Your cart is empty.
Your cart is empty.Product Description
DASBET heavy duty fender roller tool is designed to slowly ease the wheel arch away allowing for larger wheels to be fitted. Increase tire to wing clearance, flare arches or repair wheel arch collision damage.
Product Details
Adjustable Arm
With the big T handle, you could adjust tension and push the roller back and forth by hand spinning the rotor and hub assembly.
Adjustable Knob
Simply screw the knob to adjust the span length of fender tool.
Fixed Chassis
Fixed and stable, easy to face variety of needs and is the perfect choice for your vehicle fender repairing.
Roller Wheel
Equipped with adjustable arm allows this fender roller for 180 degrees wheel swivel.
DASBET Heavy Duty Fender Roller Tool
Product Features
- Adjustable knob: This wheel arch roller can lock onto wheel mounts, fits most cars and light trucks with 4 and 5 lugs.
- Thickened base: The body is made of iron which possesses of excellent hardness. This fender roller is easy to face variety of needs and is the perfect choice for your vehicle fender repairing.
- Increase the clearance between the tire and the fender to fit larger tires.
- Useful for repairing the dent or damage of the fender.
- Attached hitch pin allows for wide or narrow angle.
Wide Applicability
This wheel arch roller can lock onto wheel mounts, with elongated holes in the adapter plate to fit all popular 4 and 5 bolt hubs adjusts from 21" to 25.5". It fits most cars and light trucks.
Customer
Reviewed in the United States on August 19, 2024
I was worry about getting this roller as there's many reviews saying it's not worth it. I got to say, I'm actually happy that I decided to test my luck as it ended up working for me. I was able to do both side of my car. The hub piece was big enough for my bolt pattern (4x100) and lug studs (12x1.5). Maybe it was my luck, but I would recommend it to the weekend DIY'er. 99 Toyota Corolla
Y
Reviewed in Canada on March 24, 2024
So much wrong with it…1. So much loose play.2. Adjuster threads completely stripped on me in the middle of rolling a fender, and now the tool is completely useless.3. The roller wheel diameter is too wide, doesn’t roll properly. Too much friction against the wheel and the bracket holding it.4. Washers and such don’t fit properly. Needed to cut them to make them fit.Will be buying an EASTWOOD one now, none of this garbage ever again.
Brad
Reviewed in the United States on October 11, 2024
Worked
JG
Reviewed in the United States on January 9, 2024
The design and components seem slightly poorly designed for good control and positioning in the wheel well. I had to drill and move one of the pivot points to get it to even be usable on my 2002 Civic. It seems the main arm is overly long such that it barely can be adjusted short enough for my use, and I don't think anyone rolling fenders uas any as long as it would reach.It can be made to function, but if you have need or want to use on more than a single car, probably buy better unit.
Sean
Reviewed in Canada on April 7, 2024
Was using the tool and it works great but when I put more pressure on it. The locking nut came off 2 separate tines.
Alex L.
Reviewed in Canada on May 8, 2023
The initial quality is very cheap. I had to buy washers to shim all the loose before even start to use it. I managed to roll 2 rear fenders and the center screw decided to strip. Now the front wheels are needed too but my tool is useless. Poor weldings too. Dont waste your money on this and do yourself a favor ; buy the eastwood fender roller!
RK HomeWorks
Reviewed in the United States on November 26, 2023
This was the lowest priced Fender rolling tool at the time of purchase, virtually all of these are the same unit...some painted red, some blue. I've used it only once, it works. I had to modify (grind) a section of the roller to clear the brake caliper, this may not be an issue on your application. Though if you're to the point of rolling your fenders certainly you can understand and manage modifying a tool to serve your purpose.
Thomas Parak
Reviewed in Canada on February 26, 2022
Trust the reviews. Cheap quality. Did not work for what I needed. Holes for wheel studs are too small.
Johnny
Reviewed in the United States on December 12, 2022
If you just want a cheap fender roller to use here and their this is an option but if you’re using it consistently it’s a no go. Welds are amateur, a bit difficult to set up, and you have to know your stud pattern to make sure it works with your vehicle. I can come confirm that it fits a 5x114.3 for a g35 Infiniti.Would I buy this again no.
Calvin Beal
Reviewed in the United States on October 27, 2022
The product does not fit on the studs of my Chrysler 300 5X115 studs
chris
Reviewed in the United States on October 22, 2022
This clearly wasn’t setup in a jig prior to welding. Quality is cheap all the way around, but that’s to be expected for the price. This is a “use for a car or two” and then throw it away tool at this price, but the complete misalignment of important pieces is unforgivable given how easy the jig setup must be. Like so many other reviews state: don’t waste your time.
Hurtqwake
Reviewed in Canada on January 7, 2022
good quality toolfast shipping
Travis F
Reviewed in the United States on September 8, 2021
The product was just thrown into a box with some pieces. The instructions have a picture but the names of the items are very clearly not labeled right so it makes it confusing to put together. There’s several parts missing but several unneeded parts. The slotted holes are cut/drilled very badly. The paint was just slapped on with a lot of bare metal. Just a terrible product. Don’t waste your money.
Recommended Products