kickstand purposefully to have one that mounted on the center, not on some random bar. Immediately, I noticed it didn't fit quite right but just figured I wasn't installing it the way I should've been, so my son tried it as well. We thought we had it on there nice and tight. This past week, he started riding the bike and the kickstand loosened up while he was riding, then would hit the tire. Eventually, my son had to remove it because it had loosened to the point of almost falling off. Quality is disappointingly horrible, and I'm now beyond the return period.
Bubbe and the Beacon
Reviewed in the United States on February 10, 2025
I bought my first adult bike (REI CTY 2.2) and didn't know it would come without a kickstand. This kickstand was the perfect solution without having to return to REI for the addition. It was easy enough to install as I already had the center bracket on the frame, and it holds up the bike no problem. It matches with the hardware perfectly as though it was meant to be there all along.
TomP
Reviewed in the United States on September 4, 2024
I ordered this CyclingDeal adjustable kickstand for an old comfort bike with a standard kickstand, that was always too short. Especially when I went to slightly larger tires and put an electric motor kit on it, the original kickstand just would not hold it up properly.I love how this kickstand is constructed, and it came with everything you need to install it very quickly. Because my bike has a center bracket with mounting hole, I didn't need to use the upper parts of the bracket to install it. Just place the kickstand underneath, put the bolt through, and tighten it. They included 5mm and 6mm Allen wrenches, and I removed my old kickstand with an 8mm Allen wrench. (usually the upper bolt is 6mm or 8mm). The 5mm Allen wrench is for adjusting the height of the kickstand. This new upper bolt can also be tightened with a 13 mm socket, or the small included 13 mm flat wrench.An easy to read instruction sheet with illustrations is included, and to be clear, this kickstand can be installed whether you have a center bracket mounting hole or not. If not, you just use the padded upper part of the bracket to clamp it to the frame.This kickstand is lightweight, but more bulky than a standard kickstand. I was afraid it might interfere with the crank, but there's about a half inch of clearance, so it's fine.Excellent product in my opinion, at very reasonable asking price of only ~$20. ⭐⭐⭐⭐⭐
Koldunya
Reviewed in the United States on September 11, 2024
The stand that came on my bicycle is lackluster. It's basic and it works, but it's basically just a grey iron bar.This installs in place of that, which is nice. Some stands clamp onto the frame itself and can get in the way.This thing is VERY sturdy, and it locks in to where you set it. I'm not worried about it collapsing and dropping my bike at all.I'm recommending this to friends with bicycles, and I'd get another if I had a second bike for some reason.
Arianna Rivera
Reviewed in the United States on November 6, 2024
The quality is good. It works. The knuckle sticks out, not as flush as most types of kickstands. The rubber foot does not sit flush; it rests more on the edge. Not as stable as it could be.
Tomakin
Reviewed in the United States on October 21, 2024
I liked that this included the hardware and Allen wrenches needed for installation and adjustment. The kit accommodates bikes like mine that don’t include an integrated frame mount to support the stand and prevent movement. The kickstand was easy to install and adjust for correct height. It is very sturdy and includes a large rubberized support foot to prevent sliding on pavement. I recommend installing transparent film in the area on the frame where it is mounted to prevent damage to paint. The only negatives are 1. There is a guide groove in the lower support for adjustment that tends to collect road debris like sand and dirt. 2. It is a little heavy. Overall I recommend this kickstand!
Richard Weston
Reviewed in the United States on October 11, 2024
Single screw top allows you to quickly install this center mount kickstand and the adjustable leg will allow you to set the leg to the proper length.The oversized footpad will provide stability on softer surfaces and may even help in loose gravel.The spring is firm and should hold the kickstand in place without any risk of sagging.
Joel P.
Reviewed in the United States on October 10, 2024
When I installed ape-hanger handlebars on my Schwinn, it became top heavy and prone to tipping over. I needed to reduce the lean angle. This kickstand allows very fine adjustments in its length. It's very well made. And the price was right. Problem solved!
Recommended Products