Your cart is empty.
Your cart is empty.The Extreme Max Motorcycle Dolly is the perfect way to store your motorcycle and save space in your garage while you do so. Holding up to 1250 lbs., the low profile dolly allows the rider to roll their motorcycle straight on or off with minimal effort. Once on, unlock the caster wheels to freely glide the dolly anywhere in your garage. Stop pins at each and of the dolly chock the wheels and the side tray adjusts to fit kickstands on any standard-sized motorcycle. The Motorcycle Dolly is intended for use on smooth, hard surfaces only. It is recommended that the motorcycle be secured to the dolly before the wheel casters are unlocked and any movement is attempted. Not recommended for motorcycles with long wheelbases or extra-wide tires.
Curt N.
Reviewed in the United States on September 12, 2024
Once installed correctly (we were missing some parts....manufactured shipped replacements) it works great. You can easily maneuver your Moto around your garage....works better on epoxied garage floors. Note: You do need to have someone put their weight on the front of the ramp when loading the motorcycle. The ramp will move forward with the weight of the motorcycle. Once you have weight on the front of the ramp you can push/ride the Moto on the ramp and it won't move.
Gary Stewart
Reviewed in Canada on May 26, 2022
This unit is heavy, solid and super easy to use!
TechJunkie
Reviewed in the United States on December 12, 2022
It's a stout unit, except for the cheap bolts that are provided. I actually rung one off while putting this together. It's a pain to assemble to say the least and the text only instructions do not help at all. The only saving grace was the exploded parts diagram. After spending about 2 hours putting this together, I went to load up the bike on this. First thing I noticed that the kickstand tray was too short to accommodate the kickstand of the bike (Yamaha Vstar Classic 650) making the bike unstable and unable to push the dolly around without fear of the bike falling over. The plastic wheels were the final nail in the coffin. The only way this could roll around is if you have completely smooth floors. My garage has brushed concrete and the dolly once loaded was stuck, rendering the dolly useless and ultimately making the decision to return this product.
David F.
Reviewed in Canada on August 22, 2021
Works OK The screws for the kick stand extension are a little too long preventing the caster from swivelling. I added extra flat washers to raise the screw and it all cleared. It is made solid no problem taking the weight of the bike. I took the short model which 3 inches of spare. Be sure to measure your bike center to center friand back to see if the shorter (cheaper) version works for you.
Mark
Reviewed in the United States on July 2, 2021
I searched for a dolly that would work for my BMW 650gt given the space in my small garage so I could put my new car in the garage with the bike. See pics. After an exhaustive search I settled on the only option that appeared to fit the space requirements, appeared safe to roll around, easy to get on and off did not require a lot of physical effort to manipulate into position.This product appeared to be the best choice and in the end, it was.I was concerned about the reviewers that said the instructions were worthless. THAT IS NOT TRUE. They were more than adequate. I took my time (4.5 hours) putting it together on my kitchen island. I would recommend that as maybe some of the frustration is in bending over for sustained periods of time.The reviewer who mentioned using the cardboard packing material in the box to lift the wheels higher to bolt them on...brilliant.The reviewer who said that the flanges (or indents) for the bolts that attach the kickstand plate to the ramp are reverse... on the wrong side...absolutely correct. You have to put those bolts in from the top of the ramp and just live with them not being recessed. For some reason the manufacturer did not admit this error in the reviews.The reviewer who said that if you put the bolts on for the wheels as instructed the wheels will not rotate...WRONG. You did not tighten the bolts all the way. If you did you would see that it clears the wheel by the tiniest amount of space,,,although I can see why you would be frustrated if you were hunched over for a period of time to only to deduce this might not work.....ON THE SAME SUBJECT...most of my time was spent putting these wheels on. The manufacturer says nothing about how tight the space is to work in when putting the wheels on...they conveniently leave you to discover that and it is annoying but I do not know how that would have been solved with this footprint.The reviewer who put rubber pads on the ramp boots...excellent idea. My garage floor is smooth and I want to keep it that way for ease of rolling the dolly around.Summary...the most repeated criticism is how bad the instructions are...apparently those who wrote that might not know what bad instructions are from some goods manufactured in China. These instructions, with the exception of the above, are far better than average. They give you the exact amount of nuts, bolts and washers...NOT EVEN ONE MORE. I suggest you lay them out with the alike together which made it so much easier.Take your time! You will find it far less frustrating setting aside an afternoon than half reading the instructions and throwing the ramp together only to be frustrated and blame the instructions. If you can elevate the ramp to at least waist height.during assembly in AC or heated indoors...DO IT!Good product and I am glad I bought it.
Stephen
Reviewed in Canada on July 16, 2021
Purchased this dolly so that I can position my motorcycle against a wall and also move it around for easy exit by spinning it around freely. Quality is great with thick heavy steel and the pieces and holes lining up well. You do get a bag of bolts, nuts and washers... I recommended sorting them out before assembling. Instructions is essentially a diagram, it's enough to figure things out. Works great, rolls well on a clean garage floor - highly recommend!
John Riggins
Reviewed in Canada on December 23, 2021
Great product, fast shipping, easy assembly… great experience all around. Would not hesitate to purchase from this seller in the future.
Christopher Forestt
Reviewed in the United States on July 13, 2019
Overall, I am happy with the product and recommended. The directions are relatively simple and put on only one sheet. They are simple but relatively small in the diagrams. I am assuming they figure that if you can't figure it out with the relatively simple instructions that maybe you shouldn't be riding a motorcycle anyway. my only issue with the assembly is that it is kind of tight around the caster wheels to get the bolts in and hold them to tighten them up.I did not need special tools but it was a little more difficult than I expected it to be. If you're not careful it can become a knuckle buster job. The other surprise for me was the considerable effort it takes to move the motorcycle around. It simply doesn't "roll" as easy as I expected it to when the bike is on it. When "empty," it moves very easily. My motorcycle is a Yamaha Venture "dresser," so it's not light; but also not overly heavy. I'm a relatively sturdy guy. So it's not me. I feel to really maneuver the bike around, it feels like I have to be careful not to push it over, off the dolly. The ramps are a little annoying in that it can be an issue to keep both down when needed. You put one down, then it flips up when you do the other, unless you lift a little. This is not a big deal, but worth mentioning. Again, overall, I do recommend the product.
Jeff Molson
Reviewed in Canada on October 24, 2018
Assembly went well. The dolly works well with my road bike (old 73 Bonneville). The piece for the kick stand should be the last thing you put on and only after you have figured out where the bike will sit on the dolly since there are several possible locations for this part. I found the bottom of the kickstand holder a bit low and the bike was leaning on too much of an angle. A small piece of 2X4 under the kickstand did the trick.The "flip-ups" at each end work very well and are easy to flip to get the bike on and off the dolly from either end.This dolly rolls well on concrete and I can put my bike in a corner in the garage out of the way for the winter.Tie-down points would have been nice, but since in my case the dolly will be pretty stationary, it is not a big deal.This gets a 5 star because it works as it should and the price is decent.
Recommended Products
$35.79
$ 18 .99 $18.99