Shopping Cart

Your cart is empty.

Your cart is empty.

Digital Satellite Finder, LCD screen Satellite detection Satellite measuring device strength Dish Sat with built in alarm buzzer

4.6 (2) Write Review
Free shipping on orders over $29.99

$19.99

$ 9 .99 $9.99

In Stock
  • With a blue backlight, you can use this digital satellite finder at night.
  • This professional digital satellite finder is much more accurate than any other meter in its class.
  • The meter does not need to be recalibrated or complicated programming.
  • Use LCD screen to display the satellite .
  • Built-in alert buzzer. Buzzer and attenuation control function.


Product Description

satellite finder satellite signal finder satellite tv dish satellite finders

satellite finder signal meter signal meter antenna signal meter satellite signal meter cable tv
  • Dimension: 13 * 6.5 * 2.7cm / 5.12 * 2.56 * 1.06inch
  • Package Weight: 145g

  1. With a blue backlight, you can use this digital satellite finder at night.
  2. This professional digital satellite finder is much more accurate than any other meter in its class.
  3. The signal meter does not need to be recalibrated or complicated programming.
  4. Use LCD screen to display the satellite signal intensity.
  5. Built-in signal alert buzzer. Buzzer and attenuation control function.
Frequency Range: 950-2150MHz
Input Level Range: -40 ~ -10dBm
Impedance: 75Ω
Gain: ≥10 dB
Power Supply: 13-18V DC
Operating Temperature: 0 ~ 40℃

How to use the star finder:

  • 1. Connect one side of the star finder marked "Satellite" to the antenna tuner, connect the other side marked "Receiver" to the receiver, and turn on the receiver and TV.
  • 2. After the receiver is turned on, the voltage supplied by the receiver is 13-18V. Check that the star finder screen is on. If the light is on, the star finder is working normally.
  • 3. Set the data of the satellite to be received (including LO frequency, downlink frequency, symbol rate, polarization, etc.) in the receiver and turn it on to the signal strength and signal quality cursor status.
  • 4. Adjust the knob on the side of the star finder counterclockwise to the maximum (otherwise, the signal will always be 0%).
  • 5. Adjust the azimuth and elevation of the antenna. When the LCD displays 99%, adjust the side knob to attenuate part of the received signal, and then adjust the azimuth, elevation and LNB polarization angle of the antenna several times until the signal no longer increases.
  • 6. Judge whether the signal is the required satellite signal in combination with the satellite receiver. If yes, remove the star finder and reconnect the receiver with LNB; If the received signal is not the required star signal, repeat the above work.

sat finder satellite finders fta satellite audio meter dr. meter antenna signal finder birddog meter

antenna signal finder birddog meter brainydeal camera signal finder

digital sat meter for repoint digital satellite digital satellite detector digital satellite finder

data digital signal finder digital sat finder meter for dish network digital sat meter for network


larry gibson
Reviewed in the United States on September 14, 2024
I liked the way it performed.
Darla
Reviewed in the United States on May 26, 2021
Easy to use!