Your cart is empty.
Your cart is empty.Product Description
This inflator requires an air compressor to use.
Rob
Reviewed in the United States on March 5, 2025
Easy to use. Works as it should. Appears to be well made.
Ed A.
Reviewed in the United States on February 11, 2025
So far works well and appears accurate.
James
Reviewed in the United States on January 5, 2025
We bike thus have presta valves (the “skinny” kind vs what’s on car tires), and this thing doesn’t grab onto them at all. Unfortunately, like every “dual mode” pump out there that is supposed to work on both valve types, it doesn’t work for presta although it’s decent for Schraeder (fatter ones your car has). I hoped it was different, but alas. I wish I had returned it. Sometimes I get it jammed on just right, but mostly I keep fiddling with it in a state of increasing rage for 20 minutes and then turning to hand pump. It’s not even worth having a compressor if this is the tool you put on the end of it. I finally sucked it up and got the Park one: it’s crazy expensive but is truly wonderful if you have a few bikes with tubeless setups.
Grandpa
Reviewed in the United States on January 30, 2025
The tire inflator came packaged well. I used it to inflate a low bicycle tire and it worked well with that type valve. It does not come with instructions on how to read the guage which caused me a little concern since when the handle is pushed to inflate there is one number on the read out and when you release it there is another number. i think I have it figured out but an instruction sheet clarifying how to read the guage would have been helpful.
Tracy Marshall
Reviewed in the United States on January 21, 2025
Great instructions are included and even a bit humorous when describing the process of seating a tubeless tire. Seems well built and comes with everything you need and some extra presta valves and caps. Time will tell and hopefully I won’t need to use the warranty that covers it for a year.
Alex
Reviewed in Canada on August 20, 2024
I rarely leave reviews, however, this one hit the mark. It came with quality energizer batteries and hooked up to my compressor without any modifications. The inflator seals well on my bike (presta), as well as shocks and car (schrader). The extra presta valves and aluminum caps fixed my two main issues with loosing air (bad seal and plastic caps falling off). The rubber protector for the gauge is a nice touch, build quality feels good, it should last a long time.If I had gone out and purchased each item individually, I would have been looking at double the price. Overall this is a great product that does exactly what I need.
Richard Nixon
Reviewed in the United States on May 22, 2024
I was struggling to get my tubeless tires to re-seat with my manual air pump, and I already have an air compressor so I started shopping for a connector for it. There are many that were not so highly rated, and not wanting to donate a kidney for Park Tool, I landed on this one. I think for the price it is worth 5 stars, it did apply the air fast enough to get the tire reseated.There are some quirks with how it works - first of all the LED display will only turn on with a button push, which makes it tough to use for precise inflation. Also, you do have to push hard (harder than you'd think) to get it to connect fully to the skinny presta valve.I have not tested on car tires but I assume this would work fine for that as well. EDIT - WILL NOT WORK FOR CAR TIRES. It is a fail, just will not stay on. Still works great for bikes, but would not work for car tires.
Scott Allen
Reviewed in the United States on December 30, 2024
I have been using this product for over a month, and it makes airing up my bike tires so much easier. With just the press of a button, I can add air, automatically check the pressure, add more air, or release some air by pressing another button. I don't have to worry about adaptors for use with Presta valves.With some pumps, Presta valve connectors can be hard to work with, but I have never had an issue getting this one to seal or depress the valve stem. If I want to use it for my car tires, all I have to do is unscrew it and reverse the insert. I love it!
Laurel Brewster
Reviewed in Canada on December 27, 2024
When I bought this I was convinced by the reviews that I would have to replace the valve head with an alternate unit. Many reviews say the head does not engage properly with presta valve stems. However, it worked perfectly right out of the box and seals perfectly every time. Very happy. I use this pump at least twice a week for both a mountain bike (low pressure) and a commuter bike (70-120psi). I think that some of the disappointed reviewers might not fully understand how presta valves work. In particular the nut at the top of the valve stem that you have to unscrew before attaching the pump. Whatever the case I'm happy to say my experience has been positive. Have been using for several months.
Mark Wilkinson
Reviewed in Australia on January 31, 2024
Very happy with this tool. The digital pressure gauge turns on automatically when connected to an inflated tyre and reads quite accurately. The valve attachment clamps onto the valves quite well on both Presta and Schrader types. Note that in Australia you will probably need to change the male coupling that attaches the inflator to your air hose to a Nitto type and put some sealing tape around the thread, which is easily done.
Cendrato Nata
Reviewed in Australia on April 12, 2024
As a describe
Mellow Sparky
Reviewed in the United States on December 10, 2023
I purchased this inflator to use with my compressor to rapidly set the bead and fill tubeless bike tires. The inflator seems to be well made and has a pretty easy to read pressure gauge. Overall, if you are someone that is going to install a couple tubeless tires every year or so - this will work. It will annoy you a bit, but it will work. If you are going to do more tires per year or if you have a bike shop - this is NOT what you are looking for. Here's the things to be aware of:- The "universal valve head" will NOT lock on to a Presta valve that has had the core removed. I prefer to do the initial inflation with the core out (after filling with sealant), because it fills and locks the bead very fast. To use this inflator, you need to put the core back in first. It will work that way - just not my preferred method.- In order to lock the head onto the valve you need to push down very hard. I mean really hard. (even the directions say this). If you don't, it won't lock on and inflate.- While you are inflating, the pressure gauge is all over the map. Once you stop inflating it takes a moment or two and the gauge settles down and reads the pressure. I didn't calibrate it - but it looks like it is in the right ballpark.Bottomline - this inflator works. But it's quirky to use. I probably would have ponyed up for something higher quality if I were doing it again. Not worth returning though - I'll live with it until it breaks. Hope this helps some of you.
Deathnovan
Reviewed in Mexico on October 6, 2022
Es una excelente herramienta, no le pongo 5 estrellas porqué la cabeza para las valvulas podría ser de mejor calidad.
Recommended Products