Your cart is empty.
Your cart is empty. Specifications:
Measurement range: DC: 0.000-33.000V
Display color: red
Refresh rate: 5 times per second
Measurement accuracy: ±0.3‰
Supply voltage: DC: 4-30V
Working temperature: -10°C~65°C
Dimensions: 48mm*29mm*22mm
Opening size: 45mm*26mm
Package include:
1pcs 5-digits Voltmeter
Gerald W Rousseau
Reviewed in the United States on September 25, 2024
The meter was exactly what I needed to complete a high power analog power supply.
Wes
Reviewed in the United States on September 23, 2024
A much more accurate display of battery voltage. Three decimal places is very useful in tracking the visual change rate between 13.2 and 13.0 volts
Terrence Angst
Reviewed in the United States on May 18, 2024
Accurate and easy to view.
ernest h. key
Reviewed in the United States on March 8, 2024
didn't need the numbers to the right of the decimal point so I covered them up with electricians tape.01-27-2025 The volt meter has quit!! The numbers are all over the place. The decimal point moves around.Ordering from another manufacture hoping It will last
Stephen Schiller
Reviewed in the United States on November 20, 2024
So if I want to measure the output of a sensor with this meter that is remotely located, there is no way to easily eliminate the voltage drop across the ground wire to the sensor. Fortunately it was below a threshold that made it barely OK. Otherwise works great.
Scoobis
Reviewed in the United States on June 6, 2023
TL;DR - Accuracy is much greater than the spec. The display is bright. The documentation is in Chinese but has been translated below. good bang for the buck.Details:the meter came boxed in a hard plastic case to protect it.See attached images so the packaging and instructions.the instructions are in Chinese but it is pretty easy to figure out.AccuracyI found it to be only 4.8mv off at 7.7000V which is 0.06234% error ratethis exceeds its spec of +/- 0.3%the test was done with a 120000 count meter that is in calibration.current requirements.I found it to pull 24ma at 7.7v I did not do current tests at other supply voltages but I did test the advertised supply range with no issues.specs:DC BidirectionalVoltmeter DC Bidirectional VoltmeterWorking voltage: DC 4~28V (5~12V recommended)Measuring range: DC -33.00~+33.000VAccuracy: +/- 0.3%Definition of lead wires:Red wire (Red): VCC~instrument working power positive poleBlack wire (Black): GND~common negative pole Yellowwire (Yellow) V++~measurement power supply positive poleLead Length:145mmProduct Size: 47.6x28.7x20mmInstallation hole: 45.2×26.0mmPackage size: 52×68×24mmproduct weight: 30g (including package)I hope you found this helpful
Recommended Products
