Shopping Cart

Your cart is empty.

Your cart is empty.

Double Sided Textured PEI Sheet, 600 X 600mm Flexible Magnetic Build Plate Kit, Print Build Plate Removable with Magnetic Bed for 3D Printer

5.0 Write Review
Free shipping on orders over $29.99

$148.60

$ 61 .99 $61.99

In Stock
  • [TEXTURED/SMOOTH DESIGN]: Compared with the only smooth or textured surface, the Textured/Smooth design can meet different printing needs. Among them, the matte texture makes it easier for the printing material to adhere to the of PEI, and the printing effect of the smooth is more delicate.
  • [DIRECTLY TO USE]: No glue, no tap and other fixed ways, when hotbed temperature reaches 60℃ ,materials such as PLA ABS will stick well, and after printing, when PEI build plate cools to room temperature, it's easy to remove the printed matter from the by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
  • [HIGH QUALITY]: Flexible, removable, high strength and heat resistance, double-layer design, thicker and more And compatible with PLA, ABS, ASA, PETG, TPU, PC, PA, etc. When printing PLA filaments, the temperature of the hot bed is set at 60°C, and PETG needs to be set at 80-85°C. Note: The adaptation temperature of different materials is different, please adjust it reasonably.
  • [NOTICE]: Both sides of the double sided PEI coating are printable by simply placing it on the heated bed, removing the protective film, and printing directly. Occasionally you can see bubbles between the PEI film and the stainless steel plate, which does not affect the use. Size 600x600mm / 23.62x23.62inch.
  • [PRACTICAL FEATURES]: PEI is a superior build material that offers a range of over traditional PEO/PET. It's more resistant to high temperatures and wear, and provides better adhesion. Achieve excellent adhesion at around 60℃ bed temperature, no warping. Because the thickness of the product itself must be re-leveling after attaching this item to avoid damage the


All in One Built in Plate: The premium PEI material allows for easy adhesion and detachability of printed parts, providing flexibility for successful prints.
Extensive Compatibility: The textured PEI board is compatible with various materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc.
Specification:
Item Type: Double Sided PEI Board
Material: PEI Spray Powder, Soft Magnet
Size: Approx. 600x600mm / 23.62x23.62in
Size:
PEI Spray Thickness 0.125mm
Rubber Sheet Thickness around Approx. 1.5mm / 0.06in
Overall Thickness around Approx. 2mm / 0.08in
How to Use:
Direct installation and use
packing list:
1 x Print Platform
1 x Flexible Magnet


Recommended Products
Double Side PEI+PET Build Plate 184x184mm Fit for Bambu Lab A1 Mini 3D Printer, Smooth PET+Textured PEI Spring Steel Build Plate

$12.59

$ 5 .99 $5.99

5.0
Select Option
FYSETC 3D Printing Platform 300x300 Build Plate - Double Sided Textured PEI Spring Steel Sheet: Powder Coated Flexiable Texture Build Surface with Magentic Sticker Comaptible with 3D Printer TAZ 6

$34.66

$ 16 .99 $16.99

5.0
Select Option
FYSETC 3D Printing Build Platform CR10 S5 Upgrades Flexible Spring Steel Sheet 510x510mm/20x20in Bed Double Sided Textured Pei Powder Coated Gold Build Plate with Sticker Base 2.0MM

$113.00

$ 50 .99 $50.99

4.8
Select Option
IdeaFormer Water Ripples+Wood Grain Textured PER Build Plate for Bambu Lab X1/X1C/X1E/P1P/P1S/A1, Smooth Flexible PER Spring Steel Plate Effect Sheet for Bambu 3D Printers 257x257mm

$24.99

$ 11 .99 $11.99

4.3
Select Option
ANYCUBIC 3D Printing Plateform for Photon Mono M7 Max Resin 3D Printer, Replacement Build Platform

$79.99

$ 34 .99 $34.99

4.4
Select Option
PEI Build Plate Compatible with Bambu Lab X1/X1C/P1P/P1S/A1, 257x257mm/ 10.1x10.1inch Double Sided Textured PEI Spring Steel Sheet Good Adhesion Plate for Bambulab 3D Printer Series (Gold)

$12.99

$ 5 .99 $5.99

4.6
Select Option
Dremel 3D45 Flexible Build Plate Conversion Kit

$99.43

$ 39 .99 $39.99

4.7
Select Option
Build Plate for Creality K1/K1C/Ender 3 S1/3 S1 Pro/Ender 5 S1/Ender3 V3 KE/Ender3 V3 SE - Tinytrees Ender 3 V3 SE K1 K1C Build Plate 235x235mm (No Magnetic Base) (Water Ripples+Wood Grain)

$9.99

$ 4 .99 $4.99

4.7
Select Option