Your cart is empty.
Your cart is empty.Product Description
Features
Encoded Control with Precise Indicating Columns
High-precision Encoded Control with value indicating columns: 13 Precise Time Settings within 60 minutes (i.e. 1, 2, 3, 4, 5,10, 15, 20, 25, 30, 40, 50, 60 Mins) or Always ON; 14 Precise Temperature Settings within 80℃ ( i.e. 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65,70, 75, 80℃ ).
Multiplue Modes for Different Cleaning Purposes
FULLWAVE mode(40KHz) for intensive rinse of blind holes or complicated surfaces; SEMIWAVE mode (semiwave based on 40KHz, i.e. 33KHz) for rough surface cleaning; DEGAS mode for removing ultrasonic fatigue so as to improve cleaning effect; PULSE mode for dynamic rinse of stubborn stains.
Heating Function for Removing Oil and Wax
Heating can decrease the adhesive strength of oil and wax to stuffs to be cleaned, make the cleaning solution much easiler to create cavitation so as to increase the solution's cavitation level, and then enhance the cleaning effect. Note: the best cleaning temperature is 40~60℃, i.e. 104~140℉.
SUS304 Die-casting Tank and Drain Valve
The cleaning tank and drain valve are made with SUS304 stainless steel. SUS304 stainless steel does better in resistance to weak acid or weak alkali solution. However, SUS304 stainless steel materials has no resistance to strong acid or strong alkalis solution, such as hydrochloric acid.
Customer
Reviewed in the United States on January 11, 2025
Works as advertised
Randy AB9GO
Reviewed in the United States on September 6, 2024
The ultrasonic power is said to be 120 watts but on the label it is 116 watts. Close enough. The heating power is advertised as 200 watts but the label says 150 watts. 50 watts is a significant difference! I purchased this unit on the specifications and this is disappointing.This being said, the unit has a good fit and finish, the power switch is splash proof and that is a nice feature.The cleaner has multiple cleaning modes that other units charge much more for and they work. Would I buy it again. At the moment yes. I really do not like the exaggerating of heating watts though. It would heat much faster with the extra 50 watts. I'd give it 5 stars if the specifications were correct.
Steve
Reviewed in the United States on September 15, 2024
Used this cleaner twice, both with great results. 3rd time I turn it on, the mode select goes crazy, and I can't select a mode. Sitting there not running the mode selector changes all by itself. Too expensive for 2 uses.I'd steer clear and save your money for a cleaner made by a reputable brand with higher quality standards.
Jose Restrepo
Reviewed in the United States on September 9, 2023
Lo uso para joyería y es muy buena opción! Lo único que no me gusta es que tarda mucho en calentar, de resto todas sus funciones son perfectas
Ken
Reviewed in the United States on July 16, 2023
The cleaning tray is the perfect size for small items such as eyeglasses, jewelry, and small engine parts. It completely cleaned a pair of eyeglasses including all of the gunk that accumulates on the nose pads. The next tests will be on carburetor parts from my lawn equipment. Very basic instructions are included but the machine is intuitive to use. There is a slight sound of vibration emanating from the unit's cover as it rests on the unit due to metal-to-metal contact. I was initially apprehensive over the possibility of the equipment being loud but the sound level on this particular unit is not irritating. The unit also provides an audible alert when it completes a timed cleaning cycle. Time will determine its durability, however, I currently recommend this product.
Andrew Haight
Reviewed in the United States on June 13, 2023
Bought this to clean the baffles on my Rugged Obsidian 9 suppressor. What used to be a 2 hour job involving a lot of soaking, harsh chemicals, gloves, scraping and brushing turned into a quick 20 minute bath in 50/50 Purple Power and Water. The baffles were spotless.This thing flat out works. The heater element surprised me. The solution and the tub along with the parts definitely made it to the temperature that I set for the program.Only thing I’d recommend is to hire someone who is a native English speaking employee to assist with your creation of the instruction manual. Also add more details about the different cycles like fullwave, pulse wave and so on. I had to Google search the terms and was directed to your website but didn’t see them in the manual. Maybe it’s in there but the writing is so small I needed to open it in a very bright room with a magnifying glass. It’s very hard to read your instructions
Angler
Reviewed in the United States on March 5, 2023
Once I filled the tank to the proper depth with deionized water i lowered the basket in the tank. I used sandwich baggies that I loaded rings and small pieces of jewelry into, for my family, I filled a baggie with an 8th of a cup of Dawn Ultra 4x mixed with one full cup of water. I zip locked the bag closed with the jewelry inside. I lowered the bag into the basket sitting in the water. At that point I turned the heat dial to the setting I required,,,in this case 50 degrees Celsius....(122 Degrees Fahrenheit} The lower left led lights up to the current temp of the water, while the light above it flashes at the point you set it by using the dial on the left. once the unit came up to my set point I set the timer on the right dial, in my case for 20 minutes. (It shuts off automatically) I removed the warm baggie with tongs and let it cool a bit. Poured out the baggies liquid content and then removed the jewelry and rinsed it all in cool water. It worked well with amazing results. I used the full wave setting. Since the deionized water in the tank was still without any impurities I decided to do the same thing all over again by doing a thorough cleaning of all of the internal components of a Glock after stripping more than just a quick field strip. I completely stripped it of all of it's parts. If you don't want to use full wave read the directions on how to set controls for Full wave, Semi wave, Degas and Pulse. It is a combination of pushing a dial and depressing a button.
MJD3
Reviewed in the United States on October 15, 2023
I tried others with the flat ceramic style transducer that DID burn out after only using twice. THIS machine is awesome. We thought the jewelry we put in this machine was clean from the lifebasic unit that burned up on the 2nd use, but after THIS unit its glistening just the way it was in the jewelry store... WOW! Definitely feels quality and will last. It even has an infinite mode to continually run indicating the build quality and intentions of this machine.
Recommended Products