Your cart is empty.
Your cart is empty.Product Description
Digital Tachometer RPM Meter Induction Pulse Tachometer Hour Meter Tach Gauge for Chainsaw Lawnmowers Gasoline Engine
This digital tachometer rpm meter works for most types of gasoline engines, 2 stroke or 4 stroke gas engines, such as outdoor power equipment, generators, agriculture, construction machinery, vehicles, boats, Marine, etc...
Small Engine Hour Meter, Digital Tachometer
LCD Screen Display
Low-voltage design, built-in battery supply, inductive design, safe and reliable.
Multiple Measurement Methods
After installing one end of the electronic wire on the electronic watch casing, clamp the clip on the spark plug wire sheath for induction measurement; The electronic wire can be bundled onto the spark plug wire sheath for several turns to induce measurement; Measure at a distance of 3 centimeters to 5 centimeters near the spark plug wire sheath using a handheld tachometer.
Specification
- Model: GCJ-01
- Type: Digital Tachometer
- Measuring range: 100-30000
- Measurement accuracy: 1%
- Resolution: 100%
- Timing: in units of minutes
- Power supply: battery
- Can be shut down and cleared
How to Use
*1. RPM Meter mode setting: Hold the (SET) key, and the screen will display 01, 02, 03, 04 in sequence; (Screens 01, 02, 03 display the speed modes corresponding to various engine strokes). The factory default value is 02 mode. Release the button and the display will flash for 3 to 5 seconds. After stopping, confirm the activation of the RPM meter mode and start the measurement.
*2. Shutdown: Hold the (SET) key, and the screen will display 01, 02, 03, 04 in sequence; When the screen displays 04, it flashes for 3 to 5 seconds and stops. Confirm to start the system reset mode, and simultaneously press and hold the (MODE) and (SET) keys until the full screen is displayed (the recorded working time and speed data are reset).
*3. Long press and hold the (MODE) key to view historical data.
How to Use
*1. RPM Meter mode setting: Hold the (SET) key, and the screen will display 01, 02, 03, 04 in sequence; (Screens 01, 02, 03 display the speed modes corresponding to various engine strokes). The factory default value is 02 mode. Release the button and the display will flash for 3 to 5 seconds. After stopping, confirm the activation of the RPM meter mode and start the measurement.
*2. Shutdown: Hold the (SET) key, and the screen will display 01, 02, 03, 04 in sequence; When the screen displays 04, it flashes for 3 to 5 seconds and stops. Confirm to start the system reset mode, and simultaneously press and hold the (MODE) and (SET) keys until the full screen is displayed (the recorded working time and speed data are reset).
*3. Long press and hold the (MODE) key to view historical data.
How to Use
*1. RPM Meter mode setting: Hold the (SET) key, and the screen will display 01, 02, 03, 04 in sequence; (Screens 01, 02, 03 display the speed modes corresponding to various engine strokes). The factory default value is 02 mode. Release the button and the display will flash for 3 to 5 seconds. After stopping, confirm the activation of the RPM meter mode and start the measurement.
*2. Shutdown: Hold the (SET) key, and the screen will display 01, 02, 03, 04 in sequence; When the screen displays 04, it flashes for 3 to 5 seconds and stops. Confirm to start the system reset mode, and simultaneously press and hold the (MODE) and (SET) keys until the full screen is displayed (the recorded working time and speed data are reset).
*3. Long press and hold the (MODE) key to view historical data.
Energy Saving and Electricity Saving Convenience and Practicality
After the gasoline engine is not working, the digital tachometer automatically saves energy and electricity, and automatically turns off the display; The tachometer automatically starts the test when the gasoline engine is working. Timing range: 1 minute to 99999 minutes.
Wide Application
This small engine hour meter digital tachometer is used for measuring the RPM of up to 8 cylinders in 2-stroke or 4-stroke fuel or gasoline engines, accumulating engine working time, and other unique functional designs. The digital hour meter tachometer is suitable for gasoline (engine, chainsaw, lawn mower, glider, motorcycle, car, go-kart, engineering vehicle, snowmobile, beach bike, motorboat, grinder, generator, vibration machine) mechanical equipment, etc.
Walter Duarte
Reviewed in the United States on May 4, 2024
Does not read peak rpm well - it’s way off
Mike
Reviewed in the United States on May 31, 2024
Needed this to adjust my weed eater and other small gas powered yard equipment. Worked great.
Richard Parenteau
Reviewed in the United States on May 10, 2024
I wish I could comment on how good this item is but I received this with a cracked len
J A.
Reviewed in the United States on October 5, 2024
Product is not as advertised
Indiana Doug
Reviewed in the United States on October 28, 2024
I use these for all my small engine repairs, especially chainsaws. I mount them on my chainsaw racers as well. The gold standard👍🏻
David Loyd Poisel
Reviewed in the United States on January 26, 2024
Worked perfectly 1st time.
Nasario Cano
Reviewed in the United States on January 13, 2024
does the job
adam jakubowski
Reviewed in the United States on January 13, 2024
10
Recommended Products
$32.99
$ 15 .99 $15.99