Your cart is empty.
Your cart is empty.Product Description
Touch Control Board with Digital LED Display
Touch Control Sonic Cleaner has the following features:
1. More sensitive: Just put your finger on the button, no force required.
2. More durable: The touch control switch will have a longer service life.
3. Waterproof and wear-resistant: Made of wear-resistant materials to reduce friction damage.
Multiplue Modes for Different Cleaning Purposes
FULLWAVE mode(40KHz) for intensive rinse of blind holes or complicated surfaces; SEMIWAVE mode (semiwave based on 40KHz, i.e. 33KHz) for rough surface cleaning; DEGAS mode for removing ultrasonic fatigue so as to improve cleaning effect; POWER SWEEP mode for dynamic rinse of stubborn stains.
Silica Gel to Reduce Noise
Heating can decrease the adhesive strength of oil and wax to certain stuffs to be cleaned, make the cleaning solution much easiler to create cavitations under ultrasonic wave and strengthen cavitation so as to increase the cavitation level of cleaning solution, and then enhance the cleaning effect.
SUS304 Die-casting Tank and Drain Valve
The cleaning tank and drain valve are made with SUS304 stainless steel. SUS304 stainless steel does better in resistance to weak acid or weak alkali solution. However, SUS304 stainless steel materials has no resistance to strong acid or strong alkalis solution, such as hydrochloric acid.
d'Artagnon'smom
Reviewed in the United States on March 29, 2025
Love this little device. I am a cosmetic chemist, which requires me to make a number of plant-based extracts. This is a wonderful tool for disrupting cell membranes, getting the last drop of goodness from extractions. Make sure to use good glassware, as I had a lesser beaker, get cracked in the process. Best to stick with the heavy-duty Pyrex stuff.
Marc S.
Reviewed in Canada on September 28, 2024
The de-gas and power sweep are great for pcb’s. Not very noisy.
joel ruprecht
Reviewed in the United States on February 26, 2024
This little guy is pretty impressive. I like that you can heat the tank before starting the cleaning cycle, it really makes a difference in cleaning effectiveness. Three different cleaning modes seem to tear through dirt and buildup. I primarily use it to clean firearms and parts, it does a great job of unlocking carbon locked parts, breaking up deposits on suppressors, etc. Some scrubbing/scrapping is still required after cleaning cycle, but for the most part, it does a great job.This particular model does not have a drain. I can definitely see how that would make things easier when it comes to emptying the tank to switch between solutions and avoid potential water damage to the unit while doing so. It’s not quiet. It’s also not horrific. It does make my hearing aid freak out though.Overall, I’d probably go up a model to get the drain, but I would recommend this brand.
Alberto G.
Reviewed in Italy on August 15, 2023
Non sono un esperto di lavatrici ad ultrasuoni tuttavia ho provato ad usarla con orologi di buon livello con cinturini in titanio e in acciaio vetro zaffiro etc collane d'argento e perfino un vecchio apriscatole (per vasi grandi) ed è uscito tutto come nuovo con acqua 40 gradi e un po' di Black cleaner
Marvin
Reviewed in the United States on May 7, 2023
The only downside I found for this unit is the extremely small font used in the included "manual"/information sheet making it almost entirely unreadable. Plus I was not able to find recommended minimum/maximum water levels marked on the tank. I downloaded the online general manual for all of these units and found this statement under Safety Precautions: "DO NOT operate the unit without fluid in the tank. Always ensure that the fluid is no higher than the max mark and no lower than the minimum depth of 7cm."My first use of this device for baffle cleaning was fairly successful. Overall, I have been manually scrubbing the removable baffles using CLR (works better than Simple Green) taking quite some time and aggravation to get them very clean.The suppressor (with removable baffles) to be cleaned had 400+ rounds of .22LR, 300BLK subs and 300BLK supers through it and was dirty and carbon fouled.I purchased this unit to hopefully make the cleaning process much easier- and it did do that. I performed an initial cleaning test with two baffles each using a plastic baggie 1/3-full of a soapy water mixture, then 100% Simple Green and finally CLR.CLR has proven to work better for manual carbon cleaning. Using this ultrasonic unit for an initial test of 15 min. each with water temperature at room temperature and using Power Sweep mode- CLR was still a better cleaning option of these three materials.Finally I placed all eight baffles into a 1-quart Zip Lock baggie- 1/2 filled with CLR and placed into the ultrasonic's basket sitting in water filled 3/4 of the way to the top of the tank. After 60 minutes runtime (maximum OEM recommended time) I removed all baffles and scrubbed the remaining carbon from the baffles using a bronze bristled brush. The carbon that was left after the ultrasonic completed its 60 minute cycle was fairly easy to remove, as it has been softened greatly.Next time I might try a 60 minute cycle and then a 30-minute cycle, which I suspect would work even better. I did not find this 4L ultrasonic unit to be very loud with the lid in place or removed while in use in my workshop building, unlike what someone else mentioned in the reviews.
Cliente
Reviewed in Spain on February 21, 2023
Cumple expectativas profesionales
Brian Chambers
Reviewed in the United Kingdom on December 3, 2023
Very good quality at a good price, very easy to use a nice size for carburettors and similar items and works a treat.
Jeff
Reviewed in Canada on November 18, 2022
The product arrived on time. This cleaner is very quiet, I was expecting the worst as normally ultrasonic cleaners are known for their noise. I specifically bought it because it was advertised as quiet - no exaggeration by the DK Sonic. This unit is so quiet I can work beside it without distraction or annoyance. The unit heats the water in 30 - 60 minutes depending on how hot. I was able to raise tap water up from 25C to 50C in about 30 min. Well insulated, the outside skin stays at room temp while the water is hot. Tried a few small cleanings (a ring, piece of dirty, greasy plastic) and it obviously works as you can see the dirt particles begin to collect on the bottom of the tank. Easy to clean out after, just drain the water and wipe the inside with a rag. The stainless interior cleans very easy. A little pricier than the other brands but well worth it, looks and feels very sturdy. The control area is a true touch pad and has no physical buttons or membrane switches, just the very lightest touch to activate. Programming is fairly straight forward and adapts to how you activate the buttons, it will advance the settings by large or small amounts all based on the length of time you delay between each touch. Takes a minute to get used to but after that makes setup very quick.
Lee Neely
Reviewed in the United States on October 30, 2021
We own a small engine repair shop and purchased the 15L for carburetors and other parts. This unit works so well, we plan on purchasing a smaller one for 2cycle carbs and smaller jobs. The unit is relatively quiet, and the large touch is very easy to control. It heats very well, and is quite insulated. After shutting the unit off, the water is still in the 90’s the next day! (as long as you put the lid on.). The temperature is accurate, and within 1 degree. (Checked and monitored with our Fluke thermometer.) Once the temperature is reached, the heater shuts off and turns back on as necessary to keep it at the desired setting. We found that the water usually only gets hotter as you run the unit from the heat of the electronics or perhaps the ultrasonic effects? But usually increases a degree or two. It has a cooling fan in the bottom as the electronics do generate some heat. We have put several carburetors through the unit so far, and we are impressed! The pictured carburetor is off of a snowblower and hadn’t been used in several seasons. After a 30 minute cycle of full wave, and an additional 10 minute on sweep, with water temperature at 150C, the results are impressive! Whats even more impressive? We have been using just water! We did try another carb with some dawn dish soap to experiment, but results have been remarkable. As another experiment, we took some air filters from Husqvarna chainsaws and put them through the half wave cycle. After just 5 minutes those things came out looking like new! We have also done a couple spark arrestor screens, and even tried a fowled spark plug. It actually done really well. As for the longevity of this unit, time will tell. But it does seem built quite well, and comes packaged very well also. So far we are impressed, and the unit is paying for itself.
Recommended Products
$59.99
$ 31 .99 $31.99