Your cart is empty.
Your cart is empty.Our fender flares offer additional tire coverage and protection without looking cheap or flimsy. In fact, these fender flares have an extremely rugged bolted-on look. These fender flares are made from a unique poly material that is resists cracking, chipping or fading. The flares are also paintable should you decide that you want to have them custom painted. Fender flares are very easy to install right in your own garage. All you need is a little time since they are custom designed to use factory holes and there is no drilling or cutting required to get a perfect fit. / Materials: Abs plastic / surface finish: Matte (paintable) / fitment:02-08 dodge ram 150003-09 dodge ram 2500 3500fits 96", 78", 75.9", 76.3", 97.9" fleet side beds.
joshua gerving
Reviewed in the United States on December 2, 2024
Not a perfect fit for sure but looks decent does its job
KVR
Reviewed in the United States on January 4, 2024
Do yourself a favor, do not buy these.Just as a contextual note to mitigate any blame on my skills, I have been working on cars for about 40+ years, including repairs and rebuilds on every automotive system. I can't recall ever coming across an automotive product so blatantly defective as these fender flares.They don't fit on multiple parameters. The rear ones were too long, i.e. they hung down below the truck's quarter panel. The front ones were also too long, i.e. they hung down past the bumper. When I bolted in the front bottom fasteners on the both rear flares, I had to push them in so far that once bolted, the tension pushed the top arc of the flares out. And of course the adhesive wouldn't stay because of the degree of tension in the plastic once bolted down. That the holes didn't align wasn't a big deal, i.e. easy enough to drill out but these flaws just added to the tableau of shoddiness that I grimly faced during the install.To worsen matters, I was stupid enough to spend about $400 on factory paint, along with primer and clear coat, and about 15 hours of my time painting them, before making sure they would fit. Granted, you can't really test fit them because of the adhesive backing on the flares, but I should have spent the time installing them completely, including adhering the backing. Even thought this would have meant replacing the adhesive backing if they did fit (would have had to pull them off to paint them), it would have been a time and money saver overall with the option of sending them back.Another red flag was that they were warped right out of the box. I erroneously assumed that once bolted on, they would adhere to the truck's contours. This was a painfully incorrect assumption. I should have sent them back immediately.A frustrating waste of valuable time, money and effort. I'd strongly recommend passing on these flares.
brian
Reviewed in Canada on August 26, 2023
they look great on the truck from a distance, but they were warped and don't fit perfectly,
Rob
Reviewed in the United States on July 23, 2023
First of all, these are $86 dollar flares, not $400, so my expectations were accordingly. There were no instructions in the box. It helps to have a friend hold them in to place when installing. My experience: I found the vinyl trim that comes in the kit to be useless and I didn't use it. Most of the factory holes do not line up, so don't try to force it. I installed these to hide the common rust areas on my 08 Ram. I used a grinder to remove the rust and then pained the areas with POR-15. The best method I could figure out to install the flares was to have my partner hold them into position as close as we could get, and drill a hole and use the supplied self tapping screws. This got them pretty close, but the rears do have a gap on the back side. I worked with them for well over an hour to get them to set flush, but they weren't having it. The front fit better than the rears, by a long shot. All in all, I give them a 3.5 stars. For the money, they work and they hid the rust spots nicely. I have attached photos of the front and rears installed.
Jerry Vincentt
Reviewed in the United States on May 18, 2023
Price point was great. I put these on my truck and really changed the look. The quality of the plastic and rubber seal were excellent. Fit great and snugged up on the truck. No rattling. Perfect. Love em
Susan
Reviewed in Canada on May 18, 2023
I like the final look of them once they are on. They are not an exact fit and you have to be ready to do some re-drilling and adjusting to make them fit.
Harry S-L
Reviewed in Canada on December 20, 2023
Perfect fit for our truck! Happy with the purchase!
bill fancy
Reviewed in Canada on September 21, 2022
These are very difficult to fit if you don't have skill and experience!!!
Matthew
Reviewed in Canada on June 23, 2022
I purchased these and ended up returning them within a week. When you initially purchase these, you're excited, because these are half the price of any other flares on the market. Theres a reason for that.These flares are warped beyond repair. You cannot friction fit these out of the box. You need to heat them and reshape the fenders until they fit. I reached out to DNA support and they initially responded, but ghosted me after I asked for help and recommendations to try and fix the warping. Buyer beware.Full disclosure, the front fenders were completely warped. Rear fenders did fit with some elbow grease but ended up failing at the 3M tape due to warping after 3 days. Trucks paint was cleaned with isopropyl alcohol prior to installation to aid in adhesion. Truck is a 2012 Dodge Ram SLT Quad Cab.I have recently installed other flares on my truck and they fit like a glove. These flares are obviously factory seconds or very year specific.
TP
Reviewed in the United States on May 28, 2022
Extremely hard to install, rubber edges don't fit well, product not cut for vehicle, had to customize & was a long frustrating installation for 2 people.
Shane Edwards
Reviewed in the United States on May 31, 2021
Fit like they were supposed to on a 2009 Dodge Power Wagon. The outer trim that goes between the flare and the truck body was a pain, until super glue was applied, stupid issue solved. The directions were simple enough for my 16 year old son to understand and install without a whole lot of my involvement. Time will only tell how good they really are
Big "E"
Reviewed in the United States on April 5, 2021
What I liked most was the coverage. I had some pretty bad rust extending about 3 inches above wheel well. I power steel brushed it, sprayed with rust inhibitor inside and out, and spray can painted it. You can't even see it now. Hopefully that'll buy me several more years of a good looking truck. Be warned, install was a bit of a bear. Some patients goes a long way for good install job.
Torrey
Reviewed in the United States on March 14, 2020
Covered up the rust and rot nicely. Were easy to install and look good. I kept them black, so I can't comment on how paint would adhere to them.
Recommended Products
