Your cart is empty.
Your cart is empty.Product Description
Multi-purpose cable protectors
Extreme Rubber Cable Protectors supports heavyweight in various environments and has multiple purposes.
- Warehouse & Factories
- Outdoor public spots
- Constuction sites
- Outdoor events
- Worksites
Premium Rubber Cover Protectors
Reliable Cable & Hose Protection
Low cost and high performance, this is what Extreme Rubber Cable Protectors are about! Offering cable protection almost as good as its polyurethane counterparts, these heavy duty cable ramps provide great traction from the rubber material and considerable weight prevents unwanted movement.
Each model incorporates connectors to extend its range for specific applications and the dense rubber supports vehicle traffic in various environments.
- Anti-skid decelaration
- Flip-open design
- Interlocking connectors
- Made from Industrial Grade Rubber
- Place or remove cables quickly & easily
Slip Resistant Protection for Any Environment
The Electriduct Heavy Duty 2 Channel Cable Protector Cord Ramp is designed with exceptional slip resistance to ensure safety in high-traffic areas. Its dense, industrial-grade rubber construction provides a naturally high-friction surface, enhancing traction for pedestrians, carts, and vehicles. Unlike lightweight plastic alternatives that can shift or slide, this protector's considerable weight keeps it firmly in place, even in busy environments. Additionally, the textured, non-slip surface further reduces the risk of slips and trips, making it ideal for warehouses, construction sites, outdoor events, and other demanding settings. Whether placed on concrete, asphalt, or uneven terrain, it stays securely in position, offering stable and reliable cable protection in any condition.
Reinforced Structure
The reinforced structure of the Electriduct Heavy Duty 2 Channel Cable Protector Cord Ramp enhances its strength, stability, and load-bearing capacity, ensuring reliable performance in high-traffic environments. The grid-like underside evenly distributes weight, preventing cracks, warping, or deformation, even under 5,000 lbs per axle from carts, foot traffic, and light vehicles. This added rigidity keeps the protector securely in place, reducing movement on various surfaces while also absorbing shocks and impacts to protect cables from sudden force or heavy loads. Built for durability and long-term use, this design ensures maximum protection in warehouses, construction sites, and event venues.
Versatility Where You Need It
The Electriduct Heavy Duty 2 Channel Cable Protector Traffic Wire and Hose Ramp Cord Cover is a versatile solution for protecting cables and hoses in various environments. It is ideal for traffic management, allowing vehicles to drive over cables without causing damage, making it especially useful at outdoor events, concerts, and festivals. Additionally, it finds application on construction sites, safeguarding power and communication cables in areas with heavy machinery. In warehouses and industrial settings, it helps organize and protect cords while reducing tripping hazards. It is also commonly used in film and TV productions, ensuring cables remain safe during vehicle movement on set. With a weight capacity of up to 12,000 lbs per axle, this cable protector is designed for heavy equipment operations, enhancing safety and prolonging the lifespan of valuable wiring and hoses.
Safety Features:
Reliable Cable Protection for High-Traffic Areas
The Electriduct Heavy Duty 2 Channel Cable Protector Cord Ramp is built for tough environments, featuring industrial-grade rubber that resists cracking, warping, and weather damage. With a 2,000 lbs/axle load capacity, it safely supports foot traffic, carts, and light vehicles while its non-slip surface prevents shifting. The interlocking male/female T-connectors allow seamless expansion for larger coverage. Designed for warehouses, construction sites, and outdoor events, this protector offers exceptional traction, durability, and weather resistance. Its compact yet sturdy build (40"L x 10"W x 1.9"H) ensures reliable cable protection in high-traffic areas. A temporary rubber odor may be present but will fade over time.
Odor Removal Instructions:
Brand new rubber will emit an odor, this is for all new rubber items regardless of product.
Because the base of the product is made from rubber, and it being brand new, it will emit this odor, which the process is called outgassing. This outgassing will dissipate in time, but to help speed up the process, there are a few things that can be done.
1: Sunning - this means to put outside in the direct sun to heat up the rubber, remember to face the rubber to the sun. The act of heating the rubber will speed up out-gassing (think of heating up water, the water turns to steam, steam is the outgassing). Depending on the intensity of the sun will determine how long it takes for the outgassing process. It can be a few hours, days to a few weeks depending on the heat intensity (donโt worry the product can handle it).
2: After โsunningโ the rubber (which the odor should be dramatically less or almost non-existent), use a neutral pH cleaner to spray, let soak, then wipe the rubber surface. Types of neutral pH cleaners: dish soap, odorban, Zep, etc.
3: Repeat, if necessary.
Nanny-philosopher
Reviewed in the United States on February 5, 2025
Don't be the reason your equipment comes unplugged or someone trips! This piece is easy to use over and over, effective at cord protection... and great for its fit and durability.
Customer
Reviewed in the United States on May 15, 2020
We have had these across the entrance to our parking lot for about 1.5 years now. Full sun exposure, snow, rain, multiple UPS and FedEx comings and goings daily, our forklift occasionally and just today, a dump truck full of road base.These cable protectors are outstanding. Even with all that traffic and not being bolted or pinned to the ground, we only have to kick them back in a straight-ish line every couple weeks. I have absolutely nothing bad to say about them.
James H.
Reviewed in the United States on January 11, 2018
I bought 4 of these which I connected together. I needed them to run across the width of my driveway to conceal power cables for my dual automatic Driveway gate wiring. Have had heavy trucks come in and out and also the usual traffic in and out of the driveway with multiple vehicles daily. These things are extreme, very heavy duty and do exactly what we needed. Each one is heavy, rugged durable. Have had these for some time now and there look brand new like no wear and tear, they can also act like a small speed bump, absolutely worth every penny and kept me from having to trench out my asphalt drive, install conduit to run wire and re-asphalt.. Very smart and positive purchase, you will be very satisfied, when I ran Christmas lights to the far side of the driveway I even had another slot to run those extension cords, awesome, love them, Thanks.
Pierre Cรดtรฉ
Reviewed in Canada on August 17, 2017
Good product
RackOnInNC
Reviewed in the United States on May 7, 2017
UPDATE: Still good 3 years later. The flaps are cracking a bit but still holding up. Even if the flaps failed the channels are deep enough I would probably just keep on using them.I have my RV 30 amp cord 3/4 inch and a fat 1 inch heavy duty hose for my macerator running through a pair of these where my RV is hooked up outside my house so I can get in and out of the garage. The channels are plenty wide and deep and they seem to be plenty sturdy. Beats unhooking everything by a mile.I really didn't notice the smell others have mentioned, but then mine are outside. They just smell sort of like it does in a tire shop when you first take them out of the box.
the_real_crab-
Reviewed in Canada on December 8, 2017
What was expected
Glen
Reviewed in Canada on December 4, 2017
Works well as designed.
Nicolas Pellemans
Reviewed in Canada on June 3, 2015
I use it for protecting the cable of a Tesla Wall Connector installed in my garage whenever I unfold the cable for charging. The cable coming out of the charging station, although relatively large, fits perfectly in any one of the two channels. This way, the cable does not run directly on the floor surface and no one can step on the cable itself while the connector is plugged into the car.
Scott Paul
Reviewed in the United States on June 2, 2013
These cable guards work great! Strong, durable and well made, these guards survived rain, mud and a number of trucks driving over them. Easy to use as the cables just drop right in and are easy to remove as well. The only drawback is when they first arrive. They retain a heavy manufactured rubber smell that doesn't go away quickly! Advise: put them outside for several days and wash them before attempting to use them indoors or a closed space. I have had mine for several weeks now and the smell has diminished greatly. Again, great product but use outdoors only for the first few weeks!
Henry Park
Reviewed in the United States on May 9, 2013
Good product. Does what it is designed to do and it's heavy; this protects cables that have to go through areas of traffic.I currently have 120VAC flex conduit and a bunch of Cat5e and Cat6 data cables running through the channels. It has two channels so you can separate low voltage and high voltage. The channels are also very spacious (1-1/8"W x 1-1/8"H).I would not run anything that can have a lot of amperes through this since it does not come with UL ratings and I don't know the tonnage limit of what can go over it before it fails. It'll stand up to standard vehicles including work trucks. I have not tried this with fully loaded commercial vehicles, haulers, or heavy machinery; do so at your own risk. The odor of the rubber is quite strong, but it goes away after a week or two in an open area. A drawback of this product is that it does not have mounting holes to drill it to the ground but since it's hard rubber you can easily drill out some holes.
James
Reviewed in the United States on October 2, 2013
It's built very well, and does what it is designed/made for. The materials will most likely withstand most harsh environments, however, I am using this in an office that has very few outlets and the fire marshal advised us to stop daisy-chaining the extension cords to get power out to an open space. We bought a 16-outlet strip with a 15-feet cord and now are in conformance to the local code. The cable extends from an outlet in an office to the open area, and travels across a walkway. This ramp is a bit over-specified but does the job well. Highly visible and extremely rugged. Curiously, the product let out a very strong stench (chemical smell) for a week or so, and can still be detected after a few months. It is probably the chemical they use to separate the product from the mould that makes the product, but I wished the factory would have prepped/cleaned it for indoor use as well (thus the minus one star). Other than that, the flap works well, and everything fits. The channels are big enough for several power cables and even a few network cables with room to spare. I have another one on standby, in the event we need to replicate the code-conforming retrofit elsewhere. If I need more of these beasts, I would buy this product again without hesitation (alas, with a good scrubbing before putting it to use indoors).
TVBob
Reviewed in the United States on July 18, 2011
The expression you get what you pay for is true here, these are pricey but they are worth it. Strong, tough construction, nice wide channels which hold our wiring well and with two channels in each they do that job well. We use them in our television studio to call attention to the cables running to our cameras. They don't make it any easier to walk over than just the cable but they eliminate the trip hazzard.
Recommended Products