Your cart is empty.
Your cart is empty.Product Description
Perfect Fit
Fits most machines where the motor bolts on the side of the machine or under the flywheel such as the Singer 15, 66, 99, 185, 285, 293B, 206, 306, 319, 238, 239, 242, 247, 248, 252, 257, 258 and more. Fits most Japanese machines with external motors.
Oldies & Goodies
The Enduro HM-100 kit is a universal-fit, 110-volt, 1.0 amp motor that will fit most older machines where the motor bolts onto the side of the machine, under the fly wheel. Machines like Singer 15 Class HA1, 66, 99, 99K, and many others.
HM-100 Specifications
- 110 Volts
- 100 Watts
- 6000 RPM
- 50/60Hz
- 1.0 Amps
- 5' Power Cord
- Runs Counterclockwise
Everything You Need
The Enduro HM-100 Domestic Sewing Machine Motor Kit includes everything you need to get up-and-running and stay up-and-running. Kit Includes:
- 110 Volt, 100 Watt Motor
- Foot Pedal Speed Controller
- Power Cord
- Belt
- Attachment Bolt
- Replacement Brushes
Copper - Not Aluminum
The Enduro HM-100 Domestic Sewing Machine Motor has copper windings and commutator, not aluminum like some cheap knockoff motors. Copper windings allow the motor to run cooler and more efficiently, as well as last longer.
Universal Fit
Heavy duty motor and sturdy L-bracket mount, fits most domestic and imported home sewing machines. Easy to install with common household tools and no experience.
Powerful & Economical
New home sewing machine motor and foot pedal speed controller. Universal fit. Double the power with .9 amp motor. Fits most older machines including: Singer 15, class HA1 Singer 15, 66, 99, 99k and many more.
Luis Alonso
Reviewed in Mexico on January 29, 2025
Bueno
Gordon T. Womack
Reviewed in the United States on January 16, 2025
The motor is good for this purpose but the mounting brackets required extensive filing to fit to my Singer 99. The supplied pedal was also basically an on/off switch making slow stitching impossible.*If you're competent electrically*Cutting the supplied pedal off and spicing an original pedal in results with an adjustable sewing speed
Demetrio Solano
Reviewed in Mexico on August 22, 2024
Es el Producto que necesitaba para dar mantenimiento a un equipo.
brian buller
Reviewed in Canada on July 30, 2024
doing the job I needed on a watchmaker lathe
ptpy
Reviewed in the United States on December 2, 2024
it works well with my 1948 singer sewing machine. had to do a little re-wiring to connect the light, but I'm very happy with it.
KimB
Reviewed in the United States on November 15, 2024
This motor runs, but with the included foot pedal, it acted as only an on off switch. There was no speed control.Upon opening the foot pedal, it is supposed to be variable speed, but wasn’t adjusted correctly. After adjusting it now it at least has some variable speed, unfortunately even when adjusted, it has to narrow a range of speed control to be functional. It either goes to slow or way to fast, even a very slight movement of the foot pedal and its to fast.
Dan
Reviewed in the United States on August 2, 2023
I bought a motor from another site and the motor was trash. It smelled like burnt wires and you could see sparks within the motor.This was the total opposite. Runs smoothly and there was a smell at the very beginning of use, but it soon went away and no other problems since. I am very glad to have purchased this motor. Happy camper here.
Roberto vega lopez
Reviewed in Mexico on April 23, 2022
Muy buen producto, tiempo de entrega exelente
Kyle
Reviewed in Canada on April 13, 2022
I bought it to test an industrail machine without a table. works fine with nice speed control. Under powered for my aplication but I'm sure it would be fine for a domestic machine. For the price it is decent
R. Milstrey
Reviewed in the United States on February 27, 2021
Likes: Machine is usable again @ an investment of less than $30. Installation was, well, reasonable.Dislikes: Control pedal is fairly binary - it's full on or full off. Somewhat difficult to modulate slow going.Challenges: Biggest challenge was re-wiring existing worklight to work properly. Original setup had worklight switch controlling motor power, too. This setup was challenging -- there was no room for the worklight wiring between the motor and the sewing machine body & there was precious little spare wiring. A bit of cussin' and fightin' got everything back together, although the motor power is no longer controlled by the worklight switch. Not a real problem.
Mike L
Reviewed in the United States on October 6, 2021
Pedal is an on/off switch, not a variable speed. Pretty useless for a sewing machine. Also Very thin wiring for a household electrical appliance. ALSO, If you like the smell of burning plastic, and enjoy a light dusting of electrical smoke emanating from the motor while you sew, this product is definitely right for you! I ended up buying the Dayton 2mo33 from Grainger, which turned out to be a direct replacement for the old sewing machine motor. No more problems. Save your money, don’t buy the enduro motor and pedal.
New England Yankee
Reviewed in the United States on October 25, 2020
Perhaps I'm lucky, but my motor runs fine, the pedal speed control works fine, and while the quality of the plug could be better, it also works fine. No cut-outs. No wobble. No overheating. Everything is put together properly.I used the motor to build a stand-alone bobbin winder for my wife. Very simple ... a board, a winder, and the motor. It, too, works fine ... It took some tweaking. The tension disks had to be polished. The bobbin spindle had to be wedged wider. I had to adjust the positioning of the belt pulley. Finally, positioning the motor with the existing mount was awkward, though I was prepared to fabricate one, if needed. I considered reversing the motor, but decided I would rather not open it up.Pretty much par for the course with generic parts. It's a good motor for the money and was as expected.
rkruz
Reviewed in the United States on April 26, 2020
Fit a New HOme MyExcel 23L sewing machine.The motor went out on the above. Looking at the Enduro carefully the measurements of the motor appeared to be the same so I took chance (not much of one since it was returnable) and got the Enduro motor.The new motor fit the existing bracket and I simply wired the motor to the same 115vac used for the failed motor.The motor ran clean and smooth and the existing food pedal speed controller worked perfectly.I expected some modifications and I discovered them when I got to the motor pulley. The New Home has a goged pulley that fit a split sized shaft so these were not compatible to fit the Enduro 6mm shaft. I found a hillbilly fix but not the lighthearted.All in all the motor was a great price and worked wonderfully and I saved a lot of money vs buying even a used motor for this discontinued MyExcel machine and the custom mods were expected with this old machine so high praise for the Enduro.
Recommended Products
$35.80
$ 18 .99 $18.99