Your cart is empty.
Your cart is empty.This replacement windshield wiper linkage has been engineered to match the function and performance of the original linkage on select vehicle years, makes and models to restore wiper operation. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Jeep TJ: 2003, 2004, 2005, 2006] - [Jeep Wrangler: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006]
Steve Sendlakowski
Reviewed in the United States on September 1, 2024
Same issue that everyone else had. Wish I would’ve read the reviews first.Not designed for OEM wiper motor.Spent 2 hours drilling new mounting holes and dremelling out flange to find that it hits the mounting screws.Going to try to find a bigger motor that would be compatible.Waste of money.
TC
Reviewed in the United States on December 28, 2023
As others said, requires significant dremel/drilling to fit, particularly on the motor to drive arm hole; only option I could find though.Save the headache and just buy one with a motor installed instead.
PJC
Reviewed in the United States on June 30, 2021
Not compatible with actual Jeep Wrangler 2000.It was assembled incorrectly, I needed to disassembly to invert main tubes and assembly correctly.The motor plate is not compatible for OEM motor, the motor holes separation is 3/4” more than original. I made the new holes to be able to install the motor.And last one and most difficult to adjust was to expand the piece of plate that connect with the motor, the hole is narrower and didn’t set with the screw in the center of the motor.
Review Name
Reviewed in the United States on December 11, 2021
2002 wangler TJ. The knobs that hold the wiper arms are slightly too small on the current version of the part.In a previous order the Motor mount holes had to be modified as other people have noted.Very poor quality control, but it seems to be the only option for Wrangler TJs, since Jeep no longer makes the part.
Customer
Reviewed in the United States on November 15, 2021
I did alot of modifying to make it work. First off motor mounting was too wide didn't line up. Also motor shaft didn't fit linkage hole. So I dremeled that hole bigger & filled 3 new holes to mount motor. Than to top it off wiper arm splines didn't engage to splines on linkage so I put teflon to snug it on since I already modified the rest & probably couldn't return it anyway!
E.M. Shue
Reviewed in the United States on October 3, 2021
I had to modify the motor mount holes ( drill 3 née holes for bolts and made center drive shaft hole bigger) other than that it seems to have replaced the broken part
Recommended Products
$153.72
$ 75 .99 $75.99
$23.60
$ 10 .99 $10.99