Your cart is empty.
Your cart is empty.Take your home energy efficiency a step higher by using a Dante Universal Log Lighter. The Dante Universal Log Lighter features an energy conserving air/gas mixing chamber for efficient operation and is available in NG (natural gas) or LP (liquid propane.) The innovative air/gas mixing chamber allows for smooth, trouble-free lighting every time and the patent pending design can be easily converted in just minutes for either a straight or 90 degree angle installation.
Art B.
Reviewed in the United States on August 28, 2024
This replaced the previous, that cracked due to bending from constant heat. I can see it is starting to bend a little. But price is reasonable and it is easy to swap, and having to replace every 3-4 years is not terrible.
Michael Gauthier
Reviewed in the United States on April 25, 2023
Easy to replace old log lighter. Works great.
stan
Reviewed in Canada on March 12, 2021
This was a replacement for my existing log lighter that burnt up/melted down after many years of use. It was easy to install and everything fit perfectly.
Teagan
Reviewed in Canada on March 11, 2021
Fit perfect! Works great, direct replacement!
Rick
Reviewed in the United States on February 5, 2021
Only reason for 3 stars is that this unit had a casting problem. The gas chamber was not drilled thus making it not function. After drilling it my self the unit worked as intended. There is really nothing to this. Its just a pipe.
PETS BEATS®
Reviewed in Canada on November 30, 2019
It fits my gas fireplace! Good quality, good functionality!!!
Kevin A.
Reviewed in Canada on April 7, 2019
Easy
The Badger
Reviewed in the United States on November 29, 2018
Solid piece of metal. Definitely get the elbow piece to screw on the end to help support the starting rod. Easy to install, instructions were fairly simple.
DadOfFour
Reviewed in the United States on February 6, 2017
My poor fireplace went over a decade with a gas end cap. Installed this in less than 30 minutes (I prefer being careful when working with flammable gasses). Used gas pipe tape (yellow case, not blue/red packaging- for heat, not water). Installed straight (not angle) - no gas leaks, quite easy... as long as you can turn the original gas end cap. I used a some locking pliers..worked first try. Some good advice: make sure the holes face at a down-angle... as you might be tempted to point UP, but gravity will not be your friend here... ash will fall and clog the holes. Google is great, eh? And again, 5-star product.
BSQuick
Reviewed in the United States on June 19, 2015
The Wife likes to use the fireplace, alot. So much so, that the old pipe finally gave up the ghost. (Questionable if she has pyrolistic tendencies or just a romantic at heart) Installation is easy to attach to the black gas pipe. Comes with two attachment points to all for either 'in line' or perpendicular.
J. P.
Reviewed in the United States on December 5, 2015
Turns out I didn't need the one that could be mounted straight or angled. But since I had purchased it I had to move the plug. Nowhere in the description or on the manufacturer's website did it say the size of the hex key I needed to remove the plug. Turns out a friend of mine owns a machine shop and he had the right size to remove the plug. The description needs this added or else buyer's would have to figure this out themselves. Other than that the product works well..just make sure you open the mixing chamber cover to get the right color flame. Totally closed the flame is orange. I had to open mine about 3/4 to get the proper burning flame. Also, DON'T install with the burner holes facing up. A friend of mine helped me with the install and he was in hurry and installed the pipe with the holes facing virtually straight up. After about two or three fires several of the holes were already clogged with ash. I had to dissemble everything and reattach with the holes pointing not quite straight down. This should hopefully alleviate the chance of ashes clogging up the burner holes.
Janna
Reviewed in the United States on December 23, 2014
I bought a house with a gas fireplace that converts to a natural fireplace. I left this part of the gas fireplace in since it makes starting a fire a no-brainer. I have many natural fires in my fireplace. They get very hot at times. The original gas log lighter first bent in the heat, then broke in half. This one was a perfect fit, easy to install, and seems a bit more solid.
Recommended Products
$785.00
$ 99 .00 $99.00