Your cart is empty.
Your cart is empty.Only use the best for your car when you use Bardahl! Our Engine Tune-Up and Flush motor oil treatment is designed to catch remove gum, varnish, and sludge from your engine to unstick and clean critical components like lifters, rings, and valves while clearing oil gullies and passages! We use a proprietary combination of solvents, dispersants, detergents, and anti-wear additives designed to remove damaging contaminants from your engine with each flush. The results can be increased efficiency, performance, fuel economy, and extended vehicle life! This is a chemical engine tune up and engine cleaner flush that's made to capture removed deposits and keep them in suspension until your motor oil is drained. This motor oil additive is not meant to be used for the full life of your oil! We recommended adding Engine Tune Up and Flush about 100 to 200 miles before you intend to change your oil. You can also add it, run your engine at a fast idle for 20-30 minutes then flush. Just pour the contents of the bottle into the crankcase and be careful not to overfill. Then flush your oil and after 100-200 miles of driving and replace with new motor oil and a new oil filter. We recommend using one of Bardahl's oil enhancing treatments to your new motor oil. This includes one 12 oz bottle of Engine Tune-Up Exclusive Formula. At Bardahl we've been creating the best additives in America from our headquarters in Seattle, Washington for over 85 years. We've made our name a trusted source for mechanics, car enthusiasts, and in the world of motorsports with our constant commitment to quality and innovation.