Your cart is empty.
Your cart is empty.With the 23 Piece Combination Socket Set, you can be sure you have the right tool for the job. The socket set metric and standard includes a variety of sockets and accessories for your convenience. The metric sockets include DirectTorque technology to help prevent rounding of fasteners and to provide better grip.
Denny
Reviewed in the United States on September 20, 2024
I wanted 6 point sockets , most of my Craftsman sockets are 12 point and they can slip and round the corners of a very tight bolt. This set is exactly what I wanted and is of great quality ! I think it's an exceptional deal for what you get.Great set of sockets !
Robert Coleman III
Reviewed in the United States on December 15, 2024
The media could not be loaded.
Kevin Crowe
Reviewed in the United States on November 19, 2024
I needed a shallow 6 point 1/2 drive 21mm socket for my lawnmowers PTO shaft, where a 12 point I had would keep slipping and even an impact 6 point deep would slip off. Instead of a single socket I saw this set on sale and decided to get it as I didn't have a 6 point 1/2 drive set anyway (the old Stanley mechanics set I have has everything but 1/2 6 points!) The 21mm did its job and defeated the loctited PTO shaft with a breaker bar/extended ratchet.Overall this is a nice set, I like the fact that the tray can be removed and placed in a toolbox drawer without the case, and compared to some of the similar smaller drive kits from DeWalt, this tray doesn't appear to have as much wasted space.
Dario Soto
Reviewed in Mexico on January 20, 2024
Parece que son importados, no me gusta decirlo, pero si se nota la diferencia de los productos que se venden en Mexico contra los que se ofrecen en EUA
MPD
Reviewed in Germany on April 23, 2024
Nice tools
m2hb
Reviewed in the United States on April 1, 2024
I put my calipers to the sockets and they all measured to within 0.005" to 0.010" of the marked socket size, which is comparable to what I've measured for other sockets from Ares, Koken, Stanley, Kobalt, and Craftsman. All of the chrome is smooth and well-finished. The knurled beauty rings on the sockets maybe add a little bit of extra grip, but I suppose it's better than no extra grip. My Kobalt 337309 1/2" drive ratchet has 90 teeth vs the DeWalt's 72 teeth, but the Kobalt's head is also huge. The engraved sizes on the sockets are easily readable, which is nice. The ratchet held on to all of the sockets and the extension bar securely. The release button and the lever to switch drive direction work smoothly. I haven't had to really crank on the ratchet with a huge amount of torque to remove some stuck nut, but it's worked well so far on simple tasks like removing 17mm oil drain plugs.
Customer
Reviewed in the United States on November 19, 2023
I've been using this socket set as part of a "On the Road" tool kit that I always have with me. They come in handy often and so far haven't let me down. The Plastic case is sturdy enough to bang around without getting damaged and keeps all the parts together. For under $30 you can't do better.
Navaf
Reviewed in the United Arab Emirates on October 5, 2023
Solid Matirial and quality no compromise
Eduardo José Rodrigues da Silva
Reviewed in Brazil on April 19, 2023
Valeu cada centavo, uma bela ferramenta
LEEZA
Reviewed in Canada on July 9, 2020
It’s a really sturdy and strong kit. My husband loves it and uses it for Oil Change for his Jeep. Highly recommended. Nice addition to toolset
DawnHawk
Reviewed in the United States on May 17, 2020
I've resisted buying Dewalt tools since B&D bought the name and stopped making the wonderful Dewalt radial arm saws. Radial arm saws were a mainstay of the home and professional workshop back in the latter part of the 20th century and deservedly so. Now you have to have a table saw AND a miter saw to replace it, and they can't do half as much, half as well as a good Dewalt radial arm saw. I suppose B&D wanted the name to revive the waning reputation of B&D at the time. It certainly worked. Most, but not all DeWALT tools are quite good from what I've seen, though they tend to be over-priced for what you get.Lamenting aside. I had purchased a set of Hyper-Tough sockets from you-know-where and was pretty happy with them as they were dirt cheap and looked great. But, then I read a few reviews where people claimed the ratchet had failed. A set isn't much good without a ratchet. Someone gave me a $15 gift card and that was sufficient to upgrade to the DeWALT set, which admittedly has a better reputation. The DeWALT has two more sockets, a longer extension, and a very useful drill drive converter. It has a very nice case which is supposed to be impact resistant, but I have my doubts--The hinge looks a little delicate. The standard blow-mold case might be more durable but not as pretty. Pretty is important as I look at my automotive tools more than I use them--I'm more of a carpenter these days. The Hyper-Tough didn't have a case but more of a holder that didn't hold the ratchet very firmly. In general I'd recommend the Dewalt unless you are quite strapped for funds.
mbj
Reviewed in the United States on February 19, 2016
I was looking for a DIY quality 1/2" drive SAE and metric socket set. As 1/2” drive is a larger ratchet, I wanted 6-point over 12-point sockets (something one can apply more torque to). This fits the bill nicely. The ratchet is 72-tooth, strong and solid and has a smooth action and nice hand-feel. It’s got a good selection of shallow sockets that lean to the larger end compared to some other sets. This was another selling point for me. (If I need to use a smaller socket, I would probably grab a 3/8” drive.) The sockets have relatively big easy to read numbers. The extension, drill adapter and case were a bonus.The case has some thoughtful features like a removable tray for use in a tool chest drawer and the ability to click-lock onto accessory cases.Since the description is lacking, here is what’s included + some photos:Dewalt DWMT73813 23 Piece 1/2" Drive Socket Set1 -Lockable stacking case with transparent lid and removable internal tray1 - 1/2" drive 72-tooth quick release ratchet10 - 1/2" drive 6-point SAE sockets: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1"10 - 1/2" drive 6-point metric sockets: 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm1 - 1/2" drive 5" extension1 – 1/2" drive drill adapterIf you want a set of 1/2" drive deep sockets to go with these, search Dewalt DWMT73814 for SAE and DWMT73815 for metric.A year and a half later, I'm still loving these I've used these for some heavy torque / breaker bar jobs including suspension work on my Jeep and car. They're holding up great. I recently bought both the metric and SAE deep sockets to go with it. An absolutely great value.
Recommended Products
$128.99
$ 57 .99 $57.99