Shopping Cart

Your cart is empty.

Your cart is empty.

Enduro Steel BB90/BB95 Kit for Shimano Cranks

Free shipping on orders over $29.99

$29.99

$ 13 .99 $13.99

In Stock


Enduro Steel BB90/BB95 Kit for Shimano Cranks


OmerMurat
Reviewed in the United States on January 3, 2023
Fit like a glove and work like a charm.
Matt P.
Reviewed in the United States on May 26, 2021
I received the bearings, 3 black plastic spacers and 2 dust covers. On each side of the bike, install the black washer/spacer supplied, then the bearing, then the supplied dust cover. The inner diameter of the bearings in this kit is smaller than the OEM bearings so you can not use the OEM dust cover with these bearings. The OEM dust cover fits through the OEM bearing and has a small lip that protrudes out the other side of the bearing to keep the cover in place. The supplied black washer/spacer makes up for the small gap filled previously by the OEM dust cover part/lip.
bill s preston esquire
Reviewed in the United States on April 23, 2021
Good Product. Fit 2018 Emonda SL6 Disc perfectly
Tony Toussaint
Reviewed in Canada on April 22, 2021
Installed this bottom bracket and got rid of the clicking noise on my bike. Genuine Enduro product.
DF
Reviewed in the United States on March 19, 2020
This product has been unfairly reviewed possibly due to the seller fulfilling orders with the wrong BB90 kits. This review is for BB90 bearings compatible with Shimano cranks (with a 24mm diameter spindle). Shimano kits will also fit other brands with 24mm spindles like FSA and Rotor. The BB90 kit for Shimano cranks include 2 bearings sized MR2437LLB, if you only need the bearings and not the seals or spacers I would order the Enduro MR2437LLB bearings individually vs. the kits, as you will save money.I ordered the Shimano BB90 kit and received the BB90 kit. Product is great and the seller shipped the right item. 5 stars to the product and 5 stars to the seller.Other reviews suggest that shoppers ordered the BB90 Shimano kit but received the BB90 GXP kit, GXP cranks have a tapered spindles, 24mm on the drive side and 22mm on the non-drive side. For this reason I avoid GXP cranks because they can cause premature bearing failure due to their design.If you ordered the Shimano Kit and received the GXP Kit or vice versa, consider leaving seller feedback and not a product review. The issue may be with incorrect fulfillment or packaging and not a faulty product.
Nicholas J.
Reviewed in the United States on May 31, 2019
Do not buy. Package was labeled for a Sram crank, then relabeled for a Shimano crank. Only 1 bearing was the correct size.
Craig
Reviewed in the United States on May 1, 2019
Update 12/29/19: I think this is my 5th time ordering this product. The last 3 times I got the BB90 to GXP bearing set. Waited about 6 months and tried again. 5th times a charm I guess. Finally sent the proper kit. ABEC 3, by the way. Adequate in my opinion as I'm not likely to achieve RPMs much over 110 anyway. Moderate Longevity. Changed out rvery 5000 road miles. I have trouble with these rusting out in 6 months on my trainer. My try full ceramic if I can't find a fix for that.
Customer
Reviewed in Canada on August 31, 2017
Bon prix livraison sans probleme
Tony B
Reviewed in the United States on August 22, 2017
I'm giving only 4 stars because the package contained sets of 2 bearings, 2 seals, 2 spacers and 1 wavy washer. and not 4 seals as shown. The bearings and two seals were the correct ones for my BB90 spec bottom bracket, and the remaining parts were for a similar Sram BB and not needed. The bearings themselves are good and the seals are as good as I've seen that are available for the BB90 bottom bracket. Overall I'm not extremely happy with the BB90's design when it comes to water resistance and having had to replace my bottom bracket bearings due to corrosion for the third time. This is no fault of the bearings or seals, but of how the bearings and seals are installed and arranged. This time around I overpacked the space between the bearing and seal with extra grease because I saw on the internet that doing so will reduce the ingress of water around the bearing. From now on though, I order and keep a set of bearings and seals as ready spares incase I experience a BB bearing failure. At the current price offered that's cheap insurance vs. having a bearing failure and having to wait for delivery of a spare set.
Jesse Pomerantz
Reviewed in the United States on September 3, 2016
These hold up well, are really easy to change and come at a great price. Having considered replacing with the ceramic version, its hard to justify triple the price when these are affordable and last a long time.
Recommended Products