Your cart is empty.
Your cart is empty.
1, Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 6 Channels output, each channel maximum output current 3 Amps (Factory-installed fuse value 3 Amps, you can replace the fuse to support up to 10 Amps.)
2, Input terminals pitch 7.62mm/0.3", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules.
3, Output terminals pitch 5.0mm/0.197", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw.
4, Fuse holders for Medium Blade ATO/ATC Fuse, the fuse can be removed and replaced very easily. With fuse fail indication function, when you connected load and the fuse has blown or has been unplugged, fail indication LED will turn on.
5, FR-4 fiberglass dual copper layers PCB. High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm rail.
wyatt boche
Reviewed in the United States on February 16, 2025
This was what I was looking for, for DC fuse block for my square drop camper build.
Engineer
Reviewed in Canada on January 3, 2025
Great product and the quality was good. The price was just right. would purchase from the seller again
Dean Livingston
Reviewed in the United States on September 21, 2024
I used this for 5vdc distribution block and it worked better than expected.
Customer
Reviewed in the United States on May 13, 2024
Great price and just what I needed
Julie
Reviewed in the United States on February 25, 2024
Great for a 12 volt camera system setup. I should have gone POE, but I bought my cameras before that was readily available, so I had to wire my house with 12 volts. I like the individual fuses, as it protects any wiring from arcing or damage in the attic. I added a few higher rated fuses, and am able to run 12 volt stuff all over the house without those stupid "wall warts" too, so that's a major plus. The DIN rail connector makes it really easy to install.I have a few other products made by this company, and they're all very good.I would highly recommend this product.
John Black
Reviewed in the United States on October 31, 2024
Good product
G. Anderson
Reviewed in the United States on July 10, 2022
This is a great way to add fused distribution to a project if don't want to mess with more sun rail parts or you don't have any din rail. I used it in a sculptors wooden base to distribute power to led lamps.
b.deren
Reviewed in the United States on February 4, 2022
I use it with a lot of DIY projects. Standard automotive breakers are easy to replace as needed. LED lights up when a breaker "blows" which is super easy to troubleshoot/identify.Do note that the LED will light up if the breaker is blown ONLY when there is a load connected to the terminal.
McChuck
Reviewed in the United States on June 16, 2021
Port 1 does not work. Port 2 through 12 do work. If I pull the fuse on port 1, there is still voltage present. No sure what the issue is. Also if I add a 12v load on port 1. The voltage drops to 4v.
Recommended Products
