Shopping Cart

Your cart is empty.

Your cart is empty.

ECCPP 2pcs 2 inch 5x4.5 to 5x4.5 Wheel spacers 5x114.3mm fits for 1964-2014 for Mustang 1983-2011 for Ranger 2010-2014 for Taurus

Free shipping on orders over $29.99

$41.99

$ 20 .99 $20.99

In Stock
  • FITMENT--Wheel Spacers 5x4.5 2 inch Fit Replacement for 1992-2011 for Crown Victoria 2007-2014 for Edge 1991-2010 for Explorer 1955-1967 for Fairlane
  • SPECIFICATIONS--5x4.5 Wheel Spacers 2in with Bolt Pattern: 5x4.5 (5x114.3mm). Spacer Thickness: 50mm (2.0 inch)Hub Bore: 82.5mm;Stud/Nut Thread Pitch: 1/2*20
  • BENEFITS--WHEEL SPACERS 2 INCH Designed to move the wheels further out from the hub,giving your vehicle a more aggressive stance and allows for better handling characteristics
  • VERIFY FITMENT-- 5x114.3 WHEEL SPACERS Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 2 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 2 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 82.5mm
  • VERIFY FITMENT-- WHEEL SPACERS 5X114.3 to 5x114.3 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 2 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 2 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 82.5mm,advise torque specs at 75-85 Ft/Lbs



Product Description

wheel spacers
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

fit for

  • 1992-2011 for Ford for Crown Victoria || 2007-2013 for Ford for Edge || 1991-2010 for Ford for Explorer || 1955-1967 for Ford for Fairlane
  • 1963-1970 for Ford for Falcon || 1960-1967 for Ford for Galaxie
  • 1967-1974 for Ford for Galaxie 500 || 1964-2014 for Ford for Mustang
  • 1967-1973 for Mercury for Cougar || 1992-2011 for Mercury for Grand Marquis
  • 2003-2004 for Mercury for Marauder || 1999-2010 for Mercury for Mountaineer

If your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation

Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:

1) Shorten the factory studs

2) The wheels need to have the open slots (cavities) between mounting holes.

3) Purchase a set of shorter studs and replace them with the factory studs.

wheel spacers
fitments

fitments

  • 1984-2001 for Jeep for Cherokee || 1986-1992 for Jeep for Comanche
  • 1993-1997 for Jeep for Grand Cherokee || 2006-2012 for Jeep for Liberty
  • 1987-2006 for Jeep for Wrangler || 2003-2005 for Lincoln for Aviator
  • 2007-2013 for Lincoln for MKX || 1991-2011 for Lincoln for Town Car
  • 1983-2011 for Ford for Ranger || 2010-2014 for Ford for Taurus
wheel spacers
wheel spacers

Grizly_Atoms
Reviewed in Canada on June 17, 2024
these created such a shake i thought id bent an axle. the wheel was wobbling at about a full inch plus. garbage.
Kody hennager
Reviewed in the United States on November 4, 2020
Still need to do an alignment on my truck. But it looks great with them on it
Recommended Products

$19.00

$ 9 .99 $9.99

4.8
Select Option

$64.98

$ 24 .99 $24.99

4.3
Select Option

$15.48

$ 6 .99 $6.99

4.5
Select Option