Your cart is empty.
Your cart is empty.Product Description
Installation
1. Remove the tape
Remove the double-sided tape from the bottom plate
2. Attach tape to the panel
Attach the tapes on the back of foam panel. It is highly recommended to set 5 tapes in one panel as the picture.
3. Clean the wall
Make sure the wall is clean enough, no dust and no water.
4. Attach the panels on the wall
NOTE: you should confirm the location before installation. Because it is not easy to remove after been attached on walls.
Grant Dupré
Reviewed in the United States on September 3, 2024
these work exactly they’re advertised, but you’d better hope and pray you don’t have to take them down. they permanently damaged the walls in my old room.
Sean
Reviewed in the United States on September 2, 2024
Finally! A removable sticky tab that doesn’t ruin the paint! Perfect for these acoustic tiles! Rockstar approval right there.
Lewk
Reviewed in the United States on September 12, 2024
If you're purchasing these along with the cheaper (and popular) acoustic panels here on Amazon, I definitely recommend these adhesive squares. Make sure that you press these in firmly and they stick to the foam nicely. They also adhered to both the painted drywall and the painted wood in my room nicely. Best to use 4 adhesive squares per panel, but you can also cut them in half lengthwise to get more bang for the buck.Be sure to press them firmly into the foam so you can take the backing off a little easier, which will prove helpful when putting up a couple hundred of those panels on the walls.Fastest way was to just make a little station where you could pile up the panels to one side and have the adhesives in the middle. If you have someone to help you, they could put the adhesives on the panels while you take them and put them up on the wall - you'll have 100 of them up in about an hour. Throw on some tunes, and you have a nice quick project.I put them up last night and gave some of the panels a tug at random. All of the panels felt firmly attached to the wall, enough that sudden low frequencies (like that of a bass drum) would certainly not make them fall off.
Kathleen1357
Reviewed in the United States on July 18, 2024
I bought one package and they work great. Nice big square patches, and the style, with the little curved tab made pulling the backing off, a breeze. When I ordered another package, they sent me half inch circles. I didn't even bother trying but can only imagine... half the size, not tab to pull the backing off, would be more difficult. Plus the label on the package said they were square when it was obvious they were round. Hopefully you don't get the wrong product. If you do, just send it back, Amazon replaced them and I got the size and shape I was supposed to.
vishal gupta
Reviewed in India on November 18, 2024
This is bought for my acoustic foam but totally uselss
Jennifer
Reviewed in the United States on November 12, 2023
used for sound proof panels. only 10 minutes after putting the panels up (4 tabs per panel), 1 fell off. by morning, 2 more had fallen off and clearly a few are now loose. the tabs stick to the wall fine, they just do not stick to the foam well enough
Gavin
Reviewed in the United States on October 2, 2023
I got these for some foam panels for my room and they work fine. They stick very well and if needed are easy to remove. I had to adjust one of the panels and the adhesive still was sticking strong even after un-sticking it to my wall. The only thing I don't like about these is that getting it to stick to your foam is weirdly hard. Even when I was peeling off correctly I had some issues with it sticking. I'd give this a 5 if I didn't have an issue with that but outside of that little annoyance these are worth your time!
Michael Galgano
Reviewed in the United States on April 2, 2023
I use one of the bedrooms in our home as an office/music room so I have some of those foam acoustic tiles on 3 of the walls. I had been using 3M strips for 2 of the walls for years with no issue but for some reason, I could not get the tiles on the 3rd wall to stay up. Every morning I would walk in to find half of them on the floor. It may have something to do with the way the air flows from the A/C vents in the ceiling. I tried countless types of adhesive tapes and stickers all to no avail. Then I discovered this product with promising reviews. I can happily say that I used these strips and they worked perfectly! I used 5 squares per tile (4 corners and one in the middle) per the manufacturer's recommendation and they went up and have stayed up for a couple of weeks now. Every so often I will gently tug at a tile to test the adhesion and they are holding up beautifully. When the 3M strips I'm using on the other walls inevitably fail, I will purchase more of this brand. One other thing I really like is the way they have little tabs on the strips so they are very easy to work with when removing from the packaging and exposing each side of the adhesive. Other brands have you trying to get your thumbnail under the paper trying to peel them apart with too much hassle. I buy a TON of stuff from Amazon and don't always come back to write reviews, but when a product is this good and has solved a consistent problem for me, I'm happy to let others know it worked out well. Thanks!
Jack Burns
Reviewed in the United States on July 22, 2022
These things are STUCK. That’s a good thing after all!
Recommended Products